80
Views
1
CrossRef citations to date
0
Altmetric
Research Article

Performance analysis of diesel engine using Madhuca longifolia blended biodiesel with nano-additive for variable parameters

&
Pages 1214-1231 | Received 15 Mar 2022, Accepted 17 Jan 2023, Published online: 30 Jan 2023

References

  • Adaileh, W. M., and K. S. Alqdah. 2012. “Performance of Diesel Engine Fuelled by a Biodiesel Extracted from a Waste Cocking Oil.” Energy Procedia 18: 1317–1334. doi:10.1016/j.egypro.2012.05.149.
  • Akkoli, K. M., N. R. Banapurmath, M. M. Shivashimpi, M. E. M. Soudagar, I. A. Badruddin, M. A. Alazwari, V. S. Yaliwal, et al. 2021. “Effect of Injection Parameters and Producer Gas Derived from Redgram Stalk on the Performance and Emission Characteristics of a Diesel Engine.” Alexandria Engineering Journal 60 (3): 3133–3142. doi:10.1016/j.aej.2021.01.047.
  • Al-Hartomy, O. A., M. A. Mujtaba, A. Al-Ghamdi, J. Iqbal, and S. Wageh. 2022. “Combined Effect of Phoenix Dactylifera Biodiesel and Multiwalled Carbon Nanotube–Titanium Dioxide Nanoparticles for Modified Diesel Engines.” International Journal of Environmental Science and Technology 19: 515–540. doi:10.1007/s13762-021-03152-1.
  • Ashraful, A. M., H. H. Masjuki, M. A. Kalam, I. R. Fattah, S. Imtenan, S. A. Shahir, and H. M. Mobarak. 2014. “Production and Comparison of Fuel Properties, Engine Performance, and Emission Characteristics of Biodiesel from Various Non-Edible Vegetable Oils: A Review.” Energy Conversion and Management 80: 202–228. doi:10.1016/j.enconman.2014.01.037.
  • Awang, M. S. N., N. W. M. Zulkifli, A. Kalam, M. M. Abbas, M. H. Ahmad, S. A. Zulkifli, M. N. A. M. Yusoff, W. M. A. W. Daud, N. S. S. Ambarwati, and R. F. Abdullah. 2021. “Carbon Nanotube as Effective Enhancer for Performance and Emission of Diesel Engine Fueled with Waste Plastic Pyrolytic Oildiesel Blend and its Combination with Titanium Oxide Nanoparticle.” Jurnal Tribologi 31: 97–114.
  • Bidir, M. G., N. K. Millerjothi, M. S. Adaramola, and F. Y. Hagos. 2021. “The Role of Nanoparticles on Biofuel Production and as an Additive in Ternary Blend Fuelled Diesel Engine: A Review.” Energy Reports 7: 3614–3627. doi:10.1016/j.egyr.2021.05.084.
  • Bora, B. J., and U. K. Saha. 2016. “Optimisation of Injection Timing and Compression Ratio of a raw Biogas Powered Dual Fuel Diesel Engine.” Applied Thermal Engineering 92: 111–121. doi:10.1016/j.applthermaleng.2015.08.111.
  • Celik, M. B., and D. Simsek. 2014. “The Determination of Optimum Injection Pressure in an Engine Fuelled with Soybean Biodiesel/Diesel Blend.” Thermal Science 18 (1): 229–238. doi:10.2298/TSCI120807023C.
  • Chandrasekaran, V., M. Arthanarisamy, P. Nachiappan, S. Dhanakotti, and B. Moorthy. 2016. “The Role of Nano Additives for Biodiesel and Diesel Blended Transportation Fuels.” Transportation Research Part D: Transport and Environment 46: 145–156. doi:10.1016/j.trd.2016.03.015.
  • De, B., and R. S. Panua. 2014. “An Experimental Study on Performance and Emission Characteristics of Vegetable Oil Blends with Diesel in a Direct Injection Variable Compression Ignition Engine.” Procedia Engineering 90: 431–438. doi:10.1016/j.proeng.2014.11.873.
