Computational fluid dynamics analysis on performance assessment of Darrieus-type vertical axis wind turbine using NACA0016, NACA0019 and NACA0020 airfoil sections

References

• Almohammadi, K. M., D. B. Ingham, L. Maa, and M. Pourkashan. 2013. “Computational Fluid Dynamics (CFD) Mesh Independency Techniques for a Straight Blade Vertical Axis Wind Turbine.” Energy 58: 483–493. https://doi.org/10.1016/j.energy.2013.06.012.
   Web of Science ®Google Scholar
• Bai, C.-J., Y.-Y. Lin, S.-Y. Linand, and W.-C. Wang. 2015. “Computational Fluid Dynamics Analysis of the Vertical Axis Wind Turbine Blade with Tubercle Leading Edge.” Journal of Renewable and Sustainable Energy 7 (033124): 1–15. https://doi.org/10.1063/1.4922192.
   Google Scholar
• Balduzzi, F., A. Bianchini, G. Ferrara, and L. Ferrari. 2016a. “Dimensionless Numbers for the Assessment of Mesh and Time Step Requirements in CFD Simulations of Darrieus Wind Turbines.” Energy 97: 246–261. https://doi.org/10.1016/j.energy.2015.12.111.
   Web of Science ®Google Scholar
• Balduzzi, F., A. Bianchini, R. Maleci, G. Ferrara, and L. Ferrari. 2016b. “Critical Issues in the CFD Simulation of Darrieus Wind Turbines.” Renewable Energy 85: 419–435. https://doi.org/10.1016/j.renene.2015.06.048.
   Web of Science ®Google Scholar
• Balduzzi, F., J. Drofelnik, A. Bianchini, G. Ferrara, L. Ferrari, and M. S. Campobasso. 2017. “Darrieus Wind Turbine Blade Unsteady Aerodynamics: A Three Dimensional Navier-Stokes CFD Assessment.” Energy 128: 550–563. https://doi.org/10.1016/j.energy.2017.04.017.
   Web of Science ®Google Scholar
• Bedon, G., S. D. Betta, and E. Benini. 2016. “Performance-Optimized Airfoil for Darrieus Wind Turbines.” Renewable Energy 94: 328–340. https://doi.org/10.1016/j.renene.2016.03.071.
   Web of Science ®Google Scholar
• Bianchini, A., F. Balduzzi, P. Bachant, G. Ferrara, and L. Ferrari. 2017. “Effectiveness of Two-Dimensional CFD Simulations for Darrieus VAWTs: A Combined Numerical and Experimental Assessment.” Energy Conversion and Management 136: 318–328. https://doi.org/10.1016/j.enconman.2017.01.026.
   Web of Science ®Google Scholar
• Bianchini, A., G. Ferrari, and L. Ferrari. 2015. “Pitch Optimization of Small Darrieus Wind Turbine.” Energy Procedia 81: 122–132. https://doi.org/10.1016/j.egypro.2015.12.067.
   Google Scholar
• Biswas, A., and R. Gupta. 2014. “Unsteady Aerodynamics of a Twist Bladed H-Darrieus Rotor in low Reynolds Number flow.” Journal of Renewable and Sustainable Energy 6 (033108): 1–12. https://doi.org/10.1063/1.4878995.
   Google Scholar
• Cai, X., Y. Zhang, W. Ding, and S. Bian. 2019. “The Aerodynamic Performance of H-Type Darrieus VAWT Rotor with and Without Winglets: CFD Simulations.” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1–12. https://doi.org/10.1080/15567036.2019.1691286.
   Web of Science ®Google Scholar
• Castelli, M. R., A. Englaro, and E. Benini. 2011. “The Darrieus Wind Turbine: Proposal for a New Performance Prediction Model Based on CFD.” Energy 36: 4919–4934. https://doi.org/10.1016/j.energy.2011.05.036.
   Web of Science ®Google Scholar
• Chen, W. H., C.-Y. Chen, C.-Y. Huang, and C.-J. Hwang. 2017. “Power Output Analysis and Optimization of Two Straight-Bladed Vertical-Axis Wind Turbines.” Applied Energy 185: 223–232. https://doi.org/10.1016/j.apenergy.2016.10.076.
   Web of Science ®Google Scholar
• Chowdhury, A. M., H. Akimoto, and Y. Hara. 2016. “Comparative CFD Analysis of Vertical Axis Wind Turbine in Upright and Tilted Configurations.” Renewable Energy 85:327–337. https://doi.org/10.1016/j.renene.2015.06.037.
   Web of Science ®Google Scholar
• Daroczy, L., G. Jaaniga, K. Petrasch, M. Webner, and D. Thevenin. 2015. “Comparative Analysis of Turbulence Models for the Aerodynamic Simulation of H-Darrieus Rotors.” Energy 90:680–690. https://doi.org/10.1016/j.energy.2015.07.102.
