GMAW process with rotating electrode: an advanced alternative to improve cladding performance

References

• Guo J. Special issue on ‘recent advances in corrosion protection of metallic materials. J Adhesion Sci Technol. 2022;36(23–24):2479–2481. doi: 10.1080/01694243.2022.2115251.
   Web of Science ®Google Scholar
• He K, Dong L, Wang Q, et al. Comparison on the microstructure and corrosion behavior of inconel 625 cladding deposited by tungsten inert gas and cold metal transfer process. Surf Coat Technol. 2022;435:128245. doi: 10.1016/j.surfcoat.2022.128245.
   Web of Science ®Google Scholar
• Matias JVS, Lourenço MJC, Jorge JCF, et al. Behavior of a superaustenitic stainless steel weld cladding deposited by the gas metal arc welding process. Mater Today Com. 2023;34:104978. doi: 10.1016/j.mtcomm.2022.104978.
   Web of Science ®Google Scholar
• An Q, Fan KY, Ge YF, et al. Microstructure and mechanical properties of stainless steel clad plate joints produced by TIG and MAG hybrid welding. J Adhesion Sci Technol. 2020;34(6):670–685. doi: 10.1080/01694243.2019.1677087.
   Web of Science ®Google Scholar
• Evangeline A, Sathiya P. Dissimilar cladding of ni–cr–mo super alloy over 316L austenitic stainless steel: morphologies and mechanical properties. Met Mater Int. 2021;27(5):1155–1172. doi: 10.1007/s12540-019-00440-x.
   Web of Science ®Google Scholar
• Singhal TS, Jain JK. GMAW cladding on metals to impart anti-corrosiveness: machine, processes, and materials. Mater Today Proc. 2020;26(2):2432–2441. doi: 10.1016/j.matpr.2020.02.518.
   Google Scholar
• Jorge JCF, Meira OG, Madalena FCA, et al. Evaluation of the AISI 904L alloy weld overlays obtained by GMAW and electro-slag welding processes. J Mater Eng Perform. 2017;26(5):2204–2212. doi: 10.1007/s11665-017-2631-9.
   Web of Science ®Google Scholar
• Jorge JCF, Souza LFG, Farneze HN, et al. Microstructural evolution of superaustenitic stainless steel weld metal subjected to post welding heat treatment. Mater Lett. 2023;344:134476. doi: 10.1016/j.matlet.2023.134476.
   Web of Science ®Google Scholar
• Mota CAM, Nascimento AS, Garcia DN, et al. Nickel overlay deposited by MIG welding and cold wire MIG welding. Weld Int. 2018;32(9):588–598. doi: 10.1080/09507116.2017.1347333.
   Google Scholar
• Norsok Standard. M-601, welding and inspection of piping, rev.4. Oslo, Norway, 2004, Standards Norway
   Google Scholar
• Rutzinger B. Influence of the welding process to the dilution rate of weld overlays on unalloyed steel using the weld consumable ERNiCrMo-3 (alloy 625). Biul Inst Spawalnictwa. 2014;5:72–75.
   Google Scholar
• Alvaraes CP, Sandes SS, Jorge JCF, et al. Microstructural characterization of inconel 625 nickel-based alloy weld cladding obtained by electroslag welding process. J Mater Eng Perform. 2020;29(5):3004–3015. doi: 10.1007/s11665-020-04861-3.
   Web of Science ®Google Scholar
• Evangeline A, Sathiya P. Structure-property relationships of inconel 625 cladding on AISI 316L substrate produced by hot wire (HW) TIG metal deposition technique. Mater Res Express. 2019;6(10):106539. doi: 10.1088/2053-1591/ab350f.
   Web of Science ®Google Scholar
• Rozmus-Gornikowska M, Blicharski M, Kusiński J. Influence of weld overlaying methods on microstructure and chemical composition of inconel 625 boiler pipe coatings. km. 2021;52(03):141–147. doi: 10.4149/km_2014_3_141.
