The mechanical behavior of modified epoxy adhesive using GNPs, MWCNTs, and RGO nanomaterials

References

• Ma PC, Siddiqui NA, Marom G, et al. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review. Compos A Appl Sci Manufact. 2010;41(10):1345–1367. doi: 10.1016/j.compositesa.2010.07.003.
   Web of Science ®Google Scholar
• Hu K, Kulkarni DD, Choi I, et al. Graphene-polymer nanocomposites for structural and functional applications. Prog Polym Sci. 2014;39(11):1934–1972. doi: 10.1016/j.progpolymsci.2014.03.001.
   Web of Science ®Google Scholar
• Fatima I, Ejaz H, Nigar M, et al. Correlation between toughness and metal volume fraction in carbon-glass fiber laminates tested under tensile loading. Compos Interfaces. 2023;30(10):1085–1098. doi: 10.1080/09276440.2023.2189352.
   Web of Science ®Google Scholar
• Wei C, Akinwolemiwa B, Yu L, et al. Polymer composites with functionalized carbon nanotube and graphene. Polymer composites with functionalized. Nanoparticles. Amsterdam, Netherlands: Elsevier; 2019. p. 211–248.
   Google Scholar
• Chong H, Hinder S, Taylor A. Graphene nanoplatelet-modified epoxy: effect of aspect ratio and surface functionality on mechanical properties and toughening mechanisms. J Mater Sci. 2016;51(19):8764–8790. doi: 10.1007/s10853-016-0160-9.
   Web of Science ®Google Scholar
• Bagheri R, Marouf B, Pearson R. “Rubber-toughened epoxies: a critical review,” journal of macromolecular science®, part C. Polym Rev. 2009;49(3):201–225. doi: 10.1080/15583720903048227.
   Web of Science ®Google Scholar
• Sprenger S. Epoxy resins modified with elastomers and surface-modified silica nanoparticles. Polymer. 2013;54(18):4790–4797. doi: 10.1016/j.polymer.2013.06.011.
   Web of Science ®Google Scholar
• Ejaz H, Mubashar A, Uddin E, et al. An experimental and simulation study of RGO effects on mechanical behaviour of structural adhesive and lap shear joints strength. Int J Adhes Adhes. 2023;126:103480. doi: 10.1016/j.ijadhadh.2023.103480.
   Web of Science ®Google Scholar
• Bonaccorso F, Sun Z, Hasan T, et al. Graphene photonics and optoelectronics. Nat Photon. 2010;4(9):611–622. doi: 10.1038/nphoton.2010.186.
   Web of Science ®Google Scholar
• Peres NM. Colloquium: the transport properties of graphene: an introduction. Rev Mod Phys. 2010;82(3):2673–2700. doi: 10.1103/RevModPhys.82.2673.
   Web of Science ®Google Scholar
• Wernik J, Meguid S. On the mechanical characterization of carbon nanotube reinforced epoxy adhesives. Mater Design. 2014;59:19–32. doi: 10.1016/j.matdes.2014.02.034.
   Web of Science ®Google Scholar
• Soltannia B, Taheri F. Influence of nano-reinforcement on the mechanical behavior of adhesively bonded single-lap joints subjected to static, quasi-static, and impact loading. J Adhes Sci Technol. 2015;29(5):424–442. doi: 10.1080/01694243.2014.991060.
   Web of Science ®Google Scholar
• Wehnert F, Langer M, Kaspar J, et al. Design of multifunctional adhesives by the use of carbon nanoparticles. J Adhes Sci Technol. 2015;29(17):1849–1859. doi: 10.1080/01694243.2015.1014536.
   Web of Science ®Google Scholar
• Mohamed M, Taheri F. Influence of graphene nanoplatelets (GNPs) on mode I fracture toughness of an epoxy adhesive under thermal fatigue. J Adhes Sci Technol. 2017;31(19–20):2105–2123. doi: 10.1080/01694243.2016.1264659.
   Web of Science ®Google Scholar
• Wang S, Cao M, Cong F, et al. Mechanical and thermal properties of graphene and carbon nanotube reinforced epoxy/boron nitride adhesives. J Adhes Sci Technol. 2021;35(19):2142–2158. doi: 10.1080/01694243.2021.1877017.
   Web of Science ®Google Scholar
• Borghei H, Behjat B, Yazdani M. Effect of adhesive and nanocomposite layers on lap shear strength of layup bonded joints. J Adhes Sci Technol. 2022;36(7):731–747. doi: 10.1080/01694243.2021.1936384.
   Web of Science ®Google Scholar
• Obaid AN, Al-Bermany E. Performance of functionalized graphene oxide to improve anti-corrosion of epoxy coating on 2024-T3 aluminium alloy. Mater Chem Phys. 2023;305:127849. doi: 10.1016/j.matchemphys.2023.127849.
