76
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Comparative studies on convective heat transfer behaviour of nanofluids under turbulent flow with inserts

, , &
Pages 892-903 | Received 09 Jul 2022, Accepted 28 Nov 2022, Published online: 19 Dec 2022

References

  • Akbari, O. A., H. H. Afrouzi, A. Marzban, D. Toghraie, H. Malekzade, and A. Arabpour. 2017. “Investigation of Volume Fraction of Nanoparticles Effect and Aspect Ratio of the Twisted Tape in the Tube.” Journal of Thermal Analysis and Calorimetry 129 (6): 1911–1922. doi:10.1007/s10973-017-6372-7
  • Aly, Wael I. A. 2016. “Thermal and Hydrodynamic Performance of Aqueous CuO and Al2O3 Nanofluids in an Annular Coiled Tube Under Constant Wall Temperature and Laminar Flow Conditions.” Journal of Heat Transfer 138 (10): 102401–102411. doi:10.1115/1.4033613
  • Anbu, S., S. Venkatachalapathy, and S. Suresh. 2018. “Heat Transfer and Pressure Drop Studies of TiO2/DI Water Nanofluids in Helically Corrugated Tubes Using Spiraled Rod Inserts.” Heat and Mass Transfer 54 (5): 1301–1311. doi:10.1007/s00231-017-2230-1
  • Anbu, S., S. Venkatachalapathy, and S. Suresh. 2019. “Convective Heat Transfer Studies on Helically Corrugated Tubes with Spiraled Rod Inserts Using TiO2/DI Water Nanofluids.” Journal of Thermal Analysis and Calorimetry 137 (3): 849–864. doi:10.1007/s10973-019-08008-y
  • Arulprakasajothi, M., U. Chandrasekhar, K. Elangovan, and D. Yuvarajan. 2020. “Influence of Conical Strip Inserts in Heat Transfer Enhancement Under Transition Flow.” International Journal of Ambient Energy 41 (5): 511–516. doi:10.1080/01430750.2018.1472651
  • Bahuguna, Rahul, K. K. S. Mer, Manoj Kumar, and Sunil Chamoli. 2022. “Thermal Performance of a Circular Tube Embedded with TBVG Inserts: An Experimental Study.” Journal of Thermal Analysis and Calorimetry, doi:10.1007/s10973-022-11352-1.
  • Chamoli, Sunil, Xiaoru Zhuang, PawanKumar Pant, and Peng Yu. 2021. “Heat Transfer in a Turbulent Flow Tube Integrated with Tori as Vortex Generator Inserts.” Applied Thermal Engineering 194: 117062. doi:10.1016/j.applthermaleng.2021.117062
  • Chandrasekar, M., S. Suresh, and A. Chandra Bose. 2011. “Experimental Studies on Heat Transfer and Friction Factor Characteristic of Al2O3/Water Nanofluid in a Circular Pipe Under Transition Flow with Wire Coil Inserts.” Heat Transfer Engineering 32 (6): 485–496. doi:10.1080/01457632.2010.506358
  • Choi, S. 1995. “Enhancing Thermal Conductivity of Fuid with Nanoparticles”, Developments and Applications of Non-Newtonian Flows, ASME, New York, FED-231/MD 66: 99–105.
  • Dabri, E., F. Bahrami, and S. Mohammadzadeh. 2018. “Experimental Investigation on Turbulent Convection Heat Transfer of SiC/W and MgO/W Nanofluids in a Circular Tube Under Constant Heat Flux Boundary Condition.” Journal of Thermal Analysis and Calorimetry 131 (3): 2243–2259. doi:10.1007/s10973-017-6791-5
  • Dittus, F. W., and L. M. K. Boelter. 1930. “Heat Transfer in Automobile Radiators of the Tubular Type.” University of California Publications in Engineering 2: 443–461.
  • Eiamsa-ard, Smith, and Kunlanan Kiatkittipong. 2014. “Heat Transfer Enhancement by Multiple Twisted Tape Inserts and TiO2/Water Nanofluid.” Applied Thermal Engineering, doi:10.1016/j.applthermaleng.2014.05.062.
  • Eiamsa-ard, Smith, and Kunlanan Kiatkittipong. 2019. “Thermohydraulics of TiO2/Water Nanofluid in a Round Tube with Twisted Tape Inserts.” International Journal of Thermophysics 40 (28): 1–14.
  • Einstein, A. 1956. Investigation on the Theory of Brownian Motion. New York: Dover.
