Advanced search
Publication Cover
Acta Odontologica Scandinavica Volume 73, 2015 - Issue 8
Journal homepage
2,703
Views
144
CrossRef citations to date
0
Altmetric
Original Article

Fracture resistance of monolithic zirconia molar crowns with reduced thickness

Keisuke NakamuraDepartment of Prosthetic Dentistry/Dental Materials Science, Institute of Odontology, University of Gothenburg, Gothenburg, Sweden;Laboratory for Redox Regulation, Tohoku University Graduate School of Dentistry, Sendai, JapanCorrespondence[email protected]
,
Akio HaradaDivision of Molecular and Regenerative Prosthodontics, Tohoku University Graduate School of Dentistry, Sendai, Japan
,
Ryoichi InagakiTohoku University School of Dental Laboratory Technicians, Sendai, Japan
,
Taro KannoDivision of Molecular and Regenerative Prosthodontics, Tohoku University Graduate School of Dentistry, Sendai, Japan
,
Yoshimi NiwanoLaboratory for Redox Regulation, Tohoku University Graduate School of Dentistry, Sendai, Japan
,
Percy MilledingDepartment of Prosthetic Dentistry/Dental Materials Science, Institute of Odontology, University of Gothenburg, Gothenburg, Sweden
&
Ulf ÖrtengrenDepartment of Prosthetic Dentistry/Dental Materials Science, Institute of Odontology, University of Gothenburg, Gothenburg, Sweden;Department of Clinical Dentistry/Faculty of Health Sciences, The Arctic University of Norway, Tromsø, Norway
 show all
Pages 602-608 | Received 23 Aug 2014, Accepted 07 Jan 2015, Published online: 30 Jan 2015

Citations (144)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

Noor Al Mortadi, Khaled Bataineh & Mohammad Al Janaideh. (2020) Fatigue Failure Load of Molars with Thin-Walled Prosthetic Crowns Made of Various Materials: A 3D-FEA Theoretical Study. Clinical, Cosmetic and Investigational Dentistry 12, pages 581-593.
Read now
Marit Øilo, Christian Schriwer, Brian Flinn & Nils Roar Gjerdet. (2019) Monolithic zirconia crowns – wall thickness, surface treatment and load at fracture. Biomaterial Investigations in Dentistry 6:1, pages 13-22.
Read now
Tijana Stijacic, Wenjie Hu, Kwok-Hung Chung, Cheng Zheng, Brian D. Flinn & Ariel J. Raigrodski. (2019) Fatigue reliability of dental ceramic materials – an in vitro study. Advances in Applied Ceramics 118:1-2, pages 56-61.
Read now
Fahad Bakitian, Przemek Seweryniak, Evaggelia Papia, Christel Larsson & Per Vult von Steyern. (2018) Effect of different semimonolithic designs on fracture resistance and fracture mode of translucent and high-translucent zirconia crowns. Clinical, Cosmetic and Investigational Dentistry 10, pages 51-60.
Read now
Jianmin Han, Jing Zhao & Zhijian Shen. (2017) Zirconia ceramics in metal-free implant dentistry. Advances in Applied Ceramics 116:3, pages 138-150.
Read now
Fahad Bakitian, Przemek Seweryniak, Evaggelia Papia, Christel Larsson & Per Vult von Steyern. (2017) Fracture strength of veneered translucent zirconium dioxide crowns with different porcelain thicknesses. Acta Biomaterialia Odontologica Scandinavica 3:1, pages 74-83.
Read now
Keisuke Nakamura, Mathieu Mouhat, John Magnus Nergård, Solveig Jenssen Lægreid, Taro Kanno, Percy Milleding & Ulf Örtengren. (2016) Effect of cements on fracture resistance of monolithic zirconia crowns. Acta Biomaterialia Odontologica Scandinavica 2:1, pages 12-19.
Read now
Özlem Malkondu, Neslihan Tinastepe, Ender Akan & Ender Kazazoğlu. (2016) An overview of monolithic zirconia in dentistry. Biotechnology & Biotechnological Equipment 30:4, pages 644-652.
Read now
Nizamettin Palta, Asli Secilmis & Huseyin Yazicioglu. (2016) Effect of monolithic zirconia on the degree of conversion of two resin cements analyzed by FT-IR/ATR spectroscopy. Journal of Adhesion Science and Technology 30:9, pages 972-982.
Read now

Articles from other publishers (135)

Pablo Machado Soares, Lucas Saldanha da Rosa, Gabriel Kalil Rocha Pereira, Luiz Felipe Valandro, Marilia Pivetta Rippe, Amanda Maria de Oliveira Dal Piva, Albert J. Feilzer, Cornelis J. Kleverlaan & João Paulo Mendes Tribst. (2023) Mechanical Behavior of Repaired Monolithic Crowns: A 3D Finite Element Analysis. Dentistry Journal 11:11, pages 254.
Crossref
Ernesto B. Benalcazar Jalkh, Ilana S. Ramalho, Edmara T. P. Bergamo, Larissa M. M. Alves, Ricardo Tanaka, Lukasz Witek, Paulo G. Coelho, Ronaldo Hirata & Estevam A. Bonfante. (2023) Ultrathin lithium disilicate and translucent zirconia crowns for posterior teeth: Survival and failure modes. Journal of Esthetic and Restorative Dentistry.
Crossref
Jianpeng Sun, Jingang Jiang, Zhonghao Xue, Hongyuan Ma, Jie Pan & Kun Qian. (2023) Mechanical properties of cracked teeth with different dental materials and crown parameters: An in vitro proof-of-concept. Journal of the Mechanical Behavior of Biomedical Materials 145, pages 106045.
Crossref
Ashraf Refaie, Christoph Bourauel, Ahmed Mahmoud Fouda, Ludger Keilig & Lamia Singer. (2023) The effect of cyclic loading on the fracture resistance of 3D-printed and CAD/CAM milled zirconia crowns—an in vitro study. Clinical Oral Investigations.
