Citations (53)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (12)
Dalia A. Gaber, Abdulrahman S. Alhuwaymili, Hessah S. Alhawas, Alhnouf A. Almutiri, Amal M. Alsubaiyel, Siham A. Abdoun & Reem A. Almutairi. (2022) Synthesized nano particles of glimepiride via spray freezing into cryogenic liquid: characterization, antidiabetic activity, and bioavailability. Drug Delivery 29:1, pages 364-373.
Read now
Read now
Dalia A Gaber. (2020) Nanoparticles of Lovastatin: Design, Optimization and in vivo Evaluation. International Journal of Nanomedicine 15, pages 4225-4236.
Read now
Read now
Ji-Jun Fu & Cheng-Cheng Liu. (2018) Tri-block polymer with interfacial layer formation ability and its use in maintaining supersaturated drug solution after dissolution of solid dispersions. International Journal of Nanomedicine 13, pages 1611-1619.
Read now
Read now
Yuanyuan Zhang, Yuxin Liu, Yanfei Luo, Qing Yao, Yue Zhong, Bin Tian & Xing Tang. (2016) Extruded Soluplus/SIM as an oral delivery system: characterization, interactions, in vitro and in vivo evaluations. Drug Delivery 23:6, pages 1902-1911.
Read now
Read now
Bart Claeys, Reinout Vandeputte, Bruno G. De Geest, Jean Paul Remon & Chris Vervaet. (2016) pH-independent immediate release polymethacrylate formulations – an observational study. Drug Development and Industrial Pharmacy 42:4, pages 578-583.
Read now
Read now
Elena Ravina-Eirin, J. L. Gomez-Amoza & Ramón Martínez-Pacheco. (2015) Drug dispersion degree and drug dissolution rate in Hybrane S1200-based instant-release matricial particles prepared by hot melt extrusion. Drug Development and Industrial Pharmacy 41:6, pages 1000-1005.
Read now
Read now
Yan Yang, Ye-min Wang, Jing Li & Wei-san Pan. (2014) Manufacture and characteristics of asymmetric membrane capsule shells with a novel wet phase inversion method. Drug Development and Industrial Pharmacy 40:12, pages 1704-1708.
Read now
Read now
Takatsune Yoshida, Ippei Kurimoto, Keiichi Yoshihara, Hiroyuki Umejima, Naoki Ito, Shunsuke Watanabe, Kazuhiro Sako & Akihiko Kikuchi. (2013) Effect of aminoalkyl methacrylate copolymer E/ HCl on in vivo absorption of poorly water-soluble drug. Drug Development and Industrial Pharmacy 39:11, pages 1698-1705.
Read now
Read now
Qunyou Tan, Li Zhang, Guodong Liu, Dan He, Huafeng Yin, Hong Wang, Jianyong Wu, Hong Liao & Jingqing Zhang. (2013) Novel taste-masked orally disintegrating tablets for a highly soluble drug with an extremely bitter taste: design rationale and evaluation. Drug Development and Industrial Pharmacy 39:9, pages 1364-1371.
Read now
Read now
Marc Hugo, Klaus Kunath & Jennifer Dressman. (2013) Selection of excipient, solvent and packaging to optimize the performance of spray-dried formulations: case example fenofibrate. Drug Development and Industrial Pharmacy 39:2, pages 402-412.
Read now
Read now
Min Yang, Peng Wang & Costas Gogos. (2013) Prediction of acetaminophen’s solubility in poly(ethylene oxide) at room temperature using the Flory–Huggins theory. Drug Development and Industrial Pharmacy 39:1, pages 102-108.
Read now
Read now
Michael A Repka, Sejal Shah, Jiannan Lu, Sindhuri Maddineni, Joe Morott, Ketaki Patwardhan & Noorullah Naqvi Mohammed. (2012) Melt extrusion: process to product. Expert Opinion on Drug Delivery 9:1, pages 105-125.
Read now
Read now
Articles from other publishers (41)
Nimra Munir, Ross McMorrow, Konrad Mulrennan, Darren Whitaker, Seán McLoone, Minna Kellomäki, Elina Talvitie, Inari Lyyra & Marion McAfee. (2023) Interpretable Machine Learning Methods for Monitoring Polymer Degradation in Extrusion of Polylactic Acid. Polymers 15:17, pages 3566.
Crossref
Crossref
Mori Dhaval, Shweta Sharma, Kiran Dudhat & Jayant Chavda. (2020) Twin-Screw Extruder in Pharmaceutical Industry: History, Working Principle, Applications, and Marketed Products: an In-depth Review. Journal of Pharmaceutical Innovation 17:2, pages 294-318.
