134
Views
0
CrossRef citations to date
0
Altmetric
Review

Recent challenges and reviews on sensorless, PWM techniques and controller possibilities of permanent magnet motors for electric vehicle applications

ORCID Icon, , &
Article: 2281613 | Received 04 Mar 2021, Accepted 04 Sep 2023, Published online: 30 Nov 2023

References

  • Abraham, Jeen Ann, and Sanjeev Shrivastava. 2018. “DC Motor Speed Control Using Machine Learning Algorithm.” International Journal of Engineering Research & Technology (IJERT) 7 (04): 33–37. https://doi.org/10.15623/ijret.2018.0704006
  • Acarnley, P. P., and J. F. Watson. 2006. “Review of Position-Sensorless Operation of Brushless Permanent-Magnet Machines.” IEEE Transactions on Industrial Electronics 53 (2): 352–362. https://doi.org/10.1109/TIE.2006.870868.
  • Ali, Dr, Emad, Jürgen Weber Ing, and Matthias Wahler. 2016. “A Machine Learning Approach for Tracking the Torque Losses in Internal Gear Pump – AC Motor Units.” 10th International Fluid Power Conference: 121–133. Dresden.
  • Ashokkumar, R., M. Suresh, B. Sharmila, Hitesh Panchal, C. Gokul, K. V. Udhayanatchi, Kishor Kumar Sadasivuni, and Mohammad Israr. 2020. “A Novel Method for Arduino Based Electric Vehicle Emulator.” International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2020.1860129.
  • Aslan, B., E. Semail, J. Korecki, and J. Lagranger. 2011. “Slot/pole Combinations Choice for Concentrated Multiphase Machines dedicated to Mild-Hybrid Applications.” IEEE Annual Conference on Industrial Electronic Society (IECON 11), Australia.
  • Aydin, M., R. Qu, and T. Lipo. 2003. “Cogging Torque Minimization Technique for Multiple-Rotor, Axial-Flux, Surface-Mounted-PM Motors: Alternating Magnet Pole-Arcs in Facing Rotors.” in IEEE IAS Annual Meeting, Utah.
  • Aydin, M., Z. Q. Zhu, T. A. Lipo, and D. Howe. 2007. “Minimization of Cogging Torque in Axial-Flux Permanent-Magnet Machines: Design Concepts.” IEEE Transactions on Magnetics 43 (9): 3614–3622. https://doi.org/10.1109/TMAG.2007.902818.
  • Bae, J., and D. Lee. 2018. “Position Control of a Rail Guided Mover Using a Low-Cost BLDC Motor.” IEEE Transactions on Industry Applications 54 (3): 2392–2399. https://doi.org/10.1109/TIA.2018.2808930.
  • Balan, Gunapriya, Suma Christal Mary Sundararajan, Singaravelan Arumugam, Mathankumar Manoharan, Karthik Muthukrishnan, Suresh Muthusamy, Hitesh Panchal, Kumaresan Varadharaj, Kishor Kumar Sadasivuni, and Santhakumar Jayakumar. 2022. “Performance Analysis and Enhancement of Brain Emotion-Based Intelligent Controller and its Impact on PMBLDC Motor Drive for Electric Vehicle Applications.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 44 (3): 5640–5664. https://doi.org/10.1080/15567036.2022.2027578.
  • Basak, D., S. Pal, and D. C. Patranabis. 2007. “Support Vector Regression.” Neural Information Processing-Letters and Reviews 11 (10): 203–224.
  • Bertoluzzo, Manuele, Giuseppe Buja, Ritesh Kumar Keshri, and Roberto Menis. 2015. “Sinusoidal Versus Square-Wave Current Supply of PM Brushless DC Drives: A Convenience Analysis.” IEEE Transactions on Industrial Electronics 62 (12): 7339–7348. https://doi.org/10.1109/TIE.2015.2455518
  • Buja, G. S., and M. P. Kazmierkowski. 2004. “Direct Torque Control of PWM Inverter-fed AC Motors – A Survey.” IEEE Transactions on Industrial Electronics 51 (4): 744–757. https://doi.org/10.1109/TIE.2004.831717.