Crossref
Gelson Luis Adabo, Diogo Longhini, Mariana Ribeiro Baldochi, Edmara Tatiely Pedroso Bergamo & Estevam Augusto Bonfante. (2023) Reliability and lifetime of lithium disilicate, 3Y-TZP, and 5Y-TZP zirconia crowns with different occlusal thicknesses. Clinical Oral Investigations 27:7, pages 3827-3838.
Crossref
Ali Robaian, Abdullah Alqahtani, Khalid Alanazi, Abdulrhman Alanazi, Meshal Almalki, Anas Aljarad, Refal Albaijan, Ahmed Maawadh, Aref Sufyan & Mubashir Baig Mirza. (2023) Different Designs of Deep Marginal Elevation and Its Influence on Fracture Resistance of Teeth with Monolith Zirconia Full-Contour Crowns. Medicina 59:4, pages 661.
Crossref
Fereshte Rezaie, Masoud Farshbaf, Mohammad Dahri, Moein Masjedi, Reza Maleki, Fatemeh Amini, Jonathan Wirth, Keyvan Moharamzadeh, Franz E. Weber & Lobat Tayebi. (2023) 3D Printing of Dental Prostheses: Current and Emerging Applications. Journal of Composites Science 7:2, pages 80.
Crossref
Denny Chao & Ting-Ling Chang. (2023) Use of zirconia onlays in a maxillary removable implant-supported denture: A clinical report. The Journal of Prosthetic Dentistry 129:2, pages 251-256.
Crossref
Ramtin Sadid‐Zadeh. 2023. Clinical Applications of Digital Dental Technology. Clinical Applications of Digital Dental Technology 122 153 .
Kinga Mária Jánosi, Diana Cerghizan, Zsigmond Rétyi, Alpár Kovács, Andrea Szász, Izabella Mureșan, Aurița Ioana Albu & Liana Georgiana Hănțoiu. (2023) Influence of the Operator`s Experience, Working Time, and Working Position on the Quality of the Margin Width: In Vitro Study. Medicina 59:2, pages 244.
Crossref
Nasser M. Alqahtani, Saurabh Chaturvedi, Shobhit Singh Tomar, Lalima Kumari, Shruti Gill, Kamal Nayan, Mansoor Shariff, Tushar V. Bhagat, Mohammed Khalid Addas & Mudita Chaturvedi. (2023) Fracture toughness of 3D printed denture teeth. Technology and Health Care 31:1, pages 247-258.
Crossref
Vahap Çin, Ayça Deniz İzgi, Ediz Kale & Burak Yilmaz. (2023) Marginal and Internal Fit of Monolithic Zirconia Crowns Fabricated by Using Two Different CAD-CAM Workflows: An In Vitro Study. Prosthesis 5:1, pages 35-47.
Crossref
Atiwat Jaroenpiboon, Pongsakorn Apinsathanon, Pheeradej Na Nan & Napapa Aimjirakul. (2023) The Effects of Abutment Finish Lines on the Penetration Characteristics of Elastomers into the Simulated Gingival Sulcus. European Journal of Dentistry.
Crossref
Shinya Oishi, Wataru Komada, Ruri Tsukahara, Shu Yoshimatsu, Daiki Kondo, Satoshi Omori, Kosuke Nozaki, Hiroyuki Miura & Kenji Fueki. (2023) A composite resin core with a new zirconia tube reduces the surface strain at the cervical area of a mandibular molar: A model tooth study. Journal of Prosthodontic Research 67:1, pages 70-76.
Crossref
Ahmed Mahmoud Fouda, Osama Atta, Mutlu Özcan, Bogna Stawarczyk, Robert Glaum & Christoph Bourauel. (2022) An investigation on fatigue, fracture resistance, and color properties of aesthetic CAD/CAM monolithic ceramics. Clinical Oral Investigations 27:6, pages 2653-2665.
Crossref
Yunus Emre Ozden, Mustafa Baris Guncu, Guliz Aktas & Senay Canay. (2022) Effect of sintering time on the marginal and internal fit of monolithic zirconia crowns containing 3–4 mol% Y2O3. BMC Oral Health 22:1.
Crossref
Anneli Skjold, Christian Schriwer, Nils Roar Gjerdet & Marit Øilo. (2022) Fractographic analysis of 35 clinically fractured bi-layered and monolithic zirconia crowns. Journal of Dentistry 125, pages 104271.
Crossref
Max L. Pöppel, Martin Rosentritt, Richard Sturm, Florian Beuer, Jeremias Hey, Alois Schmid & Franziska Schmidt. (2022) Fracture Load and Fracture Patterns of Monolithic Three-Unit Anterior Fixed Dental Prostheses after In Vitro Artificial Aging—A Comparison between Color-Gradient and Strength-Gradient Multilayer Zirconia Materials with Varying Yttria Content. Journal of Clinical Medicine 11:17, pages 4982.
Crossref
Alev AKSOY, Çetin SEVÜK & Gülümser EVLİOĞLU. (2022) The Relationship of Zirconium Thickness Used in Crown Bridge Prosthesis with Tooth Preparation. Black Sea Journal of Health Science.
Crossref
Chaker Fares, Randy Elhassani, Fan Ren, Alexandra R. Cabrera, Ingrid Chai, Dan Neal, Shu-Min Hsu & Josephine F. Esquivel-Upshaw. (2022) Color perceptibility and validity of silicon carbide–based protective coatings for dental ceramics. The Journal of Prosthetic Dentistry 127:6, pages 918-924.
Crossref
Gian Battista Greco, Davide Popi & Danilo Alessio Di Stefano. (2022) Accuracy of 3-dimensional printing of dental casts: A proposal for quality standardization. The Journal of Prosthetic Dentistry 127:6, pages 899-910.
Crossref
Camille Haddad & Kathy Azzi. (2022) Influence of the Type and Thickness of Cervical Margins on the Strength of Posterior Monolithic Zirconia Crowns: A Review. European Journal of General Dentistry 11:02, pages 073-080.