  • Debnath, B. K., N. Sahoo, and U. K. Saha. 2013. “Adjusting the Operating Characteristics to Improve the Performance of an Emulsified Palm Oil Methyl Ester Run Diesel Engine.” Energy Conversion and Management 69: 191–198. doi:10.1016/j.enconman.2013.01.031.
  • Ganapathy, T., R. P. Gakkhar, and K. Murugesan. 2011. “Influence of Injection Timing on Performance, Combustion and Emission Characteristics of Jatropha Biodiesel Engine.” Applied Energy 88 (12): 4376–4386. doi:10.1016/j.apenergy.2011.05.016.
  • Garzón, N. A. N., A. A. M. Oliveira, R. M. Hartmann, and E. Bazzo. 2015. “Experimental and Thermodynamic Analysis of a Compression Ignition Engine Operating with Straight Soybean oil.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 37: 1467–1478. doi:10.1007/s40430-014-0287-z.
  • Gavhane, S., R. A. M. Kate, A. Pawar, M. R. Safaei, M. E. M. Soudagar, M. Mujtaba Abbas, H. Muhammad Ali, et al. 2020. “Effect of Zinc Oxide Nano-Additives and Soybean Biodiesel at Varying Loads and Compression Ratios on VCR Diesel Engine Characteristics.” Symmetry 12 (6): 1042. doi:10.3390/sym12061042.
  • Ghanbari, M., L. M. Vanani, M. D. Soufi, and A. Jahanbakhshi. 2021. “Effect of alumina Nanoparticles as Additive with Diesel–Biodiesel Blends on Performance and Emission Characteristic of a six-Cylinder Diesel Engine Using Response Surface Methodology (RSM).” Energy Conversion and Management: X 11: 100091. doi:10.1016/j.ecmx.2021.100091.
  • Gharehghani, A., M. Mirsalim, and R. Hosseini. 2017. “Effects of Waste Fish oil Biodiesel on Diesel Engine Combustion Characteristics and Emission.” Renewable Energy 101: 930–936. doi:10.1016/j.renene.2016.09.045.
  • Habibullah, M., H. H. Masjuki, M. A. Kalam, I. M. R. Fattah, A. M. Ashraful, and H. M. Mobarak. 2014. “Biodiesel Production and Performance Evaluation of Coconut, Palm and Their Combined Blend with Diesel in a Single-Cylinder Diesel Engine.” Energy Conversion and Management 87: 250–257. doi:10.1016/j.enconman.2014.07.006.
  • Harari, P. A., N. R. Banapurmath, V. S. Yaliwal, M. E. M. Soudagar, T. Y. Khan, M. A. Mujtaba, M. R. Safaei, et al. 2021. “Experimental Investigation on Compression Ignition Engine Powered with Pentanol and Thevetia Peruviana Methyl Ester Under Reactivity Controlled Compression Ignition Mode of Operation.” Case Studies in Thermal Engineering 25: 100921. doi:10.1016/j.csite.2021.100921.
  • Hoseini, S. S., G. Najafi, B. Ghobadian, M. T. Ebadi, R. Mamat, and T. Yusaf. 2020. “Performance and Emission Characteristics of a CI Engine Using Graphene Oxide (GO) Nano-Particles Additives in Biodiesel-Diesel Blends.” Renewable Energy 145: 458–465. doi:10.1016/j.renene.2019.06.006.
  • Javed, S., Y. V. V. S. Murthy, M. R. S. Satyanarayana, R. R. Reddy, and K. Rajagopal. 2016. “Effect of a Zinc Oxide Nanoparticle Fuel Additive on the Emission Reduction of a Hydrogen Dual-Fuelled Engine with Jatropha Methyl Ester Biodiesel Blends.” Journal of Cleaner Production 137: 490–506. doi:10.1016/j.jclepro.2016.07.125.