  • Chen, Yong, Siyuan Liang, Wanfu Li, Hong Liang, and Chengdong Wang. 2019. “Faults and Diagnosis Methods of Permanent Magnet Synchronous Motors: A Review.” Applied Sciences 9: 1–16.
  • Cira, F., M. Arkan, B. Gumus, and T. Goktas. 2016. “Analysis of Stator Inter-Turn Short-Circuit Fault Signatures for Inverter-Fed Permanent Magnet Synchronous Motors.” in Proceedings of the IECON 42nd Annual Conference of the IEEE Industrial Electronics Society: 1453–1457. Florence, Italy.
  • Damodharan, P., and K. Vasudevan. 2010. “Sensorless Brushless DC Motor Drive Based on the Zero-Crossing Detection of Back Electromotive Force (EMF) from the Line Voltage Difference.” IEEE Transactions on Energy Conversion 25 (3): 661–668. https://doi.org/10.1109/TEC.2010.2041781.
  • De Castro, A. G., W. C. A. Pereira, T. E. P. de Almeida, C. M. R. de Oliveira, J. Roberto Boffino de Almeida Monteiro, and A. A. de Oliveira. 2018. “Improved Finite Control-Set Model-Based Direct Power Control of BLDC Motor with Reduced Torque Ripple.” IEEE Transactions on Industry Applications 54 (5): 4476–4484. https://doi.org/10.1109/TIA.2018.2835394.
  • Demir, Y., A. M. EL-Refaie, and M. Aydin. 2021. “Investigation of Asymmetric and Unbalanced Winding Structures for 3-Phase Permanent Magnet Synchronous Machines.” IEEE Transactions on Energy Conversion 36 (3): 1722–1732. https://doi.org/10.1109/TEC.2020.3044000.
  • The Diplomat. 2020. Accessed on April 29, 2020. https://thediplomat.com/2020/04/after-covid-19-manufacturing-indias-new-economic-potential/.
  • Dou, R., F. Song, H. Liu, and X. Men. 2018. “Demagnetization Quantification of PMSM Based on Support Vector Regression.” in Proceedings of the Prognostics and System Health Management Conference (PHM-Chongqing): 619–623. Chongqing, China.
  • Drucker, H., H. Drucker, C. J. C. Burges, L. Kaufman, A. Smola, and V. Vapnik. 1997. “Support Vector Regression Machines.” Advances in Neural Information Processing System 9 (9): 155–161.
  • The Economic Times News: Manufacturing sector anticipates severe workforce crunch post Covid-19. Accessed on January 01, 2021. https://economictimes.indiatimes.com/news/company/corporate-trends/manufacturing-sector-anticipates-severe-workforce-crunch-post-covid-19/articleshow/75084233.cms.
  • Economic Times: Energy World. Accessed on Decemeber 30, 2021. https://energy.economictimes.indiatimes.com/news/power/coronavirus-impact-within-ten-days-26-per-cent-fall-in-indias-energy-consumption/74854825.
  • Elmas, C., O. Ustun, and H. H. Sayan. 2008. “ANeuro-Fuzzy Controller for Speed Control of a Permanent Magnet Synchronous Motor Drive.” Expert Systems with Applications 34 (1): 657–664. https://doi.org/10.1016/j.eswa.2006.10.002
  • Ertugrul, N., and P. Acarnley. 1994. “A New Algorithm for Sensorless Operation of Permanent Magnet Motors.” IEEE Transactions on Industry Applications 30 (1): 126–133. https://doi.org/10.1109/28.273630.
  • Estima, J. O., and A. J. M. Cardoso. 2011. “A Fault-Tolerant Permanent Magnet Synchronous Motor Drive with Integrated Voltage Source Inverter Open-Circuit Faults Diagnosis.” Proceedings of 14th European Conference on Power Electronics and Applications.
  • Financial Express. “Covid-19 Effect: Time for Made-in-India Tag to Go Global.” Accessed on May 30, 2021. https://www.financialexpress.com/economy/covid-19-effect-time-for-made-in-india-tag-to-go-global/1968616/.