Crossref
Yener Okutan, Yasemin Gundogdu, Hamdi Sukur Kilic, Banucicek Kandemir & Munir Tolga Yucel. (2022) Femtosecond laser microstructuring of monolithic zirconia: Effects of laser parameters on resin bond strength. International Journal of Applied Ceramic Technology.
Crossref
ZHENHUA WANG, ZHIWEI ZHOU, YIFAN LI, WANQIONG NIU & LIJUAN REN. (2022) EFFECT OF GRAIN-BOUNDARY SEGREGATION ON LOW-TEMPERATURE DEGRADATION OF ORAL 3Y-TZP CERAMICS CO-DOPED WITH GEO 2 AND TIO 2 . Journal of Mechanics in Medicine and Biology 22:03.
Crossref
Kuljirarnat Jitwirachot, Pimduen Rungsiyakull, Julie A. Holloway & Wissanee Jia-mahasap. (2022) Wear Behavior of Different Generations of Zirconia: Present Literature. International Journal of Dentistry 2022, pages 1-17.
Crossref
Shinji Takemoto, Tomofumi Sawada & Kaori Sasaki. (2022) Esthetic Restoration on Metallic Materials in Dentistry歯科臨床で利用される審美修復物. Materia Japan 61:3, pages 139-146.
Crossref
Marwah Ismael Abdulazeez & Manhal A. Majeed. (2021) Fracture Strength of Monolithic Zirconia Crowns with Modified Vertical Preparation: A Comparative In Vitro Study. European Journal of Dentistry 16:01, pages 209-214.
Crossref
Saif H. AL-QAYSI, Abdul Rahman MOHAMMED SALEH & Hatem M. EL-DAMANHOURY. (2022) Fracture resistance and failure mode of layered translucent zirconia with different crown designs. Dental Materials Journal 41:1, pages 54-59.
Crossref
Andrzej Malysa, Joanna Wezgowiec, Wojciech Grzebieluch, Dariusz P. Danel & Mieszko Wieckiewicz. (2022) Effect of Thermocycling on the Bond Strength of Self-Adhesive Resin Cements Used for Luting CAD/CAM Ceramics to Human Dentin. International Journal of Molecular Sciences 23:2, pages 745.
Crossref
AlWaleed Abushanan, Rajashekhara B. Sharanesha, Bader Aljuaid, Tariq Alfaifi & Abdullah Aldurayhim. (2022) Fracture Resistance of Primary Zirconia Crowns: An In Vitro Study. Children 9:1, pages 77.
Crossref
Layla Abukabbos, Je Uk Park & Wonsup Lee. (2022) The effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns. The Journal of Korean Academy of Prosthodontics 60:2, pages 135.
Crossref
Yong-Kyu Kim, Hyung-In Yoon, Dae-Joon Kim & Jung-Suk Han. (2022) Comparative analysis on intaglio surface trueness, wear volume loss of antagonist, and fracture resistance of full-contour monolithic zirconia crown for single-visit dentistry under simulated mastication. The Journal of Advanced Prosthodontics 14:3, pages 173.
Crossref
Midori Goto, Kyosuke Oki, Kiyoshi Koyano & Yasunori Ayukawa. (2022) The 3-year cumulative survival rates of posterior monolithic zirconia crowns and their antagonist teeth, and their influencing factors. Journal of Oral Science 64:4, pages 286-289.
Crossref
Celina Inês Miranda Brito Leitão, Gustavo Vicentis de Oliveira Fernandes, Luís Pedro Pereira Azevedo, Filipe Miguel Araújo, Helena Donato & André Ricardo Maia Correia. (2022) Clinical performance of monolithic CAD/CAM tooth-supported zirconia restorations: systematic review and meta-analysis. Journal of Prosthodontic Research 66:3, pages 374-384.
Crossref
Moritz Waldecker, Rouven Behnisch, Peter Rammelsberg & Wolfgang Bömicke. (2022) Five-year clinical performance of monolithic and partially veneered zirconia single crowns—a prospective observational study. Journal of Prosthodontic Research 66:2, pages 339-345.
Crossref
Keisuke Nakamura, Aria Tarkeshi, Alexander Niklasson, Shunichi Shishido, Per Svanborg, Sargon Barkarmo & Ulf Örtengren. (2022) Influence of crystalline phase transformation induced by airborne-particle abrasion and low-temperature degradation on mechanical properties of dental zirconia ceramics stabilized with over 5 mol% yttria. Journal of the Mechanical Behavior of Biomedical Materials 125, pages 104890.
Crossref
Chan-Ho Park, Kyung-Ho Ko, Chan-Jin Park, Lee-Ra Cho & Yoon-Hyuk Huh. (2021) Review on factors affecting the optical properties of dental zirconia. Journal of Dental Rehabilitation and Applied Science 37:4, pages 177-185.
Crossref
Zhenyu Tang, Xinyi Zhao & Hui Wang. (2021) Quantitative analysis on the wear of monolithic zirconia crowns on antagonist teeth. BMC Oral Health 21:1.
Crossref
Ana Carolina Cadore-Rodrigues, Renan Vaz Machry, Camila Pauleski Zucuni, Gabriel Kalil Rocha Pereira & Luiz Felipe Valandro. (2021) Grinding and polishing of the inner surface of monolithic simplified restorations made of zirconia polycrystals and lithium disilicate glass-ceramic: Effects on the load-bearing capacity under fatigue of the bonded restorations. Journal of the Mechanical Behavior of Biomedical Materials 124, pages 104833.
Crossref
Shunsuke SHIBATA, Katsunori TORII & Junko TANAKA. (2021) Fracture strength of secondary crown with different taper and thickness in zirconia double crown attachments. Dental Materials Journal 40:6, pages 1303-1308.
Crossref
Moon-Chun Kong & Mi-Gyoung Park. (2021) Effect of sintering condition and low-temperature degradation on the flexural strength and phase transformation of zirconia. The Journal of Prosthetic Dentistry 126:5, pages 692.e1-692.e14.
