Staining Paraffin Sections Without Prior Removal of the Wax

Abstract

Paraffin sections are usually rehydrated before staining. It is possible to apply aqueous dye solutions without first removing the wax. Staining then occurs more slowly, and only if the embedding medium has not melted or become unduly soft after catting. To avoid this problem, sections are flattened on water no hotter than 45 C and dried overnight at 40 C. Minor technical modifications to the staining procedures are needed. Mercury deposits are removed by iodine, and a 3% solution of sodium thiosnlfate in 60% ethanol is used to remove the iodine from paraffin sections. At room temperature, progressive staining takes 10–20 tunes longer for sections in paraffin than for hydrated sections; at 45 C, this can be shortened to about three times the regular staining time. After staining, the slides are rinsed in water, air dried, dewaxed with xylene, and coverslipped in the usual way. Nuclear staining in the presence of wax was achieved with toluidine blue, O, alum-hematoxylin and Weigert's iron-hematoxylin. Eosin and van Gieson's picric acid-acid fuchsine were effective anionic counterstains. A one-step trichrome mixture containing 3 anionic dyes and phosphomolybdic acid was unsuitable for sections in wax because it Imparted colors that were nninformative and quite different from those obtained with hydrated sections. Advantages of staining in the presence of wax include economy of solvents, reduced risk of overstaining and strong adhesion of sections to slides.

Key Words:

• methods paraffin wax
• sections
• staining