Preparation and frictional characteristics of solid lubrication coating on CFRP surface

References

• Devitte C, Souza AJ, Amorim HJ. Assessment of the GFRP/Ti hybrid stack drilling under high-speed cutting and cooled-compressed air. Appl Compos Mater. 2023:1–21. doi:10.1007/s10443-023-10144-6
   Web of Science ®Google Scholar
• Ding G, Yan X, Gao X, et al. Experimental and numerical studies on fatigue characteristics of CFRP shaft tube. Appl Sci. 2022;12(18):8933. doi:10.3390/app12188933
   Google Scholar
• Wei B, Yi X, Xiong Y, et al. The preparation and characterization of a carbon fiber-reinforced epoxy resin and EPDM composite using the co-curing method. RSC Adv. 2020;10(35):20588–20594. doi:10.1039/D0RA02263B
   PubMed Web of Science ®Google Scholar
• Zhang M, Liu B, Luan Y, et al. Nano-level insights on the interfacial wettability of graphene oxide-coated carbon fiber/epoxy composite. J Mater Sci. 2023;58(21):8815–8832. doi:10.1007/s10853-023-08589-y
   Web of Science ®Google Scholar
• Rubino F, Nisticò A, Tucci F, et al. Marine application of fiber reinforced composites: a review. J Mar Sci Eng. 2020;8(1):26, doi:10.3390/jmse8010026
   Web of Science ®Google Scholar
• Semmler C, Gyoktepeliler-Akin E, Killinger A. Plasma sprayed ceramic coatings for the thermal protection of carbon fiber reinforced plastics (CFRP): thermal and mechanical properties of YSZ, aluminum titanate, cordierite and mullite coatings. Surf Coat Technol. 2023;462:129509. doi:10.1016/j.surfcoat.2023.129509
   Web of Science ®Google Scholar
• Ye H, Wu C, Liu D, et al. Friction and wear behavior of CFRP plate in contact with roughened mould steel under high normal pressure. Constr Build Mater. 2019;220:308–319. doi:10.1016/j.conbuildmat.2019.06.007
   Web of Science ®Google Scholar
• Wang R, Xiong Y, Yang K, et al. Advanced progress on the significant influences of multi-dimensional nanofillers on the tribological performance of coatings. RSC Adv. 2023;13(29):19981–20022. doi:10.1039/D3RA01550E
   PubMed Web of Science ®Google Scholar
• Qin K, Feng Q, Li H, et al. General situation of solid lubricant coatings. EES. 2020;508(1):012219. doi:10.1088/1755-1315/508/1/012219
   Google Scholar
• Md. Ghazazi NA, Liza S, Ishimatsu J, et al. Effect of pulse current on surface properties of aluminum oxide coating containing graphite. Surf Interface Anal. 2023. doi:10.1002/sia.7249
   Web of Science ®Google Scholar
• Moskalewicz, T.; Warcaba, M.; Hadzhieva, Z.; et al. Influence of Si3N4 and CuO nanoparticles on the microstructure and properties of multiphase graphite oxide/hydroxyapatite/sodium alginate coatings obtained By electrophoretic deposition on titanium alloy. J Electrochem Soc. 2022, 169 (9). doi:10.1149/1945-7111/ac9340
   Web of Science ®Google Scholar
• Babuska TF, Curry JF, Dugger MT, et al. Role of environment on the shear-induced structural evolution of MoS2 and impact on oxidation and tribological properties for space applications. ACS Appl Mater Interfaces. 2022;14(11):13914–13924. doi:10.1021/acsami.1c24931
   PubMed Web of Science ®Google Scholar
• Ramezani A, Seyfi J, Razavi Aghjeh MK, et al. Poly(vinylidene fluoride)/molybdenum disulfide nanocomposite coatings: Studying the surface properties and corrosion protection. Polym Compos. 2022;43(12):8974–8985. doi:10.1002/pc.27077
   Web of Science ®Google Scholar
• Cao D, Lv K, Bao Y, et al. Thickness effect of an alumina–zirconia–mullite composite coating on the properties of zirconia. RSC Adv. 2023;13(4):2736–2744. doi:10.1039/D2RA07549K
   PubMed Web of Science ®Google Scholar
• Mohammed Thalib Basha G, Srikanth A, Venkateshwarlu B. Effect of reinforcement of carbon nanotubes on air plasma sprayed conventional Al2O3-3%TiO2 ceramic coatings. Mater Today: Proc. 2020;20:191–194. doi:10.1016/j.matpr.2019.11.025
   Google Scholar
• Thalib Basha GM, Srikanth A, Venkateshwarlu B. A critical review on nano structured coatings for alumina-titania (Al2O3-TiO2) deposited by Air plasma spraying process (APS). Mater Today: Proc. 2020;22:1554–1562. doi:10.1016/j.matpr.2020.02.117
   Google Scholar
• Lu L, Ma Z, Wang F-C, et al. Friction and wear behaviors of Al2O3–13 wt%TiO2 coatings. Rare Met. 2013;32(1):87–92. doi:10.1007/s12598-013-0008-2