  • Jha, G., P. Singh, Y. Parikh, and R. Sekhar. 2015. “Effect of Injection Timing on the Performance and Emissions of Biodiesel Fuelled Diesel Engine.” Journal of Chemical and Pharmaceutical Research 7 (2): 365–369.
  • Kannan, T. K., and M. R. Gounder. 2011. “Thevetia Peruviana Biodiesel Emulsion Used as a Fuel in a Single Cylinder Diesel Engine Reduces NOx and Smoke.” Thermal Science 15 (4): 1185–1191. doi:10.2298/TSCI100810045K.
  • Kasiraman, G., V. E. Geo, and B. Nagalingam. 2016. “Assessment of Cashew nut Shell Oil as an Alternate Fuel for CI (Compression Ignition) Engines.” Energy 101 (C): 402–410. doi:10.1016/j.energy.2016.01.086.
  • Kumar, A. R. P., K. A. Annamalai, and P. P. K. Kumar. 2013. “Experimental Investigation on Emission Parameters of Transesterified Adelfa oil (Methyl Ester of Nerium Oil).” International Journal of ChemTech Research 5 (4): 1664–1670.
  • Kumar, N., and H. Raheman. 2022. “Production, Characterization and Utilization of Second Generation Biodiesel Blend in Diesel Engine Using Water and Nanoparticles as Additives.” Fuel 308: 122063. doi:10.1016/j.fuel.2021.122063.
  • Lam, M. K., K. T. Lee, and A. R. Mohamed. 2010. “Homogeneous, Heterogeneous and Enzymatic Catalysis for Transesterification of High Free Fatty Acid oil (Waste Cooking oil) to Biodiesel: A Review.” Biotechnology Advances 28 (4): 500–518. doi:10.1016/j.biotechadv.2010.03.002.
  • Lenin, M. A., M. R. Swaminathan, and G. Kumaresan. 2013. “Performance and Emission Characteristics of a DI Diesel Engine with a Nanofuel Additive.” Fuel 109: 362–365. doi:10.1016/j.fuel.2013.03.042.
  • Mohsin, R., Z. A. Majid, A. H. Shihnan, N. S. Nasri, and Z. Sharer. 2014. “Effect of Biodiesel Blends on Engine Performance and Exhaust Emission for Diesel Dual Fuel Engine.” Energy Conversion and Management 88: 821–828. doi:10.1016/j.enconman.2014.09.027.
  • Mujtaba, M. A., H. M. Cho, H. H. Masjuki, M. A. Kalam, M. Farooq, M. E. M. Soudagar, M. Gul, et al. 2021. “Effect of Primary and Secondary Alcohols as Oxygenated Additives on the Performance and Emission Characteristics of Diesel Engine.” Energy Reports 7: 1116–1124. doi:10.1016/j.egyr.2020.12.008.
  • Mujtaba, M. A., H. H. Masjuki, M. A. Kalam, F. Noor, M. Farooq, H. C. Ong, M. Gul, et al. 2020a. “Effect of Additivized Biodiesel Blends on Diesel Engine Performance, Emission, Tribological Characteristics, and Lubricant Tribology.” Energies 13 (13): 3375. doi:10.3390/en13133375.
  • Mujtaba, M. A., H. H. Masjuki, M. A. Kalam, H. C. Ong, M. Gul, M. Farooq, M. E. M. Soudagar, W. Ahmed, M. H. Harith, and M. N. A. M. Yusoff. 2020b. “Comparative Study of Nanoparticles and Alcoholic Fuel Additives-Biodiesel-Diesel Blend for Performance and Emission Improvements.” Fuel 279: 118434. doi:10.1016/j.fuel.2020.118434.
  • Panwar, N. L., H. Y. Shrirame, N. S. Rathore, S. Jindal, and A. K. Kurchania. 2010. “Performance Evaluation of a Diesel Engine Fueled with Methyl Ester of Castor Seed oil.” Applied Thermal Engineering 30 (2): 245–249. doi:10.1016/j.applthermaleng.2009.07.007.