   Web of Science ®Google Scholar
• Matias JVS, Lourenço MJC, Jorge JCF, et al. Microstructure and corrosion properties of the AISI 904L weld cladding obtained by the electro slag process. J Mater Res Technol. 2021;15:5151–5164. doi: 10.1016/j.jmrt.2021.10.094.
   Google Scholar
• Abioye TE, McCartney DG, Clare AT. Laser cladding of inconel 625 wire for corrosion protection. J Mater Proces Technol. 2015;217:232–240. doi: 10.1016/j.jmatprotec.2014.10.024.
   Web of Science ®Google Scholar
• Posch G, Scherleitner W, Rutzinger B, et al. Manufacturing of nickel base-overlays: comparison of various welding technologies under consideration of clad properties. In Conference: IIW International Congress IC 2014. New Delhi, India, April, 2014.
   Google Scholar
• Funderburk S. SpinArc™ welding system explained. Weld J. 2015;94(6):34–37.
   Web of Science ®Google Scholar
• Silva RHG, Silva RGN, Dornelles JM, et al. Development and evaluation of the internal cladding process of API 5L X70 risers with nickel-based superalloy 625 via PTA welding. Matéria. 2021;26(1):1–11. doi: 10.1590/S1517-707620210001.1249.
   Web of Science ®Google Scholar
• Scendo M, Staszewska-Samson K, Danielewski H. Corrosion behavior of inconel 625 coating produced by laser cladding. Coatings. 2021;11(7):759. doi: 10.3390/coatings11070759.
   Web of Science ®Google Scholar
• Mahapatra S, Laha A, Dey A, et al. An overview on weld cladding. Int J Sci Eng Res. 2016;7(4):194–203.
   Google Scholar
• Silveira GMS, Jorge JCF, Souza LFG, et al. Microstructural characterization and mechanical properties of high-strength steel weld metals obtained by GMAW process with rotating electrode (GMAW-RE). J Braz Soc Mech Sci Eng. 2021;43(4):221. doi: 10.1007/s40430-021-02932-7.
   Web of Science ®Google Scholar
• Silveira GMS, Filho WAS, Costa JFM, et al. Influence of rotation frequency and rotation diameter on mechanical properties and microstructure of weld metal produced by MCAW-RE. Int J Adv Manuf Technol. 2020;110(7-8):1789–1803. doi: 10.1007/s00170-020-05961-z.
   Web of Science ®Google Scholar
• Sankar N, Malarvizhi S, Balasubramanian V, et al. Effect of rotating arc (spin arc) on mechanical properties and microstructural characteristics of gas metal arc welded armour steel joints. Trans Indian Inst Met. 2022;75(12):3047–3059. doi: 10.1007/s12666-022-02679-2.
   Web of Science ®Google Scholar
• Zhang H, Chang Q, Liu J, et al. A novel rotating wire GMAW process to change fusion zone shape and microstructure of mild steel. Mater Lett. 2014;123:101–103. doi: 10.1016/j.matlet.2014.03.018.
   Web of Science ®Google Scholar
• American Welding Society. Specification for bare stainless steel welding electrodes and rods. AWS A5.9/A5.9M:2006, 2006.
   Google Scholar
• Araujo FPD, Mainier FB, Almeida BB. Evaluation of Ni-Cr-Mo alloy applied by weld overlay cladding on carbon steel for use in NaCl 3.5% mass solution. Proc Eng Sci. 2021;3(3):355–364. doi: 10.24874/PES03.03.011.
   Google Scholar
• Mougo AL, Neto FMAB, Garcia DN, et al. Effect of a cold wire on the metallurgical characteristics of nickel-based welds deposited by GMAW-CW. Trans Indian Inst Met. 2020;73(10):2425–2434. doi: 10.1007/s12666-020-02068-7.
   Web of Science ®Google Scholar
• Najafi M, Moshkbar Bakhshayesh M, Farzadi A. Microstructure and phase analysis of multilayer Ni-Cr-Mo clad for corrosion protection. Trans Indian Inst Met. 2021;74(7):1663–1672. doi: 10.1007/s12666-021-02256-z.