  • Geng, Q., Z. Li, M. Zhang, Z. Zhou, H. Wang, and T. Shi. Feb. 2022. “Sensorless Control Method for Dual Permanent Magnet Synchronous Motors Driven by Five-Leg Voltage Source Inverter.” IEEE Journal of Emerging and Selected Topics in Power Electronics 10 (1): 260–272. https://doi.org/10.1109/JESTPE.2021.3096198.
  • Gupta, R. A., R. Kumar, and A. K. Bansal. 2010. “Artificial Intelligence Applications in Permanent Magnet Brushless DC Motor.” ArtifIntell Reviews 33: 175–186.
  • Hanselman, D. C. 1994. “Minimum Torque Ripple, Maximum Efficiency Excitation of Brushless Permanent Magnet Motors.” IEEE Transactions on Industrial Electronics 41 (3): 292–300. https://doi.org/10.1109/41.293899.
  • Hoo, Choonlih, and Sallehuddin Mohamed Haris. 2011. “A Brief Survey on Artificial Intelligence Methods in Synchronous Motor Control.” Applied Mechanics and Materials 52–54: 198–204. https://doi.org/10.4028/www.scientific.net/AMM.52-54.198
  • Hwang, Sang-Moon, Jae-Boo Eom, Geun-Bae Hwang, Weui-Bong Jeong, and Yoong-Ho Jung. 2000. “Cogging Torque and Acoustic Noise Reduction in Permanent Magnet Motors by Teeth Pairing.” IEEE Transactions on Magnetics 36 (5): 3144–3146. https://doi.org/10.1109/20.908714.
  • Hwang, C. C., S. B. John, and S. S. Wu. 1998. “Reduction of Cogging Torque in Spindle Motors for CD-ROM Drive.” IEEE Transactions on Magnetics 34 (2): 468–470. https://doi.org/10.1109/20.667794.
  • Iizuka, K., H. Uzuhashi, M. Kano, T. Endo, and K. Mohri. 1985. “Microcomputer Control for Sensorless Brushless Motor.” IEEE Transactions on Industry Applications IA-21 (3): 595–601. https://doi.org/10.1109/TIA.1985.349715.
  • Ishikawa, T., Y. Seki, and N. Kurita. 2013. “Analysis for Fault Detection of Vector-Controlled Permanent Magnet Synchronous Motor with Permanent Magnet Defect.” IEEE Transactions on Magnetics 49 (5): 2331–2334. https://doi.org/10.1109/TMAG.2013.2243135.
  • Jadeja, R., S. K. Chauhan, and A. D. Ved. 2015. ““An Investigation on the Performance of Random PWM Controlled Converters.” Engineering, Technology and Applied Science Research 5 (6): 876–884. https://doi.org/10.48084/etasr.599
  • Jahns, T. M., R. C. Becerra, and M. Ehsani. 1991. “Integrated Current Regulation for a Brushless ECM Drive.” IEEE Transactions on Power Electronics 6 (1): 118–126. https://doi.org/10.1109/63.65010.
  • Jan, R. M., C.-S. Tseng, and R.-J. Liu. 2008. “Robust PID Control Design for Permanent Magnet Synchronous Motor: A Genetic Approach.” Electric Power Systems Research 78 (7): 1161–1168. https://doi.org/10.1016/j.epsr.2007.09.011
  • Jin, H., G. Liu, H. Li, and H. Zhang. 2021. “Closed-Loop Compensation Strategy of Commutation Error for Sensorless Brushless DC Motors With Nonideal Asymmetric Back-EMFs.” IEEE Transactions on Power Electronics 36 (10): 11835–11846. https://doi.org/10.1109/TPEL.2021.3066783.
  • Jin, L., F. Wang, and Q. Yang. 2017. “Performance Analysis and Optimization of Permanent Magnet Synchronous Motor based on Deep Learning.” 20th International Conference on Electrical Machines and Systems (ICEMS): 1–5. Sydney, NSW. https://doi.org/10.1109/ICEMS.2017.8056321.
  • Johnson, J. P., M. Ehsani, and Y. Guzelgunler. 1999. “Review of sensorless methods for brushless DC.” Conference Record of the IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370)1: 143–150. Phoenix, AZ, USA. https://doi.org/10.1109/IAS.1999.799944.