Crossref
Walid Al-Zordk, Alaa Saudi, Abdelraheem Abdelkader, Mansoura Taher & Mohamed Ghazy. (2021) Fracture Resistance and Failure Mode of Mandibular Molar Restored by Occlusal Veneer: Effect of Material Type and Dental Bonding Surface. Materials 14:21, pages 6476.
Crossref
Haneen A. Sadeqi, Mirza Rustum Baig & Mohammad Al-Shammari. (2021) Evaluation of Marginal/Internal Fit and Fracture Load of Monolithic Zirconia and Zirconia Lithium Silicate (ZLS) CAD/CAM Crown Systems. Materials 14:21, pages 6346.
Crossref
Niwut Juntavee, Apa Juntavee & Sirintana Phetpanompond. (2021) Biaxial Flexural Strength of High-Translucence Monolithic Ceramics upon Various Thicknesses. The Scientific World Journal 2021, pages 1-10.
Crossref
Ramtin Sadid-Zadeh, Hadjer Sahraoui, Brian Lawson & Robert Cox. (2021) Assessment of Tooth Preparations Submitted to Dental Laboratories for Fabrication of Monolithic Zirconia Crowns. Dentistry Journal 9:10, pages 112.
Crossref
Suchada Kongkiatkamon, Kittipong Booranasophone, Apichat Tongtaksin, Valailuck Kiatthanakorn & Dinesh Rokaya. (2021) Comparison of Fracture Load of the Four Translucent Zirconia Crowns. Molecules 26:17, pages 5308.
Crossref
Christian Schriwer, Nils Roar Gjerdet, Dwayne Arola & Marit Øilo. (2021) The effect of preparation taper on the resistance to fracture of monolithic zirconia crowns. Dental Materials 37:8, pages e427-e434.
Crossref
Sedanur TURGUT, Hamiyet KILINÇ, Elif AYDOĞAN AYAZ & Bora BAĞIŞ. (2021) MONOLİTİK ZİRKONYA RESTORASYONLARIN SONUÇ RENK VE TRANSLUSENSİ ÖZELLİKLERİNE FARKLI TİP YAPIŞTIRMA SİMANLARININ ETKİSİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, pages 1-1.
Crossref
Niwut Juntavee, Apa Juntavee & Sasiprapa Kornrum. (2020) Influence of Margin Designs on Crack Initiation of High Translucency Monolithic Zirconia Crowns. Journal of Prosthodontics 30:6, pages 490-499.
Crossref
Renan Vaz Machry, Alexandre Luiz Souto Borges, Gabriel Kalil Rocha Pereira, Cornelis Johannes Kleverlaan, Andressa Borin Venturini & Luiz Felipe Valandro. (2021) Influence of the foundation substrate on the fatigue behavior of bonded glass, zirconia polycrystals, and polymer infiltrated ceramic simplified CAD-CAM restorations. Journal of the Mechanical Behavior of Biomedical Materials 117, pages 104391.
Crossref
Paula Pontevedra, Carlos Lopez‐Suarez, Jesus Pelaez, Sara Garcia‐Serdio & Maria J Suarez. (2020) Prospective Clinical Evaluation of Posterior Monolithic Zirconia Fixed Partial Dentures Using a Complete Digital Workflow: Two‐Year Follow‐Up. Journal of Prosthodontics 30:4, pages 298-304.
Crossref
Renan V. Machry, Ana Carolina Cadore-Rodrigues, Alexandre Luiz S. Borges, Gabriel K.R. Pereira, Cornelis J. Kleverlaan, Andressa B. Venturini & Luiz Felipe Valandro. (2021) Fatigue resistance of simplified CAD–CAM restorations: Foundation material and ceramic thickness effects on the fatigue behavior of partially- and fully-stabilized zirconia. Dental Materials 37:4, pages 568-577.
Crossref
Ali Dogus Yilmaz & Yener Okutan. (2020) Effect of air‐abrasion at pre‐ and/or post‐sintered stage and hydrothermal aging on surface roughness, phase transformation, and flexural strength of multilayered monolithic zirconia. Journal of Biomedical Materials Research Part B: Applied Biomaterials 109:4, pages 606-616.
Crossref
Melih ULGEY & Oguzhan GORLER. (2021) The Effect of Different Acid Treatments on Shear Bond Strength Between Monolithic Zirconia and Dentin SurfaceMonolitik Zirkonya Materyalinin Dentine Bağlanma Dayanımı Üzerine Farklı Tür Asit Yüzey Uygulamalarının Etkilerinin Araştırılması. Cumhuriyet Dental Journal 24:1, pages 1-9.
Crossref
Maximiliane A. Schlenz, Carsten Fiege, Alexander Schmidt & Bernd Wöstmann. (2021) Microleakage of thin-walled monolithic zirconia and polymer-containing CAD-CAM crowns. The Journal of Prosthetic Dentistry 125:2, pages 316-322.
Crossref
Andreas Kessler, Svetlana Kapor, Kurt Erdelt, Reinhard Hickel, Daniel Edelhoff, Andreas Syrek, Jan-Frederik Güth & Jan Kühnisch. (2021) Two-body wear and fracture behaviour of an experimental paediatric composite crown in comparison to zirconia and stainless steel crowns dependent on the cementation mode. Dental Materials 37:2, pages 264-271.
Crossref
Lea Sophia Prott, Frank Akito Spitznagel, Estevam Augusto Bonfante, Meike Anne Malassa & Petra Christine Gierthmuehlen. (2021) Monolithic zirconia crowns: effect of thickness reduction on fatigue behavior and failure load. The Journal of Advanced Prosthodontics 13:5, pages 269.
Crossref
Saurabh Chaturvedi, Turki Alqahtani, Saleh Alsolami, Abdulbari Alqahtani, Gotam Das & Ebrahim Alsubaiy. (2021) Fracture resistance of CAD-CAM all-ceramic surveyed crowns with different occlusal rest seat designs. The Journal of Advanced Prosthodontics 13:1, pages 36.
