274
Views
14
CrossRef citations to date
0
Altmetric
Original article

Bipolar Radiofrequency ablation: Is the shape of the coagulation volume different in comparison to monopolar RF‐ablation using variable active tip lengths?

, , , &
Pages 267-274 | Published online: 10 Jul 2009
 

Abstract

We investigated the differences between bipolar and monopolar radiofrequency (RF)‐ablation devices regarding the shape and volume of the induced coagulation zone. RF‐ablations were performed in freshly excised porcine liver. For bipolar RF‐ablation needle electrodes with 9, 20 and 30 mm active tip lengths were used. Each electrode was used ten times in accordance with the vendor's recommended ablation protocol. For monopolar RF‐ablation a needle electrode was also used. Active tip length was modified by removing parts of the insulation resulting in tips lengths of 9, 20 and 30 mm. The lesion shape and volume were calculated and compared. In general, lesion size increased with increasing active tip length. At 9 mm tip length lesion volumes were significantly larger using the monopolar RF‐system (0.598±0.094 cm3 vs. 0.139±0.028 cm3). At 20 and 30mm tip length bipolar RF‐ablation created significantly larger areas of necrosis (20 mm: 3.498±0.605 cm3 vs. 2.569±0,620 cm3, 30 mm: 7.441±906 cm3 vs. 3.317±0.737 cm3). Using the probes with 9 mm, active length areas of necrosis induced by the monopolar system are more spherical, whereas with 20 and 30 mm active tip length the bipolar system creates more spherical lesions. The proper combination of RF‐system and electrode length allows to individually adapt the shape and volume of the generated coagulation necrosis to the target lesion.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.