  • Ferrouillat, Sébastien, André Bontemps, João-Paulo Ribeiro, Jean-Antoine Gruss, and Olivier Soriano. 2011. “Hydraulic and Heat Transfer Study of SiO2/Water Nanofluids in Horizontal Tubes with Imposed Wall Temperature Boundary Conditions.” International Journal of Heat and Fluid Flow 32: 424–439. doi:10.1016/j.ijheatfluidflow.2011.01.003
  • Fotukian, S. M., and M. N. Esfahany. 2010. “Experimental Study of Turbulent Convective Heat Transfer and Pressure Drop of Dilute CuO/Water Nanofluid Inside a Circular Tube.” International Communications in Heat and Mass Transfer 37: 214. − 219. doi:10.1016/j.icheatmasstransfer.2009.10.003
  • Holman, J. P. 2001. Experimental Methods for Engineers. 7th edn. New York: McGraw-Hill.
  • Kanti, Praveen Kumar, K. V. Sharma, Alina Adriana Minea, and Vidyanad Kesti. 2021a. “Experimental and Computational Determination of Heat Transfer, Entropy Generation and Pressure Drop Under Turbulent Flow in a Tube with Fly Ash-Cu Hybrid Nanofluid.” International Journal of Thermal Sciences 167: 107016. doi:10.1016/j.ijthermalsci.2021.107016
  • Kanti, Praveen, K. V. Sharma, C. G. Ramachandra, and Munish Gupta. 2020. “Thermal Performance of Fly Ash Nanofluids at Various Inlet Fluid Temperatures: An Experimental Study.” International Communications in Heat and Mass Transfer 119: 103926.
  • Kanti, Praveen Kumar, K. V. Sharma, Zafar Said, and Munish Gupta. 2021b. “Experimental Investigation on Thermo-Hydraulic Performance of Water-Based Fly Ash–Cu Hybrid Nanofluid Flow in a Pipe at Various Inlet Fluid Temperatures.” International Communications in Heat and Mass Transfer 124: 105238. doi:10.1016/j.icheatmasstransfer.2021.105238
  • Kanti, Praveen, K. V. Sharma, Zafar Said, and Vidyanand Kesti. 2021c. “Entropy Generation and Friction Factor Analysis of Fly Ash Nanofluids Flowing in a Horizontal Tube: Experimental and Numerical Study.” International Journal of Thermal Sciences 166: 106972. doi:10.1016/j.ijthermalsci.2021.106972
  • Kayhani, M. H., H. Soltanzadeh, M. M. Hayat, M. Nazari, and M. Kowsary M. 2012. “Experimental Study of Convective Heat Transfer and Pressure Drop of TiO2/Water Nanofluid.” International Communications in Heat and Mass Transfer 39: 456–462. doi:10.1016/j.icheatmasstransfer.2012.01.004
  • Maxwell, J. C. 1954. Treaties on Electricity and Magnetism. New York: Dover.
  • Mohammadiun, Mohammad, Forough Dashtestani, and Mostafa Alizadeh. 2016. “Exergy Prediction Model of a Double Pipe Heat Exchanger Using Metal Oxide Nanofluids and Twisted Tape Based on the Artificial Neural Network Approach and Experimental Results.” Journal of Heat Transfer 138 (1): 011801–011810. doi:10.1115/1.4031073
  • Mukesh Kumar, P. C., K. Palanisamy, J. Kumar, R. Tamilarasan, and S. Senthilnadhan. 2015. “CFD Analysis of Heat Transfer and Pressure Drop in Helically Coiled Heat Exchangers Using Al2O3 / Water Nanofluid.” Journal of Mechanical Science and Technology 29: 697–705. doi:10.1007/s12206-015-0129-7
  • Mukhrrjee, Sayantan, Smita Rani Panda, Purna Chandra Mishra, and Paritosh Chaudhuri. 2020. “Enhancing Thermophysical Characteristics and Heat Transfer Potential of TiO2/ Water Nanofluid.” International Journal of Thermophysics 41 (162): 1–33.
  • Naik, M. T., Syed Sha Fahad, L. Syam Sundar, and Manoj K. Singh. 2014. “Comparative Study on Thermal Performance of Twisted Tape and Wire Coil Inserts in Turbulent Flow Using CuO/Water Nanofluid.” Experimental Thermal and Fluid Science, doi:10.1016/j.expthermflusci.2014.04.006.