Crossref
Syuntaro Nomoto, Tomotoshi Masuda, Toru Sato, Mariko Yumoto, Gen Kuroishi, Yosuke Maeda, Mizuho Hirano & Hideshi Sekine. (2021) Influence of Tooth Mold Materials in Composite Resin CAD/CAM Crown Destructive Test. The Bulletin of Tokyo Dental College 62:1, pages 15-26.
Crossref
Mª Fernanda Solá-Ruiz, Mar Baixauli-López, Ana Roig-Vanaclocha, Jose Amengual-Lorenzo & Rubén Agustín-Panadero. (2021) Prospective study of monolithic zirconia crowns: clinical behavior and survival rate at a 5-year follow-up. Journal of Prosthodontic Research 65:3, pages 284-290.
Crossref
Shoko Miura, Shinobu Yamauchi, Shin Kasahara, Yusuke Katsuda, Masanori Fujisawa & Hiroshi Egusa. (2021) Clinical evaluation of monolithic zirconia crowns: a failure analysis of clinically obtained cases from a 3.5-year study. Journal of Prosthodontic Research 65:2, pages 148-154.
Crossref
Akio Harada, Shunichi Shishido, Sargon Barkarmo, Ryoichi Inagaki, Taro Kanno, Ulf Örtengren, Hiroshi Egusa & Keisuke Nakamura. (2020) Mechanical and microstructural properties of ultra-translucent dental zirconia ceramic stabilized with 5 mol% yttria. Journal of the Mechanical Behavior of Biomedical Materials 111, pages 103974.
Crossref
Eleana Kontonasaki, Panagiotis Giasimakopoulos & Athanasios E. Rigos. (2020) Strength and aging resistance of monolithic zirconia: an update to current knowledge. Japanese Dental Science Review 56:1, pages 1-23.
Crossref
Martin Rosentritt, Verena Preis, Michael Behr & Thomas Strasser. (2020) Fatigue and wear behaviour of zirconia materials. Journal of the Mechanical Behavior of Biomedical Materials 110, pages 103970.
Crossref
Faisal KAYALI & Erkut KAHRAMANOĞLU. (2020) COMPARISON OF FRACTURE RESISTANCE BETWEEN TWO MONOLITHIC AND ONE VENEERED ZIRCONIA MATERIALS ON MOLAR CROWNS AFTER THERMOMECHANICAL FATIGUE. Clinical and Experimental Health Sciences 10:3, pages 320-326.
Crossref
Niwut Juntavee & Sasiprapa Kornrum. (2020) Effect of Marginal Designs on Fracture Strength of High Translucency Monolithic Zirconia Crowns. International Journal of Dentistry 2020, pages 1-10.
Crossref
Mladen Bencun, Andreas Ender, Daniel B. Wiedemeier & Albert Mehl. (2020) Fracture Load of CAD/CAM Feldspathic Crowns Influenced by Abutment Material. Materials 13:15, pages 3407.
Crossref
Felicitas Wiedenmann, Regina Pfefferle, Axel Reichert, Eva Jerman & Bogna Stawarczyk. (2020) Impact of high-speed sintering, layer thickness and artificial aging on the fracture load and two-body wear of zirconia crowns. Dental Materials 36:7, pages 846-853.
Crossref
Anastasia Katsavochristou, Marianella Sierraalta, Berna Saglik, Dimitrios Koumoulis, Furat George & Michael Razzoog. (2019) Implant Angulation Effect on the Fracture Resistance of Monolithic Zirconia Custom Abutments: An In Vitro Study. Journal of Prosthodontics 29:5, pages 394-400.
Crossref
Ediz Kale, Mesutcan Cilli, Tuncer Burak Özçelik & Burak Yilmaz. (2020) Marginal fit of CAD-CAM monolithic zirconia crowns fabricated by using cone beam computed tomography scans. The Journal of Prosthetic Dentistry 123:5, pages 731-737.
Crossref
María Fernanda Solá-Ruíz, Alejandra Baima-Moscardó, Eduardo Selva-Otaolaurruchi, José María Montiel-Company, Rubén Agustín-Panadero, Carla Fons-Badal & Lucía Fernández-Estevan. (2020) Wear in Antagonist Teeth Produced by Monolithic Zirconia Crowns: A Systematic Review and Meta-Analysis. Journal of Clinical Medicine 9:4, pages 997.
Crossref
Islam Abd Alraheam, Terry Donovan, Lee Boushell, Ryan Cook, André V. Ritter & Taiseer A. Sulaiman. (2020) Fracture load of two thicknesses of different zirconia types after fatiguing and thermocycling. The Journal of Prosthetic Dentistry 123:4, pages 635-640.
Crossref
Takashi Nakamura, Yoshiro Nakano, Hirofumi Usami, Shinya Okamura, Kazumichi Wakabayashi & Hirofumi Yatani. (2020) In vitro investigation of fracture load and aging resistance of high-speed sintered monolithic tooth-borne zirconia crowns. Journal of Prosthodontic Research 64:2, pages 182-187.
Crossref
Claudinei dos Santos, Gabriel Oliveira Rosa, Manara Nogueira Quintino, Manuel Fellipe Rodrigues Pais Alves, Sebastião Ribeiro & Claudio Luis Melo-Silva. (2020) Effect of surface finishing and thickness on the translucency of zirconia dental ceramics. Ceramics International 46:6, pages 7748-7755.
Crossref
Alvaro Limones, Pedro Molinero-Mourelle, Luis Azevedo, Marta Romeo-Rubio, André Correia & Miguel Gómez-Polo. (2020) Zirconia-ceramic versus metal-ceramic posterior multiunit tooth-supported fixed dental prostheses. The Journal of the American Dental Association 151:4, pages 230-238.e7.
Crossref
Ramtin Sadid‐Zadeh, Joseph T. DeLuca, Hema Arany & Rui Li. (2020) Assessment of Teeth Prepared by Senior Dental Students for CAD/CAM Restorations. Journal of Dental Education 84:3, pages 358-366.