  • Karthik, M., S. Usha, K. Venkateswaran, Hitesh Panchal, M. Suresh, V. Priya, and K. K. Hinduja. 2020. “Evaluation of Electromagnetic Intrusion in Brushless DC Motor Drive for Electric Vehicle Applications with Manifestation of Mitigating the Electromagnetic Interference.” International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2020.1839546.
  • Khazaee, A., H. A. Zarchi, G. A. Markadeh, and H. Mosaddegh Hesar. 2021. “MTPA Strategy for Direct Torque Control of Brushless DC Motor Drive.” IEEE Transactions on Industrial Electronics 68 (8): 6692–6700. https://doi.org/10.1109/TIE.2020.3009576.
  • Kim, Tae-Hyung, and M. Ehsani. 2004. “Sensorless Control of the BLDC Motors from Near-Zero to High Speeds.” IEEE Transactions on Power Electronics 19 (6): 1635–1645. https://doi.org/10.1109/TPEL.2004.836625.
  • Kirlin, R. L., M. M. Bech, and A. M. Trzynadlowski. 2002. “Analysis of Power and Power Spectral Density in PWM Inverters with Randomized Switching Frequency.” IEEE Transactions on Industrial Electronics 49 (2): 486–499. https://doi.org/10.1109/41.993282.
  • Krishnakumar, V., V. Kamaraj, and C. Adrien. 2016. “An Integrated Drive for Two PMSMs Involved Automotive Applications and Development of Current Reference Expanded Two Arm Modulation.” Circuits and Systems 7 (08): 1794–1815. https://doi.org/10.4236/cs.2016.78155
  • Krishnakumar, V., V. Kamaraj, and S. Jeevananthan. 2014. “Random Pulse Width Modulation for Performance Improvement of Brushless DC Motor Drive.” IEEE 2nd International Conference on Electrical Energy Systems (ICEES): 157–163. Chennai. https://doi.org/10.1109/ICEES.2014.6924160.
  • Kuptsov, V., P. Fajri, A. Trzynadlowski, G. Zhang, and S. Magdaleno-Adame. 2019. “Electromagnetic Analysis and Design Methodology for Permanent Magnet Motors Using MotorAnalysis-PM Software.” Machines 7 (75): 1–18.
  • Lan, H., Q. Chen, J. Zou, Y. Xu, M. Wang, and M. Liu. 2017. “Influence of Dummy Slots on Noise and Vibration Performance in Permanent Magnet Synchronous Machines.” IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific): 1–6. Harbin. https://doi.org/10.1109/ITEC-AP.2017.8080970.
  • Lee, Y., and J. Kim. 2019. “Analysis of the Three-Phase Inverter Power Efficiency of a BLDC Motor Drive Using Conventional Six-Step and Inverted Pulsewidth Modulation Driving Schemes.” Canadian Journal of Electrical and Computer Engineering 42 (1): 34–40. https://doi.org/10.1109/CJECE.2018.2885351.
  • Lee, W., J. H. Kim, W. Choi, and B. Sarlioglu. 2018. “Torque Ripple Minimization Control Technique of High-Speed Single-Phase Brushless DC Motor for Electric Turbocharger.” IEEE Transactions on Vehicular Technology 67 (11): 10357–10365. https://doi.org/10.1109/TVT.2018.2866779.
  • Li, Yaohua, and Dieter Gerling. 2010. “The Comparison of Control Strategies for the Interior PMSM Drive used in the Electric Vehicle.” 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov 5–9.
  • Li, Y., X. Song, X. Zhou, Z. Huang, and S. Zheng. 2020. “A Sensorless Commutation Error Correction Method for High-Speed BLDC Motors Based on Phase Current Integration.” IEEE Transactions on Industrial Informatics 16 (1): 328–338. https://doi.org/10.1109/TII.2019.2917608.
  • Li, Guang-Ye, Jian-Ru Wan, Ying-Pei Liu, Shen Hong, and Chen-Hu Yuan. 2009. “Permanent Magnet Synchronous Motor Direct Torque Control with Zero Vector Based on Inteligent Method.” International Conference on Machine Learning and Cybernetics: 12–15. Hebei, China.