  • Paul, G., A. Datta, and B. K. Mandal. 2014. “An Experimental and Numerical Investigation of the Performance, Combustion and Emission Characteristics of a Diesel Engine Fueled with Jatropha Biodiesel.” Energy Procedia 54: 455–467. doi:10.1016/j.egypro.2014.07.288.
  • Perumal, V., and M. Ilangkumaran. 2018. “The Influence of Copper Oxide Nano Particle Added Pongamia Methyl Ester Biodiesel on the Performance, Combustion and Emission of a Diesel Engine.” Fuel 232: 791–802. doi:10.1016/j.fuel.2018.04.129.
  • Prabu, A., and R. B. Anand. 2016. “Emission Control Strategy by Adding Alumina and Cerium Oxide Nano Particle in Biodiesel.” Journal of the Energy Institute 89 (3): 366–372. doi:10.1016/j.joei.2015.03.003.
  • Prasad, K. B., O. Meduri, V. D. Raju, A. K. Azmeera, V. Harish, L. Subramani, and M. E. M. Soudagar. 2020. “Effect of Split Fuel Injection Strategies on the Diverse Characteristics of CRDI Diesel Engine Operated with Tamarind Biodiesel.” Energy Sources A: Recovery Utilization, and Environmental Effects 1–9. doi:10.1080/15567036.2020.1856973.
  • Roy, M. M., W. Wang, and J. Bujold. 2013. “Biodiesel Production and Comparison of Emissions of a DI Diesel Engine Fueled by Biodiesel-Diesel and Canola oil-Diesel Blends at High Idling Operations.” Applied Energy 106: 198–208. doi:10.1016/j.apenergy.2013.01.057.
  • Sadeghinezhad, E., S. N. Kazi, F. Sadeghinejad, A. Badarudin, M. Mehrali, R. Sadri, and M. R. Safaei. 2014. “A Comprehensive Literature Review of Bio-Fuel Performance in Internal Combustion Engine and Relevant Costs Involvement.” Renewable and Sustainable Energy Reviews 30: 29–44. doi:10.1016/j.rser.2013.09.022.
  • Sanjay, K. C., P. V. Shreyas, S. S. Gafoor, T. Biju, and K. Raju. 2016. “Effect of Alumina Nanoparticles on the Performance and Emission Characteristics of CI Engine Fuelled with Lard oil Methyl Ester Blends.” American Journal of Material Science 6 (4A): 94–98. doi:10.5923/c.materials.201601.18.
  • Sarkar, J., P. Ghosh, and A. Adil. 2015. “A Review on Hybrid Nanofluids: Recent Research, Development and Applications.” Renewable and Sustainable Energy Reviews 43: 164–177. doi:10.1016/j.rser.2014.11.023.
  • Sateesh, K. A., V. S. Yaliwal, M. E. M. Soudagar, N. R. Banapurmath, H. Fayaz, M. R. Safaei, A. Elfasakhany, and A. I. EL-Seesy. 2022. “Utilization of Biodiesel/Al2O3 Nanoparticles for Combustion Behavior Enhancement of a Diesel Engine Operated on Dual Fuel Mode.” Journal of Thermal Analysis and Calorimetry 147: 5897–5911. doi:10.1007/s10973-021-10928-7.
  • Satputaley, S. S., D. B. Zodpe, and N. V. Deshpande. 2017. “Performance, Combustion and Emission Study on CI Engine Using Microalgae oil and Microalgae oil Methyl Esters.” Journal of the Energy Institute 90 (4): 513–521. doi:10.1016/j.joei.2016.05.011.
  • Senthil, R., R. Silambarasan, and N. Ravichandiran. 2015. “Influence of Injection Timing and Compression Ratio on Performance, Emission and Combustion Characteristics of Annona Methyl Ester Operated Diesel Engine.” Alexandria Engineering Journal 54 (3): 295–302. doi:10.1016/j.aej.2015.05.008.
  • Senthur, N. S., T. S. Ravikumar, and C. B. John. 2014. “Eucalyptus Biodiesel; an Environmental Friendly Fuel for Compression Ignition Engines.” American Journal of Engineering Research 3: 144–149.