   Web of Science ®Google Scholar
• Daróczy, L., G. Janiga, and D. Thévenin. 2018. “Computational Fluid Dynamics Based Shape Optimization of Airfoil Geometry for an H-Rotor Using a Genetic Algorithm.” Engineering Optimization 50 (9): 1483–1499. https://doi.org/10.1080/0305215X.2017.1409350.
   Web of Science ®Google Scholar
• Debnath, B. K., A. Biswas, and R. Gupta. 2009. “Computational Fluid Dynamics Analysis of a Combined Three-Bucket Savonius and Three Bladed Darrieus Rotor at Various Overlap Conditions.” Journal of Renewable and Sustainable Energy 1 (033110): 1–14. https://doi.org/10.1063/1.3152431.
   Google Scholar
• Durrani, N., H. Hameed, H. Rahman, and S. R. Chaudhry. 2011, January 4–7. “A Detailed Aerodynamic Design and Analysis of a 2D Vertical Axis Wind Turbine Using Sliding Mesh in CFD.” 49th AIAA aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, Florida.
   Google Scholar
• Elkhoury, M., T. Kiwata, and E. Aoun. 2015. “Experimental and Numerical Investigation of a Three-Dimensional Vertical-Axis Wind Turbine with Variable-Pitch.” Journal of Wind Engineering and Industrial Aerodynamics 139:111–123. https://doi.org/10.1016/j.jweia.2015.01.004.
   Web of Science ®Google Scholar
• Franchina, N., G. Persico, and M. Savini. 2019. “2D-3D Computations of a Vertical Axis Wind Turbine Flow Field: Modeling Issues and Physical Interpretations.” Renewable Energy 136:1170–1189. https://doi.org/10.1016/j.renene.2018.09.086.
   Web of Science ®Google Scholar
• Guo, Y., X. Li, L. Sun, Y. Gao, Zh. Gao, and L. Chen. 2019. “Aerodynamic Analysis of a Step Adjustment Method for Blade Pitch of a VAWT.” Journal of Wind Engineering and Industrial Aerodynamics 188:90–101. https://doi.org/10.1016/j.jweia.2019.02.023.
   Web of Science ®Google Scholar
• Hashem, I., and M. H. Mohamed. 2018. “Aerodynamic Performance Enhancements of H-Rotor Darrieus Wind Turbine.” Energy 142:531–545. https://doi.org/10.1016/j.energy.2017.10.036.
   Web of Science ®Google Scholar
• Hoghooghi, H., N. Chokani, and R. S. Abhari. 2019. “Effectiveness of Individual Pitch Control on a 5 MW Downwind Turbine.” Renewable Energy 139: 435–446. https://doi.org/10.1016/j.renene.2019.02.088.
   Web of Science ®Google Scholar
• Howell, R., N. Qin, J. Edwards, and N. Durrani. 2010. “Wind Tunnel and Numerical Study of a Small Vertical Axis Wind Turbine.” Renewable Energy 35: 412–422. https://doi.org/10.1016/j.renene.2009.07.025.
   Web of Science ®Google Scholar
• Jin, X., G. Zhao, K. Gao, and W. Ju. 2015. “Darrieus Vertical Axis Wind Turbine: Basic Research Methods.” Renewable and Sustainable Energy Reviews 42:212–225. https://doi.org/10.1016/j.rser.2014.10.021.
   Web of Science ®Google Scholar
• Karmakar, S. D., and H. Chattopadhyay. 2022. “A Review of Augmentation Methods to Enhance the Performance of Vertical Axis Wind Turbine.” Sustainable Energy Technologies and Assessments 53:102469. https://doi.org/10.1016/j.seta.2022.102469.
   Web of Science ®Google Scholar
• Karmakar, S. D., S. M. Rahman, and H. Chattopadhyay. 2022. “Numerical Investigations on the Performance of Darrieus Vertical Axis Wind Turbine with NACA0017 Blade Profile.” Progress in Computational Fluid Dynamics. https://doi.org/10.1504/PCFD.2022.10048848.
   Web of Science ®Google Scholar
• Kavade, P. K., and P. M. Ghanegaonkar. 2018. “Optimization and Performance Analysis of Vertical Axis Wind Turbine with Blade Pitching at Best Position Angle for Different Tip Speed Ratios.” International Journal of Ambient Energy 41:783–792. https://doi.org/10.1080/01430750.2018.1492442.
   Web of Science ®Google Scholar
• Khan, T., M. I. Inam, and A. Al-Faruk. 2018. “Effect of Tip Speed Ratio on the Flow Characteristics of Single-Bladed Darrieus Wind Turbine.” International Conference on Mechanical, Industrial and Energy Engineering. 23–24 December, Khulna, Bangladesh.
