Complex TiC-Ni-based composites joined to steel support by thermal explosion under load: synthesis, microstructure and tribological behavior

References

• Orrù R, Licheri R, Locci AM, et al. Consolidation/Synthesis of materials by electric current activated/assisted sintering. Mat Sci Eng R. 2009;63(4–6):127–287. doi: 10.1016/j.mser.2008.09.003
   Web of Science ®Google Scholar
• Darihaki F, Balak Z, Eatemadi R. Effect of nano and micro SiC particles on the microstructure and fracture toughness of ZrB2-SiC nanocomposite produced by SPS method. Mater Res Express. 2019;6(9):095608. doi: 10.1088/2053-1591/ab2e45
   Web of Science ®Google Scholar
• Balak Z. Shrinkage, hardness and fracture toughness of ternary ZrB2–SiC-HfB2 composite with different amount of HfB2. Mater Chem Phys. 2019;235:121706. doi: 10.1016/j.matchemphys.2019.05.094
   Web of Science ®Google Scholar
• Mukasyan AS, Moskovskikh DO, Nepapushev AA, et al. Ceramics from self-sustained reactions: recent advances. J Eur Ceram Soc. 2020;4:2512–2526. doi: 10.1016/j.jeurceramsoc.2019.12.028
   Google Scholar
• Pribytkov GA, Firsina IA, Korzhova V, et al. Synthesis of TiC–NiCrBSi binder alloy composite powders for cladding and deposition of wear resistant coatings. Russ J Non-Ferr Met+. 2019;60:282–289. doi: 10.3103/S1067821219030118
   Web of Science ®Google Scholar
• Boudebane S, Lemboub S, Graini S, et al. Effect of binder content on relative density, microstructure and properties of complex cemented carbides obtained by thermal explosion-pressing. J Alloys Compd. 2009;487:235–242. doi: 10.1016/j.jallcom.2009.07.105
   Web of Science ®Google Scholar
• Lemboub S, Boudebane S, Gotor FJ. Core-rim structure formation in TiC-Ni based cermets fabricated by a combined thermal explosion/hot-pressing process. Int J Refract Met Hard Mater. 2018;70:84–92. doi: 10.1016/j.ijrmhm.2017.09.014
   Web of Science ®Google Scholar
• Moreira AB, Ribeiron LMM, Lacerda P, et al. Characterization of iron-matrix composites reinforced by in situ TiC and ex situ WC fabricated by casting. Metals. 2021;11(6):862–874. doi: https://doi.org/10.3390/met11060862
   Web of Science ®Google Scholar
• Amelzadeh M, Mirsalehi SE. Dissimilar vacuum brazing of cemented carbide to steel using double-layer filler metals. J Manuf Process. 2019;47:1–9. doi: 10.1016/j.jmapro.2019.09.015
   Web of Science ®Google Scholar
• Sangwoo N, Hyung WL, Jung IH, et al. Microstructural Characterization of TiC-Reinforced metal matrix composites fabricated by laser cladding using FeCrCoNiAlTiC high entropy alloy powder. Appl Sci. 2021;14:6580–6594. doi: 10.3390/app11146580
   Google Scholar
• Zhang M, Li M, Chi J, et al. In-situ (Ti, Nb)C reinforced Ni-based coatings: new insights into microstructure evolution, enhanced phase configuration behavior and tribological properties. Ceram Int. 2020;46:14161–14172. doi: 10.1016/j.ceramint.2020.02.223
   Web of Science ®Google Scholar
• Saessi M, Alizadeh A, Abdollahi A. Wear behavior and dry sliding tribological properties of ultra-fine grained Al5083 alloy and boron carbide-reinforced Al5083-based composite at room and elevated temperatures. Trans Nonferrous Met Soc China. 2021;31:74–94. doi: 10.1016/S1003-6326(20)65479-6
   Web of Science ®Google Scholar
• Zhang M, Li M, Chi J, et al. Microstructure evolution, recrystallization and tribological behavior of TiC/WC composite ceramics coating. Vacuum. 2019;166:64–71. doi: 10.1016/j.vacuum.2019.04.049
   Web of Science ®Google Scholar
• Bupesh Raja VK, Gupta M. Joining of metal matrix composites. Encyclopedia Mater Compos. 2021;1:502–511. doi: 10.1016/B978-0-12-819724-0.00004-5
