48
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Experimental study on an active direct methanol fuel cell (ADMFC) performance with and without porous layer at the anode side

ORCID Icon, ORCID Icon & ORCID Icon
Article: 2281612 | Received 27 Sep 2022, Accepted 11 May 2023, Published online: 07 Dec 2023

References

  • Argyropoulos, P., K. Scott, and W. M. Taama. 1999. “Gas Evolution and Power Performance in Direct Methanol Fuel Cells.” Journal of Applied Electrochemistry 29 (6): 663–671. https://doi.org/10.1023/A:1003589319211.
  • Birgersson, E., J. Nordlund, H. Ekström, M. Vynnycky, and G. Lindbergh. 2003. “Reduced Two-Dimensional One-Phase Model for Analysis of the Anode of a DMFC.” Journal of the Electrochemical Society 150 (10): A1368. https://doi.org/10.1149/1.1606455.
  • Calabriso, A., D. Borello, L. Cedola, L. Del Zotto, and S. G. Santori. 2015. “Assessment of CO2 Bubble Generation Influence on Direct Methanol Fuel Cell Performance.” Energy Procedia 75: 1996–2002. https://doi.org/10.1016/j.egypro.2015.07.254.
  • Chang, I., S. Ha, S. Kim, S. Kang, J. Kim, K. Choi, and S. W. Cha. 2009. “Operational Condition Analysis for Vapor-fed Direct Methanol Fuel Cells.” Journal of Power Sources 188 (1): 205–212. https://doi.org/10.1016/j.jpowsour.2008.11.058.
  • Danilov, V. A., J. Lim, I. L. Moon, and K. H. Choi. 2006. “Gas Management in Flow Field Design Using 3D Direct Methanol Fuel Cell Model Under High Stoichiometric Feed.” Korean Journal of Chemical Engineering 23 (5): 753–760. https://doi.org/10.1007/BF02705923.
  • Fu, B. R., and C. Pan. 2009. “Bubble Growth with Chemical Reactions in Microchannels.” International Journal of Heat and Mass Transfer 52 (3-4): 767–776. https://doi.org/10.1016/j.ijheatmasstransfer.2008.07.018.
  • Ge, J., and H. Liu. 2007. “A Three-Dimensional Two-Phase Flow Model for a Liquid-fed Direct Methanol Fuel Cell.” Journal of Power Sources 163 (2): 907–915. https://doi.org/10.1016/j.jpowsour.2006.10.014.
  • Gündüz, S., and S. Dincer. 1980. “Solubility Behaviour of Polystyrene: Thermodynamic Studies Using Gas Chromatography.” Polymer 21 (9): 1041–1046. https://doi.org/10.1016/0032-3861(80)90035-X.
  • Guo, H., Y. P. Chen, Y. Q. Xue, F. Ye, and C. F. Ma. 2013. “Three-dimensional Transient Modeling and Analysis of Two-Phase Mass Transfer in Air-Breathing Cathode of a Fuel Cell.” International Journal of Hydrogen Energy 38 (25): 11028–11037. https://doi.org/10.1016/j.ijhydene.2013.03.054.
  • Jin, Z., X. Chen, Y. Wang, and D. Wang. 2015. “Thermal Conductivity of PTFE Composites Filled with Graphite Particles and Carbon Fibers.” Computational Materials Science 102: 45–50. https://doi.org/10.1016/j.commatsci.2015.02.019.
  • Kang, S., B. Zhou, and M. Jiang. 2017. “Bubble Behaviors in Direct Methanol Fuel Cell Anode with Parallel Design.” International Journal of Hydrogen Energy 42 (31): 20201–20215. https://doi.org/10.1016/j.ijhydene.2017.06.149.
  • Kulikovsky, A. A. 2005. “Model of the Flow with Bubbles in the Anode Channel and Performance of a Direct Methanol Fuel Cell.” ElectrochemistryCommunications 7 (2): 237–243.
  • Kulikovsky, A. A. 2006. “Bubbles in the Anode Channel and Performance of a DMFC: Asymptotic Solutions.” Electrochimica Acta 51 (10): 2003–2011. https://doi.org/10.1016/j.electacta.2005.06.032.
  • Lakshminarayanan, V., K. Niveda, S. Akash, and P. Anand. 2021. “Numerical Analysis for Two Pass Interdigitated Flow Channel of PEMFC.” International Journal of Ambient Energy 42 (8): 907–911. https://doi.org/10.1080/01430750.2019.1568911.
  • Liao, Q., X. Zhu, X. Zheng, and Y. Ding. 2007. “Visualization Study on the Dynamics of CO2 Bubbles in Anode Channels and Performance of a DMFC.” Journal of Power Sources 171 (2): 644–651. https://doi.org/10.1016/j.jpowsour.2007.06.257