   Google Scholar
• Kragic, I. M., D. Vucina, and Z. Milas. 2018. “Numerical Workflow for 3D Shape Optimization and Synthesis of Vertical-Axis Wind Turbines for Specified Operating Regimes.” Renewable Energy 115:113–127. https://doi.org/10.1016/j.renene.2017.08.030.
   Web of Science ®Google Scholar
• Lam, H. F., and H. Y. Peng. 2016. “Study of Wake Characteristics of a Vertical Axis Wind Turbine by Two- and Three-Dimensional Computational Fluid Dynamics Simulations.” Renewable Energy 90:386–398. https://doi.org/10.1016/j.renene.2016.01.011.
   Web of Science ®Google Scholar
• Lanzafame, R., S. Mauro, and M. Messina. 2014. “2D CFD Modeling of H-Darrieus Wind Turbines Using a Transition Turbulence Model.” Energy Procedia 45:131–140. https://doi.org/10.1016/j.egypro.2014.01.015.
   Google Scholar
• Lee, Y.-T., and H.-C. Lim. 2015. “Numerical Study of the Aerodynamic Performance of a 500 W Darrieus-Type Vertical-Axis Wind Turbine.” Renewable Energy 83:407–415. https://doi.org/10.1016/j.renene.2015.04.043.
   Web of Science ®Google Scholar
• Li, Q., T. Maeda, Y. Kamada, J. Murata, K. Furukawa, and M. Yamamoto. 2015. “Effect of Number of Blades on Aerodynamic Forces on a Straight-Bladed Vertical Axis Wind Turbine.” Energy 90:784–795. https://doi.org/10.1016/j.energy.2015.07.115.
   Web of Science ®Google Scholar
• Li, C., Y. Xiao, Y. Xu, Y. Peng, G. Hu, and S. Zhu. 2018. “Optimization of Blade Pitch in H-Rotor Vertical Axis Wind Turbines Through Computational Fluid Dynamics Simulations.” Applied Energy 212:1107–1125. https://doi.org/10.1016/j.apenergy.2017.12.035.
   Web of Science ®Google Scholar
• Mohamed, M. H. 2012. “Performance Investigation of H-Rotor Darrieus Turbine with New Airfoil Shapes.” Energy 47:522–530. https://doi.org/10.1016/j.energy.2012.08.044.
   Web of Science ®Google Scholar
• Mohamed, M. H. 2013. “Impacts of Solidity and Hybrid System in Small Wind Turbines Performance.” Energy 57:495–504. https://doi.org/10.1016/j.energy.2013.06.004.
   Web of Science ®Google Scholar
• Mohamed, M. H., A. M. Ali, and A. A. Hafiz. 2015. “CFD Analysis for H-Rotor Darrieus Turbine as a low Speed Wind Energy Converter.” Engineering Science and Technology, an International Journal 18:1–13. https://doi.org/10.1016/j.jestch.2014.08.002.
   Google Scholar
• Mohamed, M. H., A. Dessoky, and F. Alqurashi. 2019. “Blade Shape Effect on the Behavior of the H-Rotor Darrieus Wind Turbine: Performance Investigation and Force Analysis.” Energy 179:1217–1234. https://doi.org/10.1016/j.energy.2019.05.069.
   Web of Science ®Google Scholar
• Nobile, R., M. Vahdati, J. Barlow, and A. M. Crook. 2014. “Unsteady Flow Simulation of a Vertical Axis Augmented Wind Turbine: A Two-Dimensional Study.” Journal of Wind Engineering and Industrial Aerodynamics 125:168–179. https://doi.org/10.1016/j.jweia.2013.12.005.
   Web of Science ®Google Scholar
• Parakkal, J. U., Kh. El-Kadi, A. El-Sinawi, S. Elagroudy, and I. Janajreh. 2019. “Numerical Analysis of VAWT Wind Turbines: Joukowskivs Classical NACA Rotor’s Blades.” Energy Procedia 158:1194–1201. https://doi.org/10.1016/j.egypro.2019.01.306.
   Google Scholar
• Qin, N., R. Howell, N. Durrani, K. Hamada, and T. Smith. 2011. “Unsteady Flow Simulation and Dynamic Stall Behaviour of Vertical Axis Wind Turbine Blades.” Wind Engineering 35 (4): 511–510. https://doi.org/10.1260/0309-524X.35.4.511.
   Google Scholar
• Rahman, S. M., and H. Chattopadhyay. 2019. “Statistical Assessment of Wind Energy Potential for Power Generation at Imphal, Manipur (India).” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. 45:7376–7388. https://doi.org/10.1080/15567036.2019.1675814.