   Google Scholar
• Pan L, Gu J, Zou W, et al. Brazing joining of Ti3AlC2 ceramic and 40Cr steel based on ag-cu-Ti filler metal. J Mater Process Technol. 2018;251:181–187. doi: 10.1016/j.jmatprotec.2017.08.017
   Web of Science ®Google Scholar
• Li Y, Chen C, Yi R, et al. Review: special brazing and soldering. J Manuf Process. 2020;60:608–635. doi: 10.1016/j.jmapro.2020.10.049
   Web of Science ®Google Scholar
• Mercan S. Investigating the effect of brazing parameters on joint quality in DIN 2391 steel material and natural stone cutting core sockets joined by using induction brazing method. J Manuf Process. 2018;35:79–87. doi: 10.1016/j.jmapro.2018.07.019
   Web of Science ®Google Scholar
• Cai XQ, Wang DP, Wang Y, et al. Microstructural evolution and mechanical properties of TiB2-TiC-SiC ceramics joint brazed using Ti-Ni composite foils. J Eur Ceram Soc. 2020;40:3380–3390. doi: 10.1016/j.jeurceramsoc.2020.03.053
   Google Scholar
• Feng J, Zhang L. Interface structure and mechanical properties of the brazed joint of TiC cermet and steel. J Eur Ceram Soc. 2006;26:1287–1292. doi: 10.1016/j.jeurceramsoc.2005.01.043
   Web of Science ®Google Scholar
• Kota N, Charan MS, Laha T, et al. Review on development of metal/ceramic interpenetrating phase composites and critical analysis of their properties. Ceram Int. 2022;48:1451–1483. doi: 10.1016/j.ceramint.2021.09.232
   Web of Science ®Google Scholar
• Sanin VN, Yukhvid VI. Centrifugation-driven melt infiltration in high-temperature layered systems. Inorg Mater. 2005;41(3):247–254. doi: https://doi.org/10.1007/s10789-005-0118-9
   Web of Science ®Google Scholar
• Kamynina OK, Vadchenko SG, Shchukin AS. SHS-Aided joining of ceramic materials with the ta substrate. Russ J Non-Ferrous Metals. 2019;60(4):422–425. doi: https://doi.org/10.3103/S1067821219040035
   Web of Science ®Google Scholar
• Arab A, Guo Y, Zhou Q, et al. Joining AlCoCrFeNi high entropy alloys and al-6061 by explosive welding method. Vacuum. 2020;174:1–8. doi: 10.1016/j.vacuum.2020.109221
   Web of Science ®Google Scholar
• Vasanth Kumar R, Keshavamurthy R, Chandra R, et al. Influence of hot rolling on friction and wear behavior of Al6061-ZrB2 in-situ metal matrix composites. J Manuf Process. 2021;69:473–490. doi: 10.1016/j.jmapro.2021.07.058
   Web of Science ®Google Scholar
• Brandes EA, B G (Eds). Smithells. Metals reference book, chapter 8 thermochemical data. Oxford seventh. Butterworth Heinemann; 1992.
   Google Scholar
• Pierson HO. Handbook of refractory carbides and nitrides - properties, characteristics, processing and applications. New Jersey-USA: Noyes Publications Westwood; 1996. p. 71.
   Google Scholar
• Onuoha CC, Kiporous GJ, Farhat ZN, et al. The effects of metal binder content and carbide grain size on the aqueous corrosion behavior of TiC-316L stainless steel cermets. Int J Refract Metals Hard Mater. 2014;44:129–141. doi: 10.1016/j.ijrmhm.2014.02.002
   Web of Science ®Google Scholar
• Luyckx S, Love A. The relationship between the abrasion resistance and the hardness of WC-Co alloys. J S Afr I Min Metall. 2004;104:579–582.
   Google Scholar
• Huo Y, Zhao X, Fang Y, et al. In situ synthesis mechanism of double core/rim structure Ti(C, N)-based cermets prepared by reactive hot pressing. Int J Mater Res Technol. 2022;19:4439–4450.
   Google Scholar
• Verma V, Manoj Kumar BV. Tribological characteristics of conventionally sintered TiCN-WC-Ni/Co cermets against cemented carbide. Ceram Int. 2017;43:368–375. doi: 10.1016/j.ceramint.2016.09.167
   Web of Science ®Google Scholar