   Web of Science ®Google Scholar
• Anburaj J, Chandrasekar A, Nazirudeen SSM, et al. Effect of solution annealing on structure and properties of high mo superaustenitic stainless steel castings. Int J Cast Met Res. 2012;25(5):287–295. doi: 10.1179/1743133612Y.0000000006.
   Web of Science ®Google Scholar
• Koutsoukis T, Redjaïmia A, Fourlaris G. Characterization of precipitation sequences in superaustenitic stainless steels. SSP. 2011;(172-174)::493–498. doi: 10.4028/www.scientific.net/SSP.172-174.493.
   Google Scholar
• Balakrishnan M, Anburaj J, Mohamed Nazirudeen SS, et al. Influence of intermetallic precipitates on pitting corrosion of high mo superaustenitic stainless steel. Trans Indian Inst Met. 2015;68(S2):267–279. doi: 10.1007/s12666-015-0587-8.
   Web of Science ®Google Scholar
• Lee C, Lee Y, Lee C, et al. Precipitation behavior of the sigma phase with ni and mn content variations in superaustenitic stainless steel weld metal. Mater Charact. 2018;144:148–154. doi: 10.1016/j.matchar.2018.07.006.
   Web of Science ®Google Scholar
• Lee C, Lee Y, Lee C, et al. Possibility of mn substitution of ni through evaluation of mechanical properties and corrosion resistance in superaustenitic stainless steel weld metal. Mater Sci Eng A. 2018;733:16–23. doi: 10.1016/j.msea.2018.07.034.
   Web of Science ®Google Scholar
• Sathiya P, Aravindan S, Atjith PM, et al. Microstructural characteristics on bead on plate welding of AISI, 904L super austenitic stainless steel using gas metal arc welding process. Int J Eng Sci Technol. 2010;2(6):189–199.
   Google Scholar
• Kim SJ, Hong SG, Oh M. Effect of metallurgical factors on the pitting corrosion behavior of super austenitic stainless steel weld in an acidic chloride environment. J Mater Res. 2017;32(07):1343–1350. doi: 10.1557/jmr.2017.65.
   Web of Science ®Google Scholar
• Barbosa BARS, Tavares SSM, Cobuci A, et al. Influence of microstructure on pitting corrosion resistance of alloy 904L superaustenitic stainless steel. Corr. 2012;68(8):739–746. doi: 10.5006/0534.
   Web of Science ®Google Scholar
• Nouri M, Abdollah-Zadeh A, Malek F. Effect of welding parameters on dilution and weld bead geometry in cladding. J Mater Sci Technol. 2007;23(06):817–822. https://www.jmst.org/EN/Y2007/V23/I06/817
   Google Scholar
• Sathiya P, Mishra MK, Shanmugarajan B. Effect of shielding gases on microstructure and mechanical properties of super austenitic stainless steel by hybrid welding. Mater Des. 2012;33:203–212. doi: 10.1016/j.matdes.2011.06.065.
   Web of Science ®Google Scholar
• Cai X, Lin S, Murphy AB, et al. Influence of helium content on a ternary-gas-shielded GMAW process. Weld World. 2018;62(5):973–984. doi: 10.1007/s40194-018-0631-5.
   Web of Science ®Google Scholar
• Roshan R, Naik AK, Saxena KK, et al. Effect of welding speed and wire feed rate on arc characteristics, weld bead and microstructure in standard and pulsed gas metal arc welding. J Adhesion Sci Technolol. 2023;37:1–18. doi: 10.1080/01694243.2023.2192314.
   Web of Science ®Google Scholar
• Tabaie S, Greene T, Benoit MJ. Optimization of GMAW process parameters for weld overlay of inconel 686 superalloy on low-carbon steel. Int J Adv Manuf Technol. 2023;127(9-10):4769–4788. doi: 10.1007/s00170-023-11798-z.
   Web of Science ®Google Scholar