Crossref
Crossref
Nazanin Nasrollahi, Leila Ghalamchi, Vahid Vatanpour, Alireza Khataee & Maryam Yousefpoor. (2022) Novel polymeric additives in the preparation and modification of polymeric membranes: A comprehensive review. Journal of Industrial and Engineering Chemistry 109, pages 100-124.
Crossref
Crossref
Harpreet Sandhu, Siva Ram Kiran Vaka, Dipen Desai, Paras Jariwala, Aruna Railkar, Wantanee Phuapradit & Navnit Shah. 2022. Oral Drug Delivery for Modified Release Formulations. Oral Drug Delivery for Modified Release Formulations
181
204
.
Wasfy M. Obeidat & Mohammad Ahmad Al-Natour. (2022) Assessment of Once Daily Controlled-release Ibuprofen Matrix Tablets
Prepared using Eudragit ®E100/Carbopol® 971P NF Polymers and their
Salt Combinations. Current Drug Delivery 19:1, pages 74-85.
Crossref
Crossref
Juliana dos Santos, Guilherme Silveira da Silva, Maiara Callegaro Velho & Ruy Carlos Ruver Beck. (2021) Eudragit®: A Versatile Family of Polymers for Hot Melt Extrusion and 3D Printing Processes in Pharmaceutics. Pharmaceutics 13:9, pages 1424.
Crossref
Crossref
Sonal V. Bhujbal, Biplob Mitra, Uday Jain, Yuchuan Gong, Anjali Agrawal, Shyam Karki, Lynne S. Taylor, Sumit Kumar & Qi (Tony) Zhou. (2021) Pharmaceutical amorphous solid dispersion: A review of manufacturing strategies. Acta Pharmaceutica Sinica B 11:8, pages 2505-2536.
Crossref
Crossref
Eline Boel, Piyush Panini & Guy Van den Mooter. (2020) Development of a Surface Coating Technique with Predictive Value for Bead Coating in the Manufacturing of Amorphous Solid Dispersions. Pharmaceutics 12:9, pages 878.
Crossref
Crossref
Ryusuke Takano, Reto Maurer, Laurence Jacob, Frank Stowasser, Cordula Stillhart & Susanne Page. (2019) Formulating Amorphous Solid Dispersions: Impact of Inorganic Salts on Drug Release from Tablets Containing Itraconazole-HPMC Extrudate. Molecular Pharmaceutics 17:8, pages 2768-2778.
Crossref
Crossref
Min-yan Wei, Xue-ping Lei, Jing-jing Fu, Ming-yue Chen, Jie-xia Li, Xi-yong Yu, Yin-lei Lin, Jing-ping Liu, Ling-ran Du, Xin Li, Yu Zhang, Ying-ling Miao, Yu-gang Huang, Lu Liang & Ji-jun Fu. (2020) The use of amphiphilic copolymer in the solid dispersion formulation of nimodipine to inhibit drug crystallization in the release media: Combining nano-drug delivery system with solid preparations. Materials Science and Engineering: C 111, pages 110836.
Crossref
Crossref
Saba Irshad, Ikram Ullah Khan, Syed Haroon Khalid, Sajid Asghar, Muhammad Irfan, Ikrima Khalid, Nadeem Sabir, Adnan Ali, Ahmad Nawaz Khan, Abid Mehmood Yousaf, Talib Hussain & Yasser Shahzad. (2019) Probing the effect of various lipids and polymer blends on clopidogrel encapsulated floating microcarriers. DARU Journal of Pharmaceutical Sciences 27:2, pages 571-582.
Crossref
Crossref
Zhisu Sun, Huicong Zhang, Huiyang He, Lingling Sun, Xiaorui Zhang, Qun Wang, Kexin Li & Zhonggui He. (2019) Cooperative effect of polyvinylpyrrolidone and HPMC E5 on dissolution and bioavailability of nimodipine solid dispersions and tablets. Asian Journal of Pharmaceutical Sciences 14:6, pages 668-676.
Crossref
Crossref
Tabassum Malik, Humaira Razzaq, Shumaila Razzaque, Hifza Nawaz, Asima Siddiqa, Mohammad Siddiq & Sara Qaisar. (2018) Design and synthesis of polymeric membranes using water-soluble pore formers: an overview. Polymer Bulletin 76:9, pages 4879-4901.
