Hot melt extrusion versus spray drying: hot melt extrusion degrades albendazole

Abstract

The purpose of this study was to enhance the dissolution properties of albendazole (ABZ) by the use of amorphous solid dispersions. Phase diagrams of ABZ–polymer binary mixtures generated from Flory–Huggins theory were used to assess miscibility and processability. Forced degradation studies showed that ABZ degraded upon exposure to hydrogen peroxide and 1 N NaOH at 80 °C for 5 min, and the degradants were albendazole sulfoxide (ABZSX), and ABZ impurity A, respectively. ABZ was chemically stable following exposure to 1 N HCl at 80 °C for one hour. Thermal degradation profiles show that ABZ, with and without Kollidon^® VA 64, degraded at 180 °C and 140 °C, respectively, which indicated that ABZ could likely be processed by thermal processing. Following hot melt extrusion, ABZ degraded up to 97.4%, while the amorphous ABZ solid dispersion was successfully prepared by spray drying. Spray-dried ABZ formulations using various types of acids (methanesulfonic acid, sulfuric acid and hydrochloric acid) and polymers (Kollidon^® VA 64, Soluplus^® and Eudragit^® E PO) were studied. The spray-dried ABZ with methanesulfonic acid and Kollidon^® VA 64 substantially improved non-sink dissolution in acidic media as compared to bulk ABZ (8-fold), physical mixture of ABZ:Kollidon^® VA 64 (5.6-fold) and ABZ mesylate salt (1.6-fold). No degradation was observed in the spray-dried product for up to six months and less than 5% after one-year storage. In conclusion, amorphous ABZ solid dispersions in combination with an acid and polymer can be prepared by spray drying to enhance dissolution and shelf-stability, whereas those made by melt extrusion are degraded.

Keywords:

• Albendazole
• degradation
• amorphous solid dispersions
• hot melt extrusion
• spray drying
• Flory–Huggins theory

Acknowledgements

Some of this work was presented at the AAPS Annual Meeting and Exposition in San Diego, CA, 2014 and in Orlando, FL, 2015. The authors would like to acknowledge Dr. Ian M Riddington and Jordan Dinser for their assistance on the LC/MS studies.

Disclosure statement

There is no conflict of interest.