Crossref
Collin D Holman. (2020) Assessing Flexural Strength Degradation of New Cubic Containing Zirconia Materials. The Journal of Contemporary Dental Practice 21:2, pages 114-118.
Crossref
Maria Luiza Auzani, Kiara Serafini Dapieve, Camila Pauleski Zucuni, Gabriel Kalil Rocha Pereira & Luiz Felipe Valandro. (2020) Influence of shading technique on mechanical fatigue performance and optical properties of a 4Y-TZP ceramic for monolithic restorations. Journal of the Mechanical Behavior of Biomedical Materials 102, pages 103457.
Crossref
Funda Bayindir & Merve Koseoglu. (2020) The effect of restoration thickness and resin cement shade on the color and translucency of a high-translucency monolithic zirconia. The Journal of Prosthetic Dentistry 123:1, pages 149-154.
Crossref
Fernando Zarone, Maria Irene Di Mauro, Pietro Ausiello, Gennaro Ruggiero & Roberto Sorrentino. (2019) Current status on lithium disilicate and zirconia: a narrative review. BMC Oral Health 19:1.
Crossref
Andrea Savi, Aldo Crescini, Maddalena Manfredi, Andrea De Maria & Mario Bresciano. (2019) Agenesis of a maxillary lateral incisor associated with bilateral canine inclusions: A noninvasive multidisciplinary approach. Journal of Esthetic and Restorative Dentistry 31:6, pages 542-552.
Crossref
Zhiting Chen, Chaker Fares, Randy Elhassani, Fan Ren, Mijin Kim, Shu-Min Hsu, Arthur E. Clark & Josephine F. Esquivel‐Upshaw. (2019) Demonstration of SiO 2 /SiC‐based protective coating for dental ceramic prostheses . Journal of the American Ceramic Society 102:11, pages 6591-6599.
Crossref
Stephanie Francoi Poole, Gabriel Kalil Rocha Pereira, Izabela C.M. Moris, Artur Gaioto Marques, Ricardo Faria Ribeiro & Erica A. Gomes. (2019) Physical properties of conventional and monolithic yttria-zirconia materials after low-temperature degradation. Ceramics International 45:16, pages 21038-21043.
Crossref
D Longhini, COM Rocha, LT de Oliveira, NG Olenscki, EA Bonfante & GL Adabo. (2019) Mechanical Behavior of Ceramic Monolithic Systems With Different Thicknesses. Operative Dentistry 44:5, pages E244-E253.
Crossref
Maximiliane Amelie Schlenz, Alexander Schmidt, Peter Rehmann & Bernd Wöstmann. (2019) Fatigue damage of monolithic posterior computer aided designed/computer aided manufactured crowns. Journal of Prosthodontic Research 63:3, pages 368-373.
Crossref
Minh LE, Christel LARSSON & Evaggelia PAPIA. (2019) Bond strength between MDP-based cement and translucent zirconia. Dental Materials Journal 38:3, pages 480-489.
Crossref
Meral Kurt & Bilge Turhan Bal. (2019) Effects of accelerated artificial aging on the translucency and color stability of monolithic ceramics with different surface treatments. The Journal of Prosthetic Dentistry 121:4, pages 712.e1-712.e8.
Crossref
C. Monaco, A. Arena, J. Štelemėkaitė, E. Evangelisti & P. Baldissara. (2019) In vitro 3D and gravimetric analysis of removed tooth structure for complete and partial preparations. Journal of Prosthodontic Research 63:2, pages 173-178.
Crossref
Yutao Jian, Li Dao, Xiaodong Wang, Xinping Zhang, Michael V. Swain & Ke Zhao. (2019) Influence of veneer pore defects on fracture behavior of bilayered lithium disilicate glass-ceramic crowns. Dental Materials 35:4, pages e83-e95.
Crossref
Carlos Lopez‐Suarez, Celia Tobar, Maria Fernanda Sola‐Ruiz, Jesus Pelaez & Maria J. Suarez. (2019) Effect of Thermomechanical and Static Loading on the Load to Fracture of Metal‐Ceramic, Monolithic, and Veneered Zirconia Posterior Fixed Partial Dentures. Journal of Prosthodontics 28:2, pages 171-178.
Crossref
Anneli Skjold, Christian Schriwer & Marit Øilo. (2018) Effect of margin design on fracture load of zirconia crowns. European Journal of Oral Sciences 127:1, pages 89-96.
Crossref
Meelad Basil Findakly & Haider Hasan Jasim. (2019) Influence of preparation design on fracture resistance of different monolithic zirconia crowns: A comparative study. The Journal of Advanced Prosthodontics 11:6, pages 324.
Crossref
Manuela-Maria Manziuc, Cristina Gasparik, Marius Negucioiu, Mariana Constantiniuc, Alexandru Burde, Ioana Vlas & Diana Dudea. (2019) Optical properties of translucent zirconia: A review of the literature. The EuroBiotech Journal 3:1, pages 45-51.
Crossref
Tomotoshi Masuda, Syuntaro Nomoto, Toru Sato, Yuuhei Kanda, Takanori Sakai & Yu Tsuyuki. (2019) Effect of Differences in Axial Thickness and Type of Cement on Fracture Resistance in Composite Resin CAD/CAM Crowns. The Bulletin of Tokyo Dental College 60:1, pages 17-27.
Crossref
Minaz S. Pathan, Mohit G. Kheur, Anuya H. Patankar & Supriya M. Kheur. (2018) Assessment of Antagonist Enamel Wear and Clinical Performance of Full‐Contour Monolithic Zirconia Crowns: One‐Year Results of a Prospective Study. Journal of Prosthodontics 28:1.
Crossref
Tamer A. Hamza & Rana M. Sherif. (2017) Fracture Resistance of Monolithic Glass‐Ceramics Versus Bilayered Zirconia‐Based Restorations. Journal of Prosthodontics 28:1.
Crossref
Touraj Nejatian, Richard Holliday & Robert Wassell. 2019. Extra-Coronal Restorations. Extra-Coronal Restorations 163 205 .