  • Liu, J. G., T. S. Zhao, Z. X. Liang, and R. Chen. 2006. “Effect of Membrane Thickness on the Performance and Efficiency of Passive Direct Methanol Fuel Cells.” Journal of Power Sources 153 (1): 61–67. https://doi.org/10.1016/j.jpowsour.2005.03.190.
  • Lu, G. Q., and C. Y. Wang. 2004. “Electrochemical and Flow Characterization of a Direct Methanol Fuel Cell.” Journal of Power Sources 134 (1): 33–40. https://doi.org/10.1016/j.jpowsour.2004.01.055.
  • Mesbahi, A. H., D. Semnani, and S. N. Khorasani. 2012. “Performance Prediction of a Specific Wear Rate in Epoxy Nanocomposites with Various Composition Content of Polytetrafluoroethylen (PTFE), Graphite, Short Carbon Fibers (CF) and Nano-TiO2 Using Adaptive Neuro-Fuzzy Inference System (ANFIS).” Composites Part B: Engineering 43 (2): 549–558. https://doi.org/10.1016/j.compositesb.2011.11.026.
  • Rana, D., K. Bag, S. N. Bhattacharyya, and B. M. Mandal. 2000. “Miscibility of Poly(Styrene-co-Butyl Acrylate) with Poly(Ethyl Methacrylate): Existence of Both UCST and LCST.” Journal of Polymer Science Part B: Polymer Physics 38 (3): 369–375. https://doi.org/10.1002/(SICI)1099-0488(20000201)38:3<369::AID-POLB3>3.0.CO;2-W.
  • Rana, D., B. M. Mandal, and S. N. Bhattacharyya. 1993. “Miscibility and Phase Diagrams of Poly(Phenyl Acrylate) and Poly(Styrene-co-Acrylonitrile) Blends.” Polymer 34 (7): 1454–1459. https://doi.org/10.1016/0032-3861(93)90861-4.
  • Rana, D., B. M. Mandal, and S. N. Bhattacharyya. 1996a. “Analogue Calorimetric Studies of Blends of Poly(Vinyl Ester)s and Polyacrylates.” Macromolecules 29 (5): 1579–1583. https://doi.org/10.1021/ma950954n.
  • Rana, D., B. M. Mandal, and S. N. Bhattacharyya. 1996b. “Analogue Calorimetry of Polymer Blends: Poly(Styrene-co-Acrylonitrile) and Poly(Phenyl Acrylate) or Poly(Vinyl Benzoate).” Polymer 37 (12): 2439–2443. https://doi.org/10.1016/0032-3861(96)85356-0.
  • Su, X., W. Yuan, B. Lu, T. Zheng, Y. Ke, Z. Zhuang, Y. Zhao, Y. Tang, and S. Zhang. 2020. “CO2 Bubble Behaviors and Two-Phase Flow Characteristics in Single-Serpentine Sinusoidal Corrugated Channels of Direct Methanol Fuel Cell.” Journal of Power Sources 450: 227621. https://doi.org/10.1016/j.jpowsour.2019.227621.
  • Truong, V. M., N. B. Duong, and H. Yang. 2021. “Effect of Gas Diffusion Layer Thickness on the Performance of Anion Exchange Membrane Fuel Cells.” Processes 9 (4): 718. https://doi.org/10.3390/pr9040718.
  • Tsukagoshi, Y., H. Ishitobi, and N. Nakagawa. 2018. “Improved Performance of Direct Methanol Fuel Cells with the Porous Catalyst Layer Using Highly-Active Nanofiber Catalyst.” Carbon Resources Conversion 1 (1): 61–72. https://doi.org/10.1016/j.crcon.2018.03.001.
  • Wang, T. 2011. “Simulation of Bubble Column Reactors Using CFD Coupled with a Population Balance Model.” Frontiers of Chemical Science and Engineering 5 (2): 162–172. https://doi.org/10.1007/s11705-009-0267-5.
  • Yan, X. H., T. S. Zhao, L. An, G. Zhao, and L. Zeng. 2014. “A Micro-Porous Current Collector Enabling Passive Direct Methanol Fuel Cells to Operate with Highly Concentrated Fuel.” Electrochimica Acta 139: 7–12. https://doi.org/10.1016/j.electacta.2014.06.150.
  • Yang, H., T. S. Zhao, and Q. Ye. 2005. “In Situ Visualization Study of CO2 Gas Bubble Behavior in DMFC Anode Flow Fields.” Journal of Power Sources 139 (1-2): 79–90. https://doi.org/10.1016/j.jpowsour.2004.05.033.
  • Yuan, W., A. Wang, G. Ye, B. Pan, K. Tang, and H. Chen. 2017. “Dynamic Relationship Between the CO2 gas Bubble Behavior and the Pressure Drop Characteristics in the Anode Flow Field of an Active Liquid-Feed Direct Methanol Fuel Cell.” Applied Energy 188: 431–443. https://doi.org/10.1016/j.apenergy.2016.12.040.
  • Yutao, L., and Z. Minggang. 2022. “Performance Investigation on the Radial Flow Channel of Proton Exchange Membrane Fuel Cell.” International Journal of Ambient Energy 43 (1): 4491–4498.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.