Investigation of tribological performance of non-edible biodiesel under different load and temperature

References

• Ashok, Athmakuri, Santhosh Kumar Gugulothu, Ragireddy Venkat Reddy, Ali Etem Gurel, and Balakrishnan Deepanraj. 2022. “Prediction-Optimization of the Influence of 1-Pentanol/Jatropha Oil Blends on RCCI Engine Characteristics Using Multi-Objective Response Surface Methodology.” Renewable Energy Focus 42 (September): 8–23. https://doi.org/10.1016/j.ref.2022.05.006.
   Google Scholar
• Ashok, B., K. Nanthagopal, Sivaprasad Darla, Ong Hwai Chyuan, A. Ramesh, Ashwin Jacob, G. Sahil, S. Thiyagarajan, and V. Edwin Geo. 2019. “Comparative Assessment of Hexanol and Decanol as Oxygenated Additives with Calophyllum Inophyllum Biodiesel.” Energy 173: 494–510. https://doi.org/10.1016/j.energy.2019.02.077.
   Web of Science ®Google Scholar
• Barnwal, B. K., and M. P. Sharma. 2005. “Prospects of Biodiesel Production from Vegetable Oils in India.” Renewable and Sustainable Energy Reviews 9 (4): 363–378. https://doi.org/10.1016/j.rser.2004.05.007.
   Web of Science ®Google Scholar
• Bhushan, B., and Ko Pak Lim. 2003. “Introduction to Tribology.” Applied Mechanics Reviews 56 (1): B6–B7. https://doi.org/10.1115/1.1523360.
   Google Scholar
• Cooper, D. 1995. “Laboratory Screening Tests for Low Sulphur Diesel Fuel Lubricity.” Lubrication Science 7 (2): 133–148. https://doi.org/10.1002/ls.3010070203.
   Google Scholar
• Ellappan, Sivakumar, and Silambarasan Rajendran. 2021. “A Comparative Review of Performance and Emission Characteristics of Diesel Engine Using Eucalyptus-Biodiesel Blend.” Fuel 284 (January): 118925. https://doi.org/10.1016/j.fuel.2020.118925.
   Google Scholar
• Fazal, M. A., A. S. M. A. Haseeb, and H. H. Masjuki. 2011a. “Biodiesel Feasibility Study: An Evaluation of Material Compatibility; Performance; Emission and Engine Durability.” Renewable and Sustainable Energy Reviews 15 (2): 1314–1324. https://doi.org/10.1016/j.rser.2010.10.004.
   Web of Science ®Google Scholar
• Fazal, M. A., A. S. M. A. Haseeb, and H. H. Masjuki. 2011b. “Effect of Different Corrosion Inhibitors on the Corrosion of Cast Iron in Palm Biodiesel.” Fuel Processing Technology 92 (11): 2154–2159. https://doi.org/10.1016/j.fuproc.2011.06.012.
   Web of Science ®Google Scholar
• Fazal, M. A., A. S. M. A. Haseeb, and H. H. Masjuki. 2013. “Investigation of Friction and Wear Characteristics of Palm Biodiesel.” Energy Conversion and Management 67: 251–256. https://doi.org/10.1016/j.enconman.2012.12.002.
   Web of Science ®Google Scholar
• Fazal, M. A., A. S. M. A. Haseeb, and H. H. Masjuki. 2014. “A Critical Review on the Tribological Compatibility of Automotive Materials in Palm Biodiesel.” Energy Conversion and Management 79: 180–186. https://doi.org/10.1016/j.enconman.2013.12.002.
   Web of Science ®Google Scholar
• Gupta, Himanshu Shekhar, Rakesh Sehgal, and Mohammad Farooq Wani. 2022. “Tribological Characterization of Eco-Friendly Bio-Based Mahua and Flaxseed Oil Through Nanoparticles.” Biomass Conversion and Biorefinery, https://doi.org/10.1007/s13399-022-03174-w.
   Web of Science ®Google Scholar
• Habibullah, M., H. H. Masjuki, M. A. Kalam, M. Gulzar, A. Arslan, and Rehan Zahid. 2015. “Tribological Characteristics of Calophyllum Inophyllum–Based TMP (Trimethylolpropane) Ester as Energy-Saving and Biodegradable Lubricant.” Tribology Transactions 58 (6): 1002–1011. https://doi.org/10.1080/10402004.2015.1025934.