  • Li, Jun, Jiajun Yu, and Zhenxing Chen. 2013. “A Review of Control Strategies for Permanent Magnet Synchronous Motor Used in Electric Vehicles.” Applied Mechanics and Materials 321–324: 1679–1685. https://doi.org/10.4028/www.scientific.net/AMM.321-324.1679.
  • Libert, F., and J. Soulard. 2004. “Investigation on Pole-Slot Combinations for Permanent-Magnet Machines with Concentrated Windings.” in IEEE International Conference on Electrical Machines (ICEM 04), Cracow, Poland.
  • Lin, F. J., and R. J. Wai. 2008. “Robust Recurrent Fuzzy Neural Network Control for Linear Synchronous Motor Drive System.” Neurocomputing 50: 365–390. https://doi.org/10.1016/S0925-2312(02)00572-6
  • Lynn Kirlin, R., M., Bech Michael, and M., Trzynadlowski Andrzej. 2002. “Analysis of Power and Power Spectral Density in PWM Inverters with Randomized Switching Frequency.” IEEE Transactions on Industrial Electronics 49 (2): 486–499. https://doi.org/10.1109/41.993282
  • Ma, G., G. Li, R. Zhou, X. Guo, L. Ju, and F. Xie. 2017. “Effect of Stator and Rotor Notches on Cogging Torque of Permanent Magnet Synchronous Motor.” 20th International Conference on Electrical Machines and Systems (ICEMS): 1-5. Sydney, NSW. https://doi.org/10.1109/ICEMS.2017.8055918.
  • Mani, P., R. Rajan, L. Shanmugam, and Y. H. Joo. 2019. “Adaptive Fractional Fuzzy Integral Sliding Mode Control for PMSM Model.” IEEE Transactions on Fuzzy Systems 27 (8): 1674–1686. https://doi.org/10.1109/TFUZZ.2018.2886169.
  • Mongabay Series: Environment and Health, Environomy. 2020. Accessed on January 20, 2022. https://india.mongabay.com/2020/04/indias-power-consumption-falls-by-19-percent-during-covid-19-lockdown/.
  • Montgomery, D. C., E. A. Peck, and G. G. Vining. 2015. Introduction to Linear Regression Analysis. John Wiley.
  • Moosavi, S. S., Q. Esmaili, A. Djerdir, and Y. A. Amirat. 2017. “Inter-Turn Fault Detection in StatorWinding of PMSM UsingWavelet Transform.” in Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC): 1–5. Belfort, France.
  • Moreira, J. C. 1996. “Indirect Sensing for Rotor Flux Position of Permanent Magnet AC Motors Operating Over a Wide Speed Range.” IEEE Transactions on Industry Applications 32 (6): 1394–1401. https://doi.org/10.1109/28.556643.
  • Mousmi, A., A. Abbou, and Y. El Houm. 2020. “Binary Diagnosis of Hall Effect Sensors in Brushless DC Motor Drives.” IEEE Transactions on Power Electronics 35 (4): 3859–3868. https://doi.org/10.1109/TPEL.2019.2934794.
  • Nandi, S., H. A. Toliyat, and X. Li. 2005. “Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review.” IEEE Transaction on Energy Conversion 20 (4): 719–729. https://doi.org/10.1109/TEC.2005.847955
  • Negnevitsky, M. 2005. Artificial Intelligence: A Guide to Intelligent Systems 2nd ed. England: Pearson Education Limited.
  • Ogasawara, S., and H. Akagi. 1991. “An Approach to Position Sensorless Drive for Brushless DC Motors.” IEEE Transactions on Industry Applications 27 (5): 928–933. https://doi.org/10.1109/28.90349.
  • Ohio Electric Motors. 2015. Accessed on May 20, 2021. http://www.ohioelectricmotors.com/2015/07/a-historical-overview-of-permanent-magnet-motors/.
  • Ozturk, S. B., and H. A. Toliyat. 2011. “Direct Torque and Indirect Flux Control of Brushless DC Motor.” IEEE/ASME Transactions on Mechatronics 16 (2): 351–360. https://doi.org/10.1109/TMECH.2010.2043742.
  • Pacas, M., and J. Weber. 2005. “Predictive Direct Torque Control for the PM Synchronous Machine.” IEEE Transactions on Industrial Electronics 52 (5): 1350–1356. https://doi.org/10.1109/TIE.2005.855662.
