Design, fabrication and metrological evaluation of wearable pressure sensors

Abstract

Pressure sensors are valuable transducers that are necessary in a huge number of medical application. However, the state of the art of compact and lightweight pressure sensors with the capability of measuring the contact pressure between two surfaces (contact pressure sensors) is very poor. In this work, several types of wearable contact pressure sensors are fabricated using different conductive textile materials and piezo-resistive films. The fabricated sensors differ in size, the textile conductor used and/or the number of layers of the sandwiched piezo-resistive film. The intention is to study, through the obtaining of their calibration curves, their metrological properties (repeatability, sensitivity and range) and determine which physical characteristics improve their ability for measuring contact pressures. It has been found that it is possible to obtain wearable contact pressure sensors through the proposed fabrication process with satisfactory repeatability, range and sensitivity; and that some of these properties can be improved by the physical characteristics of the sensors.

• Metrological properties
• pressure sensors
• wearability

Declaration of interest

This work has been financially supported by the ‘Secretaria de Ciencia y Técnica, Universidad Nacional de Tucumán, Tucumán, Argentina’ and by the ‘Consejo Nacional de Investigaciones Científicas y Técnicas, Argentina’.