Ioannis Konstantinidis, Dimitra Trikka, Spyridon Gasparatos & Miltiadis Mitsias. (2018) Clinical Outcomes of Monolithic Zirconia Crowns with CAD/CAM Technology. A 1-Year Follow-Up Prospective Clinical Study of 65 Patients. International Journal of Environmental Research and Public Health 15:11, pages 2523.
Crossref
Kiara Serafini Dapieve, Luís Felipe Guilardi, Tais Silvestri, Marília Pivetta Rippe, Gabriel Kalil Rocha Pereira & Luiz Felipe Valandro. (2018) Mechanical performance of Y-TZP monolithic ceramic after grinding and aging: Survival estimates and fatigue strength. Journal of the Mechanical Behavior of Biomedical Materials 87, pages 288-295.
Crossref
Keisuke Nakamura, Shuhei Ankyu, Fritjof Nilsson, Taro Kanno, Yoshimi Niwano, Per Vult von Steyern & Ulf Örtengren. (2018) Critical considerations on load-to-failure test for monolithic zirconia molar crowns. Journal of the Mechanical Behavior of Biomedical Materials 87, pages 180-189.
Crossref
Carolin Stöckl, Rüdiger Hampe, Bogna Stawarczyk, Miriam Haerst & Malgorzata Roos. (2018) Macro- and microtopographical examination and quantification of CAD-CAM composite resin 2- and 3-body wear. The Journal of Prosthetic Dentistry 120:4, pages 537-545.
Crossref
Shuhei Ankyu, Keisuke Nakamura, Akio Harada, Ryoichi Inagaki, Yusuke Katsuda, Taro Kanno, Yoshimi Niwano, Ulf Örtengren & Hiroshi Egusa. (2018) Influence of microscale expansion and contraction caused by thermal and mechanical fatigue on retentive strength of CAD/CAM-generated resin-based composite crowns. Journal of the Mechanical Behavior of Biomedical Materials 86, pages 89-97.
Crossref
Yu TSUYUKI, Toru SATO, Syuntaro NOMOTO, Mamoru YOTSUYA, Teruyoshi KOSHIHARA, Shinji TAKEMOTO & Masao YOSHINARI. (2018) Effect of occlusal groove on abutment, crown thickness, and cement-type on fracture load of monolithic zirconia crowns. Dental Materials Journal 37:5, pages 843-850.
Crossref
Yoo-Jin Chung, Ji-Man Park, Tae-Hyung Kim, Jin-Soo Ahn, Hyun-Suk Cha & Joo-Hee Lee. (2018) 3D Printing of Resin Material for Denture Artificial Teeth: Chipping and Indirect Tensile Fracture Resistance. Materials 11:10, pages 1798.
Crossref
F.A. Spitznagel, J. Boldt & P.C. Gierthmuehlen. (2018) CAD/CAM Ceramic Restorative Materials for Natural Teeth. Journal of Dental Research 97:10, pages 1082-1091.
Crossref
Ramtin Sadid-Zadeh, Adrian Farsaii, Athena Goodarzi & Elaine L. Davis. (2018) Loss of tooth structure associated with preparation for two monolithic CAD-CAM complete coverage restorations. The Journal of Prosthetic Dentistry 120:3, pages 403-408.
Crossref
Gabriel K.R. Pereira, Luís F. Guilardi, Kiara S. Dapieve, Cornelis J. Kleverlaan, Marília P. Rippe & Luiz Felipe Valandro. (2018) Mechanical reliability, fatigue strength and survival analysis of new polycrystalline translucent zirconia ceramics for monolithic restorations. Journal of the Mechanical Behavior of Biomedical Materials 85, pages 57-65.
Crossref
Farhad Tabatabaian, Ehsan Motamedi, Mahasti Sahabi, Hassan Torabzadeh & Mahshid Namdari. (2018) Effect of thickness of monolithic zirconia ceramic on final color. The Journal of Prosthetic Dentistry 120:2, pages 257-262.
Crossref
Rukiye DURKAN, Gonca DESTE & Hatice ŞİMŞEK. (2018) MONOBLOK ZİRKONYA SERAMİK SİSTEMİ İLE ESTETİK ANTERİOR KRONLAR: KLİNİK VAKA RAPORU. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 2017:2017.
Crossref
Rukiye DURKAN, Gdnca DESTE & Hatice ŞİMŞEK. (2018) MONOLİTİK ZİRKONYA SERAMİK SİSTEMLERİNİN ÜRETİM TİPLERİ İLE AŞINMA, OPTİK VE ESTETİK ÖZELLİKLERİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, pages 263-270.
Crossref
Noor Faeizah Amat, Andanastuti Muchtar, Muhammad Sufiyan Amril, Mariyam Jameelah Ghazali & Norziha Yahaya. (2018) Preparation of presintered zirconia blocks for dental restorations through colloidal dispersion and cold isostatic pressing. Ceramics International 44:6, pages 6409-6416.
Crossref
Rukiye DURKAN, Gonca DESTE & Hatice ŞİMŞEK. (2018) MONOLİTİK ZİRKONYA SERAMİK SİSTEMİ KULLANILARAK MİNİMAL İNVAZİV TEDAVİ YAKLAŞIMI: BİR OLGU NEDENİYLE. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, pages 71-75.
Crossref
Lucia K. Zaugg, Simon Meyer, Nadja Rohr, Isabella Zehnder & Nicola U. Zitzmann. (2018) Fracture behavior, marginal gap width, and marginal quality of vented or pre-cemented CAD/CAM all-ceramic crowns luted on Y-TZP implants. Clinical Oral Implants Research 29:2, pages 175-184.
Crossref
Aydan Boztuna ÇetindemirBülent ŞermetDeğer Öngül. (2018) The effect of light sources and CAD/CAM monolithic blocks on degree of conversion of cement. The Journal of Advanced Prosthodontics 10:4, pages 291.