   Web of Science ®Google Scholar
• Ramezanzadeh M, Ramezanzadeh B, Sari MG, et al. Corrosion resistance of epoxy coating on mild steel through polyamidoamine dendrimer-covalently functionalized graphene oxide nanosheets. J Ind Eng Chem. 2020;82:290–302. doi: 10.1016/j.jiec.2019.10.025.
   Web of Science ®Google Scholar
• Anusha P, Sri MNS, Vijayakumar S, et al. Design and optimization the wear characteristics for Al7178/TiO2/B4C/FA Central hybrid composite. Int J Interact Des Manuf. 2023;1–9. doi: 10.1007/s12008-023-01341-5.
   Google Scholar
• Young RJ, Kinloch IA, Gong L, et al. The mechanics of graphene nanocomposites: a review. Compos Sci Technol. 2012;72(12):1459–1476. doi: 10.1016/j.compscitech.2012.05.005.
   Web of Science ®Google Scholar
• Potts JR, Dreyer DR, Bielawski CW, et al. Graphene-based polymer nanocomposites. Polymer. 2011;52(1):5–25. doi: 10.1016/j.polymer.2010.11.042.
   Web of Science ®Google Scholar
• Kim H, Abdala AA, Macosko CW. Graphene/polymer nanocomposites. Macromolecules. 2010;43(16):6515–6530. doi: 10.1021/ma100572e.
   Web of Science ®Google Scholar
• Rafiee MA, Rafiee J, Wang Z, et al. Enhanced mechanical properties of nanocomposites at low graphene content. ACS Nano. 2009;3(12):3884–3890. doi: 10.1021/nn9010472.
   PubMed Web of Science ®Google Scholar
• Chatterjee S, Nafezarefi F, Tai N, et al. Size and synergy effects of nanofiller hybrids including graphene nanoplatelets and carbon nanotubes in mechanical properties of epoxy composites. Carbon. 2012;50(15):5380–5386. doi: 10.1016/j.carbon.2012.07.021.
   Web of Science ®Google Scholar
• Liu Q, Zhou X, Fan X, et al. Mechanical and thermal properties of epoxy resin nanocomposites reinforced with graphene oxide. Polym-Plast Technol Eng. 2012;51(3):251–256. doi: 10.1080/03602559.2011.625381.
   Web of Science ®Google Scholar
• Ramos-Galicia L, Mendez LN, Martínez-Hernández AL, et al. Improved performance of an epoxy matrix as a result of combining graphene oxide and reduced graphene. Int J Polym Sci. 2013;2013:1–7. doi: 10.1155/2013/493147.
   Web of Science ®Google Scholar
• Salom C, Prolongo M, Toribio A, et al. Mechanical properties and adhesive behavior of epoxy-graphene nanocomposites. Int J Adhes Adhes. 2018;84:119–125. doi: 10.1016/j.ijadhadh.2017.12.004.
   Web of Science ®Google Scholar
• Ahmadi-Moghadam B, Sharafimasooleh M, Shadlou S, et al. Effect of functionalization of graphene nanoplatelets on the mechanical response of graphene/epoxy composites. Mater Design (1980–2015). 2015;66:142–149. doi: 10.1016/j.matdes.2014.10.047.
   Web of Science ®Google Scholar
• Konstantakopoulou M, Kotsikos G. Effect of MWCNT filled epoxy adhesives on the quality of adhesively bonded joints. Plastic Rubber Compos. 2016;45(4):166–172. doi: 10.1080/14658011.2016.1165788.
   Web of Science ®Google Scholar
• Khoramishad H, Ebrahimijamal M, Fasihi M. The effect of graphene oxide nano‐platelets on fracture behavior of adhesively bonded joints. Fatigue Fract Eng Mat Struct. 2017;40(11):1905–1916. doi: 10.1111/ffe.12612.
   Web of Science ®Google Scholar
• Ejaz H, Mubashar A, Uddin E, et al. Influence of MWCNTs on strength properties of high viscous epoxy adhesive and fracture behavior of adhesively bonded joints. Theor Appl Fract Mech. 2022;120:103412. doi: 10.1016/j.tafmec.2022.103412.
   Web of Science ®Google Scholar
• Ejaz H, Mubashar A, Uddin E, et al. Effect of functionalised and non-functionalised GNPs addition on strength properties of high viscous epoxy adhesive and lap shear joints. Polym Test. 2022;113:107680. doi: 10.1016/j.polymertesting.2022.107680.
   Web of Science ®Google Scholar
• Yasmin A, Daniel IM. Mechanical and thermal properties of graphite platelet/epoxy composites. Polymer. 2004;45(24):8211–8219. doi: 10.1016/j.polymer.2004.09.054.
   Web of Science ®Google Scholar