Crossref
Crossref
Xia Lin, Lili Su, Na Li, Yang Hu, Gang Tang, Lei Liu, Hongmei Li & Ziyi Yang. (2018) Understanding the mechanism of dissolution enhancement for poorly water-soluble drugs by solid dispersions containing Eudragit® E PO. Journal of Drug Delivery Science and Technology 48, pages 328-337.
Crossref
Crossref
Julien Maincent & Robert O. WilliamsIIIIII. (2018) Sustained-release amorphous solid dispersions. Drug Delivery and Translational Research 8:6, pages 1714-1725.
Crossref
Crossref
Rajendra Awasthi, Satish Manchanda, Poppy Das, Vinodhini Velu, Himaja Malipeddi, Kavita Pabreja, Terezinha D.J.A. Pinto, Gaurav Gupta & Kamal Dua. 2018. Engineering of Biomaterials for Drug Delivery Systems. Engineering of Biomaterials for Drug Delivery Systems
255
272
.
B. Démuth, A. Farkas, B. Szabó, A. Balogh, B. Nagy, E. Vágó, T. Vigh, A.P. Tinke, Z. Kazsu, Á. Demeter, J. Bertels, J. Mensch, A. Van Dijck, G. Verreck, I. Van Assche, G. Marosi & Z.K. Nagy. (2017) Development and tableting of directly compressible powder from electrospun nanofibrous amorphous solid dispersion. Advanced Powder Technology 28:6, pages 1554-1563.
Crossref
Crossref
Ryo Kinoshita, Tomoaki Ohta, Koji Shiraki, Kenjirou Higashi & Kunikazu Moribe. (2017) Effects of wet-granulation process parameters on the dissolution and physical stability of a solid dispersion. International Journal of Pharmaceutics 524:1-2, pages 304-311.
Crossref
Crossref
K. Wlodarski, L. Tajber & W. Sawicki. (2016) Physicochemical properties of direct compression tablets with spray dried and ball milled solid dispersions of tadalafil in PVP-VA. European Journal of Pharmaceutics and Biopharmaceutics 109, pages 14-23.
Crossref
Crossref
Harikrishna Erothu & Anitha C. Kumar. 2016. Biomedical Applications of Polymeric Materials and Composites. Biomedical Applications of Polymeric Materials and Composites
163
185
.
Muqdad Alhijjaj, Peter Belton & Sheng Qi. (2016) An investigation into the use of polymer blends to improve the printability of and regulate drug release from pharmaceutical solid dispersions prepared via fused deposition modeling (FDM) 3D printing. European Journal of Pharmaceutics and Biopharmaceutics 108, pages 111-125.
Crossref
Crossref
Balázs Démuth, Attila Farkas, Attila Balogh, Karolina Bartosiewicz, Barnabás Kállai-Szabó, Johny Bertels, Tamás Vigh, Jurgen Mensch, Geert Verreck, Ivo Van Assche, György Marosi & Zsombor K. Nagy. (2016) Lubricant-Induced Crystallization of Itraconazole From Tablets Made of Electrospun Amorphous Solid Dispersion. Journal of Pharmaceutical Sciences 105:9, pages 2982-2988.
Crossref
Crossref
Hadi Chahiyan Boroujeni & Farrokh Gharib. (2015) Thermodynamic study on solubility of deferiprone at different ionic strengths and various temperatures. Monatshefte für Chemie - Chemical Monthly 147:7, pages 1177-1181.
Crossref
Crossref
Abhishek Singh & Guy Van den Mooter. (2016) Spray drying formulation of amorphous solid dispersions. Advanced Drug Delivery Reviews 100, pages 27-50.
Crossref
Crossref
Wasfy M. Obeidat, Ali Nokhodchi & Hatim Alkhatib. (2015) Evaluation of Matrix Tablets Based on Eudragit®E100/Carbopol®971P Combinations for Controlled Release and Improved Compaction Properties of Water Soluble Model Drug Paracetamol. AAPS PharmSciTech 16:5, pages 1169-1179.
Crossref
Crossref
Esra’a Albarahmieh. (2015) An Investigation into the Relationship between Predicted Drug Miscibility and Product Stability for Hot Melt Extruded Systems: Ibuprofen Dispersions in Eudragit RS PO. MOJ Bioequivalence & Bioavailability 1:2.
Crossref
Crossref
Manoela Klüppel Riekes, Thiago Caon, José da SilvaJr.Jr., Regina Sordi, Gislaine Kuminek, Larissa Sakis Bernardi, Carlos Renato Rambo, Carlos Eduardo Maduro de Campos, Daniel Fernandes & Hellen Karine Stulzer. (2015) Enhanced hypotensive effect of nimodipine solid dispersions produced by supercritical CO2 drying. Powder Technology 278, pages 204-210.