   Web of Science ®Google Scholar
• Rahman, S. M., and H. Chattopadhyay. 2020. “A new Approach to Estimate the Weibull Parameters for Wind Energy Assessment: Case Studies with Four Cities from the Northeast and East India.” International Transactions on Electrical Energy Systems 30. https://doi.org/10.1002/2050-7038.12574.
   Web of Science ®Google Scholar
• Rezaeiha, A., I. Kalkman, and B. Blocken. 2017. “CFD Simulation of a Vertical Axis Wind Turbine Operating at a Moderate tip Speed Ratio: Guidelines for Minimum Domain Size and Azimuthal Increment.” Renewable Energy 107:373–385. https://doi.org/10.1016/j.renene.2017.02.006.
   Web of Science ®Google Scholar
• Rezaeiha, A., H. Montazeri, and B. Blocken. 2019. “On the Accuracy of Turbulence Models for CFD Simulations of Vertical Axis Wind Turbines.” Energy 180:838–857. https://doi.org/10.1016/j.energy.2019.05.053.
   Web of Science ®Google Scholar
• Sagharichi, A., M. Zamani, and A. Ghasemi. 2018. “Effect of Solidity on the Performance of Variable- Pitch Vertical Axis Wind Turbine.” Energy 161:753–775. https://doi.org/10.1016/j.energy.2018.07.160.
   Web of Science ®Google Scholar
• Sengupta, A. R., A. Biswas, and R. Gupta. 2016. “Studies of Some High Solidity Symmetrical and Unsymmetrical Blade H-Darrieus Rotors with Respect to Starting Characteristics, Dynamic Performances and Flow Physics in low Wind Streams.” Renewable Energy 93:536–547. https://doi.org/10.1016/j.renene.2016.03.029.
   Web of Science ®Google Scholar
• Shukla, D. L., A. U. Mehta, and K. V. Modi. 2018. “Dynamic Overset 2D CFD Numerical Simulation of a Small Vertical Axis Wind Turbine.” International Journal of Ambient Energy 41:1415–1422. https://doi.org/10.1080/01430750.2018.1517674.
   Web of Science ®Google Scholar
• Siddiqui, M. S., N. Durrani, and I. Akhtar. 2015. “Quantification of the Effects of Geometric Approximations on the Performance of a Vertical Axis Wind Turbine.” Renewable Energy 74:661–670. https://doi.org/10.1016/j.renene.2014.08.068.
   Web of Science ®Google Scholar
• Tescione, G., D. Ragni, C. He, C. J. S. Ferreira, and G. J. W. van Bussel. 2014. “Near Wake Flow Analysis of a Vertical Axis Wind Turbine by Stereoscopic Particle Image Velocimetry.” Renewable Energy 70:47–61. https://doi.org/10.1016/j.renene.2014.02.042.
   Web of Science ®Google Scholar
• Tjiu, W., T. Marnoto, S. Mat, M. H. Ruslan, and K. Sopian. 2015. “Darrieus Vertical Axis Wind Turbine for Power Generation II: Challenges in HAWT and the Opportunity of Multi-Megawatt Darrieus VAWT Development.” Renewable Energy 75:560–571. https://doi.org/10.1016/j.renene.2014.10.039.
   Web of Science ®Google Scholar
• Xiao, X., and S. Joshi. 2020. “Process Planning for Five-Axis Support Free Additive Manufacturing.” Additive Manufacturing 36:101569. https://doi.org/10.1016/j.addma.2020.101569.
   Web of Science ®Google Scholar
• Xiao, X., S. Joshi, and J. Cecil. 2021. “Critical Assessment of Shape Retrieval Tools (SRTs).” The International Journal of Advanced Manufacturing Technology 116 (11): 3431–3446. https://doi.org/10.1007/s00170-021-07681-4.
   Web of Science ®Google Scholar
• Xiao, X., B.-M. Roh, and C. Hamilton. 2022. “Porosity Management and Control in Powder bed Fusion Process Through Process-Quality Interactions.” CIRP Journal of Manufacturing Science and Technology 38: 120–128. https://doi.org/10.1016/j.cirpj.2022.04.005.
   Web of Science ®Google Scholar
• Xiao, X., B.-M. Roh, and F. Zhu. 2021. “Strength Enhancement in Fused Filament Fabrication via the Isotropy Toolpath.” Applied Sciences 11 (13): 1–14. https://doi.org/10.3390/app11136100.
   Google Scholar
• Xiao, X., C. Waddell, C. Hamilton, and H. Xiao. 2022. “Quality Prediction and Control in Wire Arc Additive Manufacturing via Novel Machine Learning Framework.” Micromachines 13 (1): 137. https://doi.org/10.3390/mi13010137.
   PubMed Web of Science ®Google Scholar