  • Soudagar, M. E. M., A. Afzal, M. R. Safaei, A. M. Manokar, A. I. EL-Seesy, M. A. Mujtaba, O. D. Samuel, et al. 2022. “Investigation on the Effect of Cottonseed oil Blended with Different Percentages of Octanol and Suspended MWCNT Nanoparticles on Diesel Engine Characteristics.” Journal of Thermal Analysis and Calorimetry 147: 525–542. doi:10.1007/s10973-020-10293-x.
  • Soudagar, M.E.M., Khan, H.M., Khan, T.Y., Razzaq, L., Asif, T., Mujtaba, M.A., Hussain, A., Farooq, M., Ahmed, W., Shahapurkar, K. and Alwi, A. 2021a. “Experimental Analysis of Engine Performance and Exhaust Pollutant on a Single-Cylinder Diesel Engine Operated Using Moringa Oleifera Biodiesel.” Applied Sciences 11 (15): 7071. doi:10.3390/app11157071.
  • Soudagar, M. E. M., M. A. Mujtaba, M. R. Safaei, A. Afzal, W. Ahmed, N. R. Banapurmath, N. Hossain, et al. 2021b. “Effect of Sr@ZnO Nanoparticles and Ricinus Communis Biodiesel-Diesel Fuel Blends on Modified CRDI Diesel Engine Characteristics.” Energy 215: 119094. doi:10.1016/j.energy.2020.119094.
  • Swamy, L. R., N. R. Banapurmath, T. K. Chandrashekar, M. E. M. Soudagar, M. Gul, N. N. N. Ghazali, M. A. Mujtaba, et al. 2021. “Effect of Injection Timing and Duration on the Performance of Diesel Engine Fueled with Port Injection of Oxygenated Fuels.” Chemical Engineering Communications, doi: 10.1080/00986445.2021.2013211.
  • Tüccar, G., and K. Aydin. 2013. “Evaluation of Methyl Ester of Microalgae Oil as Fuel in a Diesel Engine.” Fuel 112: 203–207. doi:10.1016/j.fuel.2013.05.016.
  • Venu, H., and V. Madhavan. 2016. “Effect of Al2 O3 Nanoparticles in Biodiesel-Diesel-Ethanol Blends at Various Injection Strategies: Performance, Combustion and Emission Characteristics.” Fuel 186: 176–189. doi:10.1016/j.fuel.2016.08.046.
  • Vijayaraj, K., and A. P. Sathiyagnanam. 2016. “Experimental Investigation of a Diesel Engine with Methyl Ester of Mango Seed oil and Diesel Blends.” Alexandria Engineering Journal 55 (1): 215–221. doi:10.1016/j.aej.2015.12.001.
  • Wategave, S. P., N. R. Banapurmath, M. S. Sawant, M. E. M. Soudagar, M. A. Mujtaba, A. Afzal, J. S. Basha, et al. 2021. “Clean Combustion and Emissions Strategy Using Reactivity Controlled Compression Ignition (RCCI) Mode Engine Powered with CNG-Karanja Biodiesel.” Journal of the Taiwan Institute of Chemical Engineers 124: 116–131. doi:10.1016/j.jtice.2021.04.055.
  • Yadav, S. P. R., C. G. Saravanan, and M. Kannan. 2015. “Influence of Injection Timing on DI Diesel Engine Characteristics Fueled with Waste Transformer oil.” Alexandria Engineering Journal 54 (4): 881–888. doi:10.1016/j.aej.2015.07.008.
  • Yusuf, A. A., H. Dandakouta, I. Yahuza, D. A. Yusuf, M. A. Mujtaba, A. S. El-Shafay, and M. E. M. Soudagar. 2022. “Effect of low CeO2 Nanoparticles Dosage in Biodiesel-Blends on Combustion Parameters and Toxic Pollutants from Common-Rail Diesel Engine.” Atmospheric Pollution Research 13 (2): 101305. doi:10.1016/j.apr.2021.101305.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.