  • Pak, B. C., and Y. Cho. 1998. “Hydrodynamic and Heat Transfer Study of Dispersed Fluids with Submicron Metallic Oxide Particle.” Experimental Heat Transfer 11 (2): 151–170. doi:10.1080/08916159808946559
  • Pimsarn, M., P. Samruaisin, C. Thianpong, K. Ruengpayungsak, P. Eiamsa-ard, S. Chamoli, and S. Eiamsa-ard. 2022. “Performance of a Heat Exchanger with Compound Inclined Circular-Rings and Twisted Tapes.” Case Studies in Thermal Engineering 37: 102285. doi:10.1016/j.csite.2022.102285
  • Rathnakumar, P., S. M. Iqbal, J. J. Michael, and S. Suresh. 2018. “Study on Performance Enhancement Factors in Turbulent Flow of CNT/Water Nanofluid Through a Tube Fitted with Helical Screw Louvered rod Inserts.” Chemical Engineering and Processing - Process Intensification 127: 103–110. doi:10.1016/j.cep.2018.03.027
  • Rupesh, J. Yadav, Tejas Mahajani, S. Kore Sandeep, M. Gadhe Prakash, and A. Kamble Dhanpal. 2021. “Investigation of Heat Transfer Characteristics Using Fe3O4 Nanofluid Along with TT Inserts in Tube with Uniform Electromagnetic Field.” Applied Nanoscience, doi:10.1007/s13204-021-01905-5.
  • Saeedinia, M., M. A. Akhavan–Behabadi, and M. Nasr. 2012. “Experimental Study on Heat Transfer and Pressure Drop of Nanofluid Flow in a Horizontal Coiled Wire Inserted Tube Under Constant Heat Flux.” Experimental Thermal and Fluid Science 36: 158–168. doi:10.1016/j.expthermflusci.2011.09.009
  • Sajadi, A. R., and M. H. Kazemi. 2011. “Investigation of Turbulent Convective Heat Transfer and Pressure Drop of TiO2/Water Nanofluid in Circular Tube.” International Communications in Heat and Mass Transfer 38: 1474–1478. doi:10.1016/j.icheatmasstransfer.2011.07.007
  • Salimpour, Mohammad Reza, and Amir Dehshiri–Parizi. 2015. “Convective Heat Transfer of Nanofluid Flow Through Conduits with Different Cross-Sectional Shapes.” Journal of Mechanical Science and Technology 29: 707–713. doi:10.1007/s12206-015-0130-1
  • Selvam, C., D. Mohan Lal, and Sivasankaran Harish. 2018. “Convective Heat Transfer Behaviour of Water-Ethylene Glycol-Mixture with Silver Nanoparticles Under Laminar Flow Conditions.” Journal of Mechanical Science and Technology 32: 2191–2199. doi:10.1007/s12206-018-0429-9
  • Sundar, L. S., N. T. Ravi Kumar, M. T. Naik, and K. V. Sharma. 2012. “Effect of Full Length Twisted Tape Inserts on Heat Transfer and Friction Factor Enhancement with Fe3O4 Magnetic Nanofluid Inside a Plain Tube: An Experimental Study.” International Journal of Heat and Mass Transfer 55: 2761–2768. doi:10.1016/j.ijheatmasstransfer.2012.02.040
  • Sundar, L. S., and K. V. Sharma. 2010a. “Heat Transfer Enhancements of Low Volume Concentration Al2O3 Nanofluid and with Longitudinal Strip Inserts in a Circular Tube.” International Journal of Heat and Mass Transfer 53 (53): 4280–4286. doi:10.1016/j.ijheatmasstransfer.2010.05.056
  • Sundar, L. S., and K. V. Sharma. 2010b. “Turbulent Heat Transfer and Friction Factor of Al2O3 Nanofluid in Circular Tube with Twisted Tape Inserts.” International Journal of Heat and Mass Transfer 53: 1409–1416. doi:10.1016/j.ijheatmasstransfer.2009.12.016
  • Suresh, S., P. Selvakumar, M. Chandrasekar, and V. Srinivasa Raman. 2012. “Experimental Studies on Heat Transfer and Friction Factor Characteristics of Al2O3/Water Nanofluid Under Turbulent Flow with Spiraled Rod Inserts.” Chemical Engineering and Processing: Process Intensification 53: 24–30. doi:10.1016/j.cep.2011.12.013
  • Suresh, S., K. P. Venkitaraj, and P. Selvakumar. 2011. “Comparative Study on Thermal Performance of Helical Screw Tape Inserts in Laminar Flow Using Al2O3/Water and CuO/Water Nanofluids.” Superlattices and Microstructures 49: 608–622. doi:10.1016/j.spmi.2011.03.012
  • Todkar, R. N., Kishor B. Waghulde, and M. M. Patil. 2022. “Experimental Approach to Investigate Heat Transfer Enhancement Using Nanofluids with Jet Impingement.” International Journal of Ambient Energy 2022: 1–14.
  • Xuan, Y., and W. Roetzel. 2000. “Conceptions for Heat Transfer Correlation of Nanofluids.” International Journal of Heat and Mass Transfer 43: 3701–3707. doi:10.1016/S0017-9310(99)00369-5
  • Zainon, S. M. N., and W. H. Azmi. 2021. “Heat Transfer Performance of Green Bioglycol-Based TiO2–SiO2 Nanofluids.” Journal of Heat Transfer 143 (11): 112501–112510. doi:10.1115/1.4051763

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.