Crossref
Crossref
Milica Stanković, Henderik W. Frijlink & Wouter L.J. Hinrichs. (2015) Polymeric formulations for drug release prepared by hot melt extrusion: application and characterization. Drug Discovery Today 20:7, pages 812-823.
Crossref
Crossref
B. Démuth, Z.K. Nagy, A. Balogh, T. Vigh, G. Marosi, G. Verreck, I. Van Assche & M.E. Brewster. (2015) Downstream processing of polymer-based amorphous solid dispersions to generate tablet formulations. International Journal of Pharmaceutics 486:1-2, pages 268-286.
Crossref
Crossref
Ketaki Patwardhan, Firouz Asgarzadeh, Thomas Dassinger, Jessica Albers & Michael A Repka. (2015) A quality by design approach to understand formulation and process variability in pharmaceutical melt extrusion processes. Journal of Pharmacy and Pharmacology 67:5, pages 673-684.
Crossref
Crossref
Sindhuri Maddineni, Sunil Kumar Battu, Joe Morott, Soumyajit Majumdar, S. N. Murthy & Michael A. Repka. (2014) Influence of Process and Formulation Parameters on Dissolution and Stability Characteristics of Kollidon® VA 64 Hot-Melt Extrudates. AAPS PharmSciTech 16:2, pages 444-454.
Crossref
Crossref
Marieke Pudlas, Samuel O. Kyeremateng, Leonardo A.M. Williams, James A. Kimber, Holger van Lishaut, Sergei G. Kazarian & Gerd H. Woehrle. (2015) Analyzing the impact of different excipients on drug release behavior in hot-melt extrusion formulations using FTIR spectroscopic imaging. European Journal of Pharmaceutical Sciences 67, pages 21-31.
Crossref
Crossref
Pankajkumar Yadav, Ekta Yadav, Amita Verma & Saima Amin. (2014) In vitro characterization and pharmacodynamic evaluation of furosemide loaded self nano emulsifying drug delivery systems (SNEDDS). Journal of Pharmaceutical Investigation 44:6, pages 443-453.
Crossref
Crossref
Pankajkumar S. Yadav, Ekta Yadav, Amita Verma & Saima Amin. (2014) Development, Characterization, and Pharmacodynamic Evaluation of Hydrochlorothiazide Loaded Self-Nanoemulsifying Drug Delivery Systems. The Scientific World Journal 2014, pages 1-10.
Crossref
Crossref
Xiaohong Liu, Shang Wang, Liqing Chai, Dong Zhang, Yinghua Sun, Lu Xu & Jin Sun. (2014) A two-step strategy to design high bioavailable controlled-release nimodipine tablets: The push–pull osmotic pump in combination with the micronization/solid dispersion techniques. International Journal of Pharmaceutics 461:1-2, pages 529-539.
Crossref
Crossref
Manoela Klüppel Riekes, Gislaine Kuminek, Gabriela Schneider Rauber, Carlos Eduardo Maduro de Campos, Adailton João Bortoluzzi & Hellen Karine Stulzer. (2014) HPMC as a potential enhancer of nimodipine biopharmaceutical properties via ball-milled solid dispersions. Carbohydrate Polymers 99, pages 474-482.
Crossref
Crossref
Susanne Page & Reto Maurer. 2014. Amorphous Solid Dispersions. Amorphous Solid Dispersions
395
417
.
Jia Liu, Feng Cao, Can Zhang & Qineng Ping. (2013) Use of polymer combinations in the preparation of solid dispersions of a thermally unstable drug by hot-melt extrusion. Acta Pharmaceutica Sinica B 3:4, pages 263-272.
Crossref
Crossref
Shu Li, David S. Jones & Gavin P. Andrews. 2013. Drug Delivery Strategies for Poorly Water‐Soluble Drugs. Drug Delivery Strategies for Poorly Water‐Soluble Drugs
325
358
.
Kathrin Nollenberger & Jessica Albers. 2012. Hot‐Melt Extrusion: Pharmaceutical Applications. Hot‐Melt Extrusion: Pharmaceutical Applications
113
144
.
Veeran Gowda Kadajji & Guru V. Betageri. (2011) Water Soluble Polymers for Pharmaceutical Applications. Polymers 3:4, pages 1972-2009.
Crossref
Crossref