   Web of Science ®Google Scholar
• Da B, Jiahong L, Yongwu Z, et al. Investigation of tribological and corrosion properties in ceramic/PTFE coating. Surf Eng. 2022;38(5):520–528. doi:10.1080/02670844.2022.2102836
   Web of Science ®Google Scholar
• Kuang S, Zhou F, Liu W, et al. Al2O3/MC particles reinforced MoFeCrTiWNbxhigh-entropy-alloy coatings prepared by laser cladding. Surf Eng. 2022;38(2):158–165. doi:10.1080/02670844.2022.2067730
   Web of Science ®Google Scholar
• Pan X, Qiu L, Hu X, et al. Corrosion and wear properties of Cr coating and ZrO2/Cr bilayer coating on Zr-4 alloy. Coatings. 2022;12(9):1281. doi:10.3390/coatings12091281
   Web of Science ®Google Scholar
• Hou X, Bai P, Li J, et al. MoS2 reinforced PEEK composite for improved aqueous boundary lubrication. Friction. 2023;11(9):1660–1672. doi:10.1007/s40544-022-0673-y
   Web of Science ®Google Scholar
• Du P, Liu C, Hu H, et al. Study of the tribological properties of HVOF-sprayed Ni-based coatings on Ti6Al4 V titanium alloys. Coatings. 2022;12(12):1977. doi:10.3390/coatings12121977
   Web of Science ®Google Scholar
• Kumar JJ, Satyanarayana VV, Reddy GS, et al. Effect of Al2TiO5 powder coating on the tribological, corrosion and mechanical properties of AISI 316L stainless steel. Mater Res Express. 2023;10(066511):2053–1591. doi:10.66511.1088/2053-1591/acda7d
   Google Scholar
• Liu N, Zhou Q, Xu M, et al. Evolution in microstructure, properties of the laser cladding CoCrFeMoNi coatings at different annealing temperatures. Mater Sci Technol. 2023;1-10. doi:10.1080/02670836.2023.2225904
   Google Scholar
• Zhou Y, Xu L, Zheng H, et al. Surface modification of plasma spraying Al2O3–13 wt% TiO2 coating by laser remelting technique. Mater Res Express. 2022;9(5):056401. doi:10.1088/2053-150564011/ac6a49
   Web of Science ®Google Scholar
• Jibran W, Wanjara P, Gholipour Baradari J, et al. Localised surface modification of high-strength aluminium–alumina metal matrix composite coatings using cold spraying and friction stir processing. Adv Appl Ceram. 2023;1-16. doi:10.1080/17436753.2023.2227446
   Google Scholar
• Lakshmi RV, Sampath S, Aruna ST. Silica-alumina based sol-gel coating containing cerium oxide nanofibers as a potent alternative to conversion coating for AA2024 alloy. Surf Coat Technol. 2021;411:127007. doi:10.1016/j.surfcoat.2021.127007
   Web of Science ®Google Scholar
• Li G, Xu H, Wan H, et al. Tribological properties and corrosion resistance of epoxy resin-polytetrafluoroethylene bonded solid lubricating coating filled with flake aluminum. J Appl Polym Sci. 2021;138(39):51003. doi:10.1002/app.51003
   Web of Science ®Google Scholar
• Rodriguez DJ, Edgar AS, Williams DJ, et al. Chemical solution deposition of protective Er2O3 and Y2O3coatings onto stainless steel for molten metal casting using metal-nitrate precursors. ACS Appl Mater Interfaces. 2023;15(23):28649–28663. doi:10.1021/acsami.3c05186
   PubMed Web of Science ®Google Scholar
• Chen X, Zhang Y, Li C, et al. Wear properties of C-MoS2-PTFE composite coating prepared on 4032 aluminum alloy. Lubricants. 2022;10(8):181. doi:10.3390/lubricants10080181
   Web of Science ®Google Scholar
• Zhao Z, Ma Y, Ju P, et al. Improved wear resistance and environmental adaptability of a polysiloxane/molybdenum disulfide composite lubricating coating using polyhedral oligomeric silsesquioxane. ACS Appl Mater Interfaces. 2022;14(31):36105–36115. doi:10.1021/acsami.2c08485
   PubMed Web of Science ®Google Scholar
• Akbarzadeh E, Picas JA, Baile MT. Orthogonal experimental design applied for wear characterization of aluminum/Csf metal composite fabricated by the thixomixing method. Int J Mater Form. 2016;9(5):601–612. doi:10.1007/s12289-015-1246-7
   Web of Science ®Google Scholar
• Shi-Cheng L, Ze-Zhong C, Jie Z, et al. Smooth particle hydrodynamics simulation of micro-Cup-extrusion using a graphit-ic coating. Adv Mater Sci Eng. 2014;2014:1–6. doi:10.1155/2014/863028
   Web of Science ®Google Scholar
• Kong N, Wei B, Li D, et al. A study on the tribological property of MoS2/Ti–MoS2/Si multilayer nanocomposite coating deposited by magnetron sputtering. RSC Adv. 2020;10(16):9633–9642. doi:10.1039/D0RA01074J
   PubMed Web of Science ®Google Scholar