  • Park, J. K., J.-H. Lee, S.-K. Kim, and C. K. Ahn. 2021. “Output-Feedback Speed-Tracking Control Without Current Feedback for BLDCMs Based on Active-Damping and Invariant Surface Approach.” IEEE Transactions on Circuits and Systems II: Express Briefs 68 (7): 2528–2532. https://doi.org/10.1109/TCSII.2021.3049168.
  • Patel, Mahesh A., Kamran Asad, Zeel Patel, Mohit Tiwari, Purv Prajapati, Hitesh Panchal, M. Suresh, Ralli Sangno, and Mohammd Israr. 2021. “Design and Optimization of Slotted Stator Tooth Switched Reluctance Motor for Torque Enhancement for Electric Vehicle Applications.” International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2021.1873857.
  • Perl, J. 2004. “Artificial Neural Networks in Motor Control Research.” Clinical Biomechanics 19 (9): 873–875. https://doi.org/10.1016/j.clinbiomech.2004.04.010
  • Quinlan, J. R. 1986. “Induction of Decision Trees.” Machine Learning 1 (1): 81–106.
  • Rahman, M. A., and M. A. Hoque. 1998. “On-line Adaptive Artificial Neural Network Based Vector Control of Permanent Magnet Synchronous Motors.” IEEE Transactions on Energy Conversion 13 (4): 311–318. https://doi.org/10.1109/60.736315.
  • Rajasekaran, R., Gokulalakshmi Arunachalam, Padmanathan Kasinathan, Ramkumar Devendiran, P. Ahmadi, Santhiya Pandiyan, Suresh Muthusamy, Hitesh Panchal, Hussein A Kazem, and Prabhakar Sharma. 2022. ““A Novel Intelligent Transport System Charging Scheduling for Electric Vehicles Using Grey Wolf Optimizer and Sail Fish Optimization Algorithms.” Energy Sources Part A: Recovery, Utilization, and Environmental Effects 44 (2): 3555–3575. https://doi.org/10.1080/15567036.2022.2067268.
  • Rathnakumar, D., J. LakshmanaPerumal, and T. Srinivasan. 2005. “A New Software Implementation of Space Vector PWM.” Conference Proceedings of IEEE Southeast, 131–136.
  • Rong Chen. 2009. PMSM Control System. Beijing: China Water Power Press.
  • Rosero, R. A., J. Cusido, A. Garcia, J. A. Ortega, and L. Romeral. 2006. “Broken Bearings and Eccentricity Fault Detection for a Permanent Magnet Synchronous Motor.” in Proceedings of the IECON 32nd Annual Conference on IEEE Industrial Electronics: 964–969. Paris, France.
  • Sen, A., and B. Singh. 2021. “Peak Current Detection Starting Based Position Sensorless Control of BLDC Motor Drive for PV Array Fed Irrigation Pump.” IEEE Transactions on Industry Applications 57 (3): 2569–2577. https://doi.org/10.1109/TIA.2021.3066831.
  • Shakila Banu, A., and R. S. D. Wahida Banu. 2013. “Comparative Performance Analysis of IPMSM Drive Using Antiwindup and Fuzzy PI Controller.” Archives Des Sciences 66 (3): 412–423.
  • Shakila Banu, A., and R. S. D. Wahida Banu. 2014. “Performance Analysis of an Interior Permanent Magnet Synchronous Motor Using Brain Emotional Learning Based Intelligent Controller.” ARPN Journal of Engineering and Applied Sciences 9 (12): 2816–2822.
  • Sharma, R. K., V. Sanadhya, L. Behera, and S. Bhattacharya. 2008. ““Vector Control of a Permanent Magnet Synchronous Motor.” Annual IEEE India Conference, Kanpur, 81–86. https://doi.org/10.1109/INDCON.2008.4768805.
  • Sharmila, B., K. Srinivasan, D. Devasena, M. Suresh, Hitesh Panchal, R. Ashokkumar, R. Meenakumari, Kishor Kumar sadasivuni, and Ronakkumar Rajnikant Shah. 2021. “Modelling and Performance Analysis of Electric Vehicle.” International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2021.1932587.