   Web of Science ®Google Scholar
• Habibullah, M., H. H. Masjuki, M. A. Kalam, N. W. M. Zulkifli, B. M. Masum, A. Arslan, and M. Gulzar. 2015. “Friction and Wear Characteristics of Calophyllum Inophyllum Biodiesel.” Industrial Crops and Products 76: 188–197. https://doi.org/10.1016/j.indcrop.2015.05.042.
   Web of Science ®Google Scholar
• Haseeb, A. S. M. A., S. Y. Sia, M. A. Fazal, and H. H. Masjuki. 2010. “Effect of Temperature on Tribological Properties of Palm Biodiesel.” Energy 35 (3): 1460–1464. https://doi.org/10.1016/j.energy.2009.12.001.
   Web of Science ®Google Scholar
• Hu, J., Z. Du, C. Li, and E. Min. 2005. “Study on the Lubrication Properties of Biodiesel as Fuel Lubricity Enhancers.” Fuel, https://doi.org/10.1016/j.fuel.2005.02.009.
   Web of Science ®Google Scholar
• Knothe, Gerhard. 2010. “Biodiesel and Renewable Diesel: A Comparison.” Progress in Energy and Combustion Science 36 (3): 364–373. https://doi.org/10.1016/j.pecs.2009.11.004.
   Web of Science ®Google Scholar
• Knothe, Gerhard, and Luis F. Razon. 2017. “Biodiesel Fuels.” Progress in Energy and Combustion Science 58: 36–59. https://doi.org/10.1016/j.pecs.2016.08.001.
   Web of Science ®Google Scholar
• Kumar, Ashwani, and Satyawati Sharma. 2011. “Potential Non-Edible Oil Resources as Biodiesel Feedstock: An Indian Perspective.” Renewable and Sustainable Energy Reviews 15 (4): 1791–1800. https://doi.org/10.1016/j.rser.2010.11.020.
   Web of Science ®Google Scholar
• Kumar, Mukesh, and M. P. Sharma. 2015. “Assessment of Potential of Oils for Biodiesel Production.” Renewable and Sustainable Energy Reviews 44: 814–823. https://doi.org/10.1016/j.rser.2015.01.013.
   Web of Science ®Google Scholar
• Kumar, Mukesh, and Mahendra Pal Sharma. 2016. “Selection of Potential Oils for Biodiesel Production.” Renewable and Sustainable Energy Reviews 56: 1129–1138. https://doi.org/10.1016/j.rser.2015.12.032.
   Web of Science ®Google Scholar
• Masjuki, H. H., and M. A. Maleque. 1997. “Investigation of the Anti-Wear Characteristics of Palm Oil Methyl Ester Using a Four-Ball Tribometer Test.” Wear 206 (1–2): 179–186. https://doi.org/10.1016/s0043-1648(96)07351-6.
   Web of Science ®Google Scholar
• Milano, Jassinnee, Abdul Halim Shamsuddin, A. S. Silitonga, A. H. Sebayang, Munawar Alfansury Siregar, H. H. Masjuki, Muhammad Anhar Pulungan, Shir Reen Chia, and M. F. M. A. Zamri. 2022. “Tribological Study on the Biodiesel Produced from Waste Cooking Oil, Waste Cooking Oil Blend with Calophyllum Inophyllum and Its Diesel Blends on Lubricant Oil.” Energy Reports 8 (November): 1578–1590. https://doi.org/10.1016/j.egyr.2021.12.059.
   Google Scholar
• Miller, A. H. 1973. “Considerations in Interpreting Four Ball Data.” Wear 23 (1): 121–127. https://doi.org/10.1016/0043-1648(73)90047-1.
   Web of Science ®Google Scholar
• Mosarof, M. H., M. A. Kalam, H. H. Masjuki, Abdullah Alabdulkarem, M. Habibullah, A. Arslan, and I. M. Monirul. 2016. “Assessment of Friction and Wear Characteristics of Calophyllum Inophyllum and Palm Biodiesel.” Industrial Crops and Products 83: 470–483. https://doi.org/10.1016/j.indcrop.2015.12.082.
