222
Views
8
CrossRef citations to date
0
Altmetric
Original Article

Attempted unreamed nailing in tibial fractures: A prospective consecutive series of 55 patients

&
Pages 301-305 | Received 13 Jan 1997, Accepted 13 Feb 1998, Published online: 08 Jul 2009
 

Abstract

We evaluated the possibility of unreamed insertion of an intramedullary nail (IMN) in a consecutive series of 55 tibial shaft fractures in 55 patients (30 men). 43 fractures were closed and 12 fractures were open. All surgeons involved were instructed to try unreamed insertion primarily. Selection of nail diameter was based on measurements of the narrowest part of the medullary canal on preoperative AP- and lateral radiographs, with a millimeter-ruler. Of the 25 cases where a 9 mm nail was chosen, 10 were impossible to insert without reaming. An 8 mm nail was selected in the remaining 30 cases, and here 10 required reaming. Mean time-to-union was 4.2 months. Delayed union was noted in 9 patients of whom 6 had been stabilized with an unreamed nail. The concept of unreamed insertion must be questioned since this could be done in only 35 patients and, in addition, we were not able to demonstrate any significant differences in time-to-union in fractures stabilized with an unreamed or a reamed nail. Implant failures were seen in 5 patients, all stabilized with an 8 mm nail. Failure of interlocking screws did not affect the final outcome. However, a possible combination of screw breakage and healing disturbances may lead to the need for more complex surgical procedures. Due to these reasons and the fact that the 8 mm nail could not be inserted unreamed in 10 of 30 patients, we stopped using the 8 mm nail.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.