  • Sheela, M. Suresh, V. Gowri Shankar, Hitesh Panchal, V. Priya, M. Atshaya, Kishor Kumar Sadasivuni, and Swapnil Dharaskar. 2020. “FEA Based Analysis and Design of PMSM for Electric Vehicle Applications Using Magnet Software.” International Journal of Ambient Energy, https://doi.org/10.1080/01430750.2020.1762736.
  • Shodhganga: A reservoir of Indian theses. 2022. Accessed on January 2022. https://shodhganga.inflibnet.ac.in/bitstream/10603/43045/10/10_chapter5.pdf.
  • Song, X., B. Han, and K. Wang. 2019. “Sensorless Drive of High-Speed BLDC Motors Based on Virtual Third-Harmonic Back EMF and High-Precision Compensation.” IEEE Transactions on Power Electronics 34 (9): 8787–8796. https://doi.org/10.1109/TPEL.2018.2885031.
  • Studer, C., A. Keyhani, T. Sebastian, and S. K. Murthy. 1997. “Study of Cogging Torque in Permanent Magnet Machines.” IAS ‘97 Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting 1: 42–49. New Orleans, LA, USA. https://doi.org/10.1109/IAS.1997.643006.
  • Sudhoff, S. D., J. Cale, B. Cassimere, and M. Swinney. 2005. “Genetic Algorithm Based Design of a Permanent Magnet Synchronous Machine.” IEEE International Conference on Electric Machines and Drive: 1011–1019. San Antonio, TX. https://doi.org/10.1109/IEMDC.2005.195846.
  • The Times of India: How the Rs. 20 Lakh Crore Economic pacakage adds up. Accessed on December 30, 2021. https://timesofindia.indiatimes.com/business/india-business/how-the-20-lakh-crore-economic-package-adds-up/articleshow/75795943.cms.
  • Tong, W., L. Sun, S. Wu, M. Hou, and R. Tang. 2022. “Analytical Model and Experimental Verification of Permanent Magnet Eddy Current Loss in Permanent Magnet Machines with Nonconcentric Magnetic Poles.” IEEE Transactions on Industrial Electronics 69 (9): 8815–8824. https://doi.org/10.1109/TIE.2021.3111573.
  • Trivedi, M. S., and R. K. Keshri. 2020. “Evaluation of Predictive Current Control Techniques for PM BLDC Motor in Stationary Plane.” IEEE Access 8: 46217–46228. https://doi.org/10.1109/ACCESS.2020.2978695.
  • Trzynadlowski, A. M., F. Blaabjerg, J. K. Pedersen, R. L. Kirlin, and S. Legowski. 1994. “Random Pulse Width Modulation Techniques for Converter-Fed Drive Systems-a Review.” IEEE Transactions on Industry Applications 30 (5): 1166–1175. https://doi.org/10.1109/28.315226.
  • Ustun, S. V., and M. Demirtas. 2008. “Optimal Tuning of PI Coefficients by Using Fuzzy-Genetic for V/f Controlled Induction Motor.” Expert Systems with Applications 34 (4): 2714–2720. https://doi.org/10.1016/j.eswa.2007.05.029
  • Vijayaragavan, M., V. Krishnakumar, and V. Vasan Prabhu. 2022. “Energy Management Approach in Electric Vehicle with Optimizing Electricity Consumption Cost Using Hybrid Method.” Energy & Environment 34 (0), https://doi.org/10.1177/0958305X221135020.
  • Vyncke, Thomas J., Rene K. Boel, and Jan A.A. Melkebeek. 2006. “Direct Torque Control of Permanent Magnet Synchronous Motors – An Overview.” 3rdIEEE Benelux Young Researchers Symposium in Electrical Power Engineering, Ghent, Belgium.
  • Wang, D., X. Wang, and S. Jung. 2013. “Cogging Torque Minimization and Torque Ripple Suppression in Surface-Mounted Permanent Magnet Synchronous Machines Using Different Magnet Widths.” IEEE Transactions on Magnetics 49 (5): 2295–2298. https://doi.org/10.1109/TMAG.2013.2242454.