   Web of Science ®Google Scholar
• Nivrutti Aitavade, Eknath, and S. C. Kamate. 2021. “Influence of Blend and Oxide Nanoparticle Additive Parameters on Tribological Attributes of Simarouba Glauca Biodiesel (SGME).” Materials Today: Proceedings 44: 2147–2152. https://doi.org/10.1016/j.matpr.2020.12.277.
   Google Scholar
• Ogunkoya, Dolanimi, William L. Roberts, Tiegang Fang, and Nirajan Thapaliya. 2015. “Investigation of the Effects of Renewable Diesel Fuels on Engine Performance, Combustion, and Emissions.” Fuel 140: 541–554. https://doi.org/10.1016/j.fuel.2014.09.061.
   Web of Science ®Google Scholar
• Rajendran, Silambarasan. 2021. “A Comparative Study of Performance and Emission Characteristics of Neat Biodiesel Operated Diesel Engine: A Review.” Journal of Thermal Analysis and Calorimetry 146 (3): 1015–1025. https://doi.org/10.1007/s10973-020-10121-2.
   Web of Science ®Google Scholar
• Rajendran, Silambarasan, and Pranesh Ganesan. 2021. “Experimental Investigations of Diesel Engine Emissions and Combustion Behaviour Using Addition of Antioxidant Additives to Jamun Biodiesel Blend.” Fuel 285 (February): 119157. https://doi.org/10.1016/j.fuel.2020.119157.
   Google Scholar
• Rajendran, Silambarasan, Pranesh Ganesan, and G. Anandkumar. 2023. “A Comparative Assessment on Performance, Combustion and Emission Characteristics of Diesel Engine Fuelled by Juliflora Biodiesel-Diesel Blends.” Australian Journal of Mechanical Engineering 21 (1): 257–269. https://doi.org/10.1080/14484846.2020.1842294.
   Google Scholar
• Schuchardt, Ulf, Ricardo Sercheli, and Rogério Matheus Vargas. 1998. “Transesterification of Vegetable Oils: A Review.” Journal of the Brazilian Chemical Society 9 (3), https://doi.org/10.1590/s0103-50531998000300002.
   Web of Science ®Google Scholar
• Singh, Yashvir, Prateek Negi, Avinash Yadav, and Ritika Tripathi. 2021. “Development of Bio Based Lubricant from Schlichera Oleosa with Effect of Load During Tribological Analysis.” Materials Today: Proceedings 46: 10527–10529. https://doi.org/10.1016/j.matpr.2020.12.1240.
   Google Scholar
• Singh, Paramvir, Varun, and S. R. Chauhan. 2017. “Influence of Temperature on Tribological Performance of Dual Biofuel.” Fuel 207: 751–762. https://doi.org/10.1016/j.fuel.2017.05.094.
   Web of Science ®Google Scholar
• Srinivasan, Gokul Raghavendra, Vijayalakshmi Shankar, Sreekanth Chandra Sekharan, Mamoona Munir, Deepanraj Balakrishnan, Anand Mohanam, and Ranjitha Jambulingam. 2020. “Influence of Fatty Acid Composition on Process Optimization and Characteristics Assessment of Biodiesel Produced from Waste Animal Fat.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, June, 1–19. https://doi.org/10.1080/15567036.2020.1771477.
   Web of Science ®Google Scholar
• “Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)”. 2022. Astm.Org. 2022. https://www.astm.org/d4172-21.html.
   Google Scholar
• Ullah, Kifayat, Mushtaq Ahmad, Sofia, Fahim Ashraf Qureshi, Raheel Qamar, Vinod Kumar Sharma, Shazia Sultana, and Muhammad Zafar. 2015. “Synthesis and Characterization of Biodiesel from Aamla Oil: A Promoting Non-Edible Oil Source for Bioenergy Industry.” Fuel Processing Technology 133: 173–182. https://doi.org/10.1016/j.fuproc.2015.01.013.
   Web of Science ®Google Scholar
• Yadav, Gautam, Sudhir Tiwari, and M. L. Jain. 2018. “Tribological Analysis of Extreme Pressure and Anti-Wear Properties of Engine Lubricating Oil Using Four Ball Tester.” Materials Today: Proceedings 5 (1): 248–253. https://doi.org/10.1016/j.matpr.2017.11.079.
   Google Scholar