Crossref
Paul WeiglAnna Sander, Yanyun WuRoland FelberHans-Christoph LauerMartin Rosentritt. (2018) In-vitro performance and fracture strength of thin monolithic zirconia crowns . The Journal of Advanced Prosthodontics 10:2, pages 79.
Crossref
Hiroto Gunge, Yoichiro Ogino, Masafumi Kihara, Yoshihiro Tsukiyama & Kiyoshi Koyano. (2018) Retrospective clinical evaluation of posterior monolithic zirconia restorations after 1 to 3.5 years of clinical service. Journal of Oral Science 60:1, pages 154-158.
Crossref
Reza Shahmiri, Owen Christopher Standard, Judy N. Hart & Charles Christopher Sorrell. (2018) Optical properties of zirconia ceramics for esthetic dental restorations: A systematic review. The Journal of Prosthetic Dentistry 119:1, pages 36-46.
Crossref
Ediz Kale, Burak Yilmaz, Emre Seker & Tuncer Burak Özcelik. (2017) Effect of fabrication stages and cementation on the marginal fit of CAD-CAM monolithic zirconia crowns. The Journal of Prosthetic Dentistry 118:6, pages 736-741.
Crossref
Rodrigo Diniz PRADO, Gabriel Kalil Rocha PEREIRA, Marco Antonio BOTTINO, Renata Marques de MELO & Luiz Felipe VALANDRO. (2017) Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia. Brazilian Oral Research 31:0.
Crossref
Camila Pauleski Zucuni, Luís Felipe Guilardi, Marilia Pivetta Rippe, Gabriel Kalil Rocha Pereira & Luiz Felipe Valandro. (2017) Fatigue strength of yttria-stabilized zirconia polycrystals: Effects of grinding, polishing, glazing, and heat treatment. Journal of the Mechanical Behavior of Biomedical Materials 75, pages 512-520.
Crossref
Manar Zaki Al Shobber & Thamer A. Alkhadra. (2017) Fracture resistance of different primary anterior esthetic crowns. The Saudi Dental Journal 29:4, pages 179-184.
Crossref
Brian D. Flinn, Ariel J. Raigrodski, Lloyd A. Mancl, Ryan Toivola & Tuesday Kuykendall. (2017) Influence of aging on flexural strength of translucent zirconia for monolithic restorations. The Journal of Prosthetic Dentistry 117:2, pages 303-309.
Crossref
Sulki ChoiHyung-In Yoon & Eun-Jin Park. (2017) Load-bearing capacity of various CAD/CAM monolithic molar crowns under recommended occlusal thickness and reduced occlusal thickness conditions. The Journal of Advanced Prosthodontics 9:6, pages 423.
Crossref
Moritz ZIMMERMANN, Gustav EGLI, Markus ZARUBA & Albert MEHL. (2017) Influence of material thickness on fractural strength of CAD/CAM fabricated ceramic crowns. Dental Materials Journal 36:6, pages 778-783.
Crossref
Mauricio Castellanos & Alex Delgado. 2017. The Dental Reference Manual. The Dental Reference Manual 115 128 .
Nadin Al-Haj Husain, Josette Camilleri & Mutlu Özcan. (2016) Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis. Journal of the Mechanical Behavior of Biomedical Materials 64, pages 104-112.
Crossref
Shuhei Ankyu, Keisuke Nakamura, Akio Harada, Guang Hong, Taro Kanno, Yoshimi Niwano, Ulf Örtengren & Hiroshi Egusa. (2016) Fatigue analysis of computer-aided design/computer-aided manufacturing resin-based composite vs. lithium disilicate glass-ceramic. European Journal of Oral Sciences 124:4, pages 387-395.
Crossref
Roberto Sorrentino, Clementina Triulzio, Maria Gabriella Tricarico, Giovanni Bonadeo, Enrico Felice Gherlone & Marco Ferrari. (2016) In vitro analysis of the fracture resistance of CAD–CAM monolithic zirconia molar crowns with different occlusal thickness. Journal of the Mechanical Behavior of Biomedical Materials 61, pages 328-333.
Crossref
Yu Zhang, Zhisong Mai, Amir Barani, Mark Bush & Brian Lawn. (2016) Fracture-resistant monolithic dental crowns. Dental Materials 32:3, pages 442-449.
Crossref
Per Vult von Steyern & Evaggelia Papia. (2016) Keramer och cementeringstekniker; en översikt. Aktuel Nordisk Odontologi 41:1, pages 210-227.
Crossref
Fatih Sari, Asli Secilmis, Irfan Simsek & Semih Ozsevik. (2016) Shear bond strength of indirect composite material to monolithic zirconia. The Journal of Advanced Prosthodontics 8:4, pages 267.
Crossref
Yoshiki ISHIDA & Taira MIYASAKA. (2016) Dimensional accuracy of dental casting patterns created by 3D printers. Dental Materials Journal 35:2, pages 250-256.
Crossref
K. Nakamura, A. Harada, M. Ono, H. Shibasaki, T. Kanno, Y. Niwano, E. Adolfsson, P. Milleding & U. Örtengren. (2016) Effect of low-temperature degradation on the mechanical and microstructural properties of tooth-colored 3Y-TZP ceramics. Journal of the Mechanical Behavior of Biomedical Materials 53, pages 301-311.
Crossref
Keisuke Nakamura, Yusuke Katsuda, Shuhei Ankyu, Akio Harada, Taichi Tenkumo, Taro Kanno, Yoshimi Niwano, Hiroshi Egusa, Percy Milleding & Ulf Örtengren. (2015) Cutting efficiency of diamond burs operated with electric high-speed dental handpiece on zirconia. European Journal of Oral Sciences 123:5, pages 375-380.
Crossref
Akio Harada, Keisuke Nakamura, Taro Kanno, Ryoichi Inagaki, Ulf Örtengren, Yoshimi Niwano, Keiichi Sasaki & Hiroshi Egusa. (2015) Fracture resistance of computer-aided design/computer-aided manufacturing-generated composite resin-based molar crowns. European Journal of Oral Sciences 123:2, pages 122-129.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.