  • Wang, L., Z. Q. Zhu, H. Bin, and L. Gong. 2021. “A Commutation Error Compensation Strategy for High-Speed Brushless DC Drive Based on Adaline Filter.” IEEE Transactions on Industrial Electronics 68 (5): 3728–3738. https://doi.org/10.1109/TIE.2020.2984445.
  • Wanjiku, J., M. A. Khan, P. S. Barendse, and P. Pillay. 2015. “Influence of Slot Openings and Tooth Profile on Cogging Torque in Axial-Flux PM Machines.” IEEE Transactions on Industrial Electronics 62 (12): 7578–7589. https://doi.org/10.1109/TIE.2015.2458959.
  • Wu, R., and G. R. Slemon. 1991. “A Permanent Magnet Motor Drive Without a Shaft Sensor.” IEEE Transactions on Industry Applications 27 (5): 1005–1011. https://doi.org/10.1109/28.90359.
  • Xia, K., Y. Ye, J. Ni, Y. Wang, and P. Xu. 2020. “Model Predictive Control Method of Torque Ripple Reduction for BLDC Motor.” IEEE Transactions on Magnetics 56 (1): 1–6. https://doi.org/10.1109/TMAG.2019.2950953.
  • Yang, L., Z. Q. Zhu, L. Gong, and H. Bin. 2021. “PWM Switching Delay Correction Method for High-Speed Brushless DC Drives.” IEEE Access 9: 81717–81727. https://doi.org/10.1109/ACCESS.2021.3085212.
  • Yuan, X., S. Zhang, and C. Zhang. 2019. “Enhanced Robust Deadbeat Predictive Current Control for PMSM Drives.” IEEE Access 7: 148218–148230. https://doi.org/10.1109/ACCESS.2019.2946972.
  • Zhang, H., and H. Li. 2021. “Fast Commutation Error Compensation Method of Sensorless Control for MSCMG BLDC Motor With Nonideal Back EMF.” IEEE Transactions on Power Electronics 36 (7): 8044–8054. https://doi.org/10.1109/TPEL.2020.3030777.
  • Zhang, C., H. Liu, S. Chen, and F. Wang. 2008. “Applications of Neural Networks for Permanent Magnet Synchronous Motor Direct Torque Control.” Journal of Systems Engineering and Electronics 19 (3): 555–561. https://doi.org/10.1016/S1004-4132(08)60120-6
  • Zhang, H., G. Liu, X. Zhou, and S. Zheng. 2021. “High-Precision Sensorless Optimal Commutation Deviation Correction Strategy of BLDC Motor With Asymmetric Back EMF.” IEEE Transactions on Industrial Informatics 17 (8): 5250–5259. https://doi.org/10.1109/TII.2020.3027010.
  • Zhao, D., X. Wang, B. Tan, L. Xu, C. Yuan, and Y. Huangfu. 2021a. “Fast Commutation Error Compensation for BLDC Motors Based on Virtual Neutral Voltage.” IEEE Transactions on Power Electronics 36 (2): 1259–1263. https://doi.org/10.1109/TPEL.2020.3006536.
  • Zhao, D., X. Wang, L. Xu, L. Xia, and Y. Huangfu. 2021b. “A New Phase-Delay-Free Commutation Method for BLDC Motors Based on Terminal Voltage.” IEEE Transactions on Power Electronics 36 (5): 4971–4976. https://doi.org/10.1109/TPEL.2020.3039887.
  • Zhongming, Y., and W. Bin. 2000. “A Review on Induction Motor Online Fault Diagnosis.” in Proceedings of the IPEMC Third International Power Electronics and Motion Control Conference (IEEE Cat. No.00EX435): 1353–1358. Beijing, China.
  • Zhou, X., X. Chen, C. Peng, and Y. Zhou. 2018. “High Performance NonsalientSensorless BLDC Motor Control Strategy from Standstill to High Speed.” IEEE Transactions on Industrial Informatics 14 (10): 4365–4375. https://doi.org/10.1109/TII.2018.2794461.
  • Zhou, X., Y. Zhou, C. Peng, F. Zeng, and X. Song. 2019. “Sensorless BLDC Motor Commutation Point Detection and Phase Deviation Correction Method.” IEEE Transactions on Power Electronics 34 (6): 5880–5892. https://doi.org/10.1109/TPEL.2018.2867615.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.