Integrity of Co-Cr-C coated P92 steel for power plant pipework applications

References

• Viswanathan R, Bakker W. Materials for ultrasupercritical coal power plants – boiler materials: part 1. J Mater Eng Perform. 2001;10:81–95.10.1361/105994901770345394
   Google Scholar
• Laverde D, Gomez-acebo T, Castro F. Continuous and cyclic oxidation of T91 ferritic steel under steam. Corros Sci. 2004;46:613–631.10.1016/S0010-938X(03)00173-2
   Google Scholar
• Nicholls J. Designing oxidation-resistant coatings. JOM. 2000;52:28–35.10.1007/s11837-000-0112-2
   Google Scholar
• Bellucci A, Matera S, Fry A, et al. The steam oxidation and mechanical performance of a ferritic-martensitic steel coated with slurry and pack cementation aluminide coating. In: EPRI, International Conference on Corrosion in Power Plants. San Diego, USA: EPRI; 2015. p. 1–12.
   Google Scholar
• Aguero A, Muelas R, Gutierrez M, et al. Cyclic oxidation and mechanical behaviour of slurry aluminide coatings for steam turbine components. Surf Coat Technol. 2007;201:6253–6260.10.1016/j.surfcoat.2006.11.033
   Google Scholar
• Bates B, Zhang Y, Dryepondt S, et al. Creep behavior of pack cementation aluminide coatings on grade 91 ferritic–martensitic alloy. Surf Coat Technol. 2014;240:32–39.10.1016/j.surfcoat.2013.12.008
   Google Scholar
• Aguero A, Muelas R, Gonzalez V. HVOF coatings for steam oxidation protection. Mater Corros. 2008;59:393–401.10.1002/(ISSN)1521-4176
   Google Scholar
• Kedward E. Electrodeposited composite coatings (wear resistant abrasive and dry lubricant cobalt-chromium carbide composite material coatings obtained by electrolytic co-deposition). Cobalt. 1973;3:53–59.
   Google Scholar
• Kedward E, Addison C. The development of a wear resistant electrodeposited composite coating for use on aero engines. Trans IMF. 1976;54:8–16.10.1080/00202967.1976.11870365
   Google Scholar
• Hoey T, Chen R, McCartney D, et al. Requirement for and use of coated P92 steel for enhanced structural integrity at high temperature. Acta Phys Pol A. 2015;128(4):514–520.10.12693/APhysPolA.128.514
   Google Scholar
• Cameron B, Foster J, Carew J. The effect of carbide content and pre-heat treatment on the oxidation characteristics of cobalt-chromium carbide electrodeposits in air at 1000 °C. Trans IMF. 1979;57:113–118.10.1080/00202967.1979.11870499
   Google Scholar
• El Dahshan M, Stringer J, Whittle D. The oxidation of cobalt chromium-carbon alloys. Anti-Corros Methods Mater. 1975;22:10–14.
   Google Scholar
• Durham R, Gleeson B, Young D. Silicon contamination effects in the oxidation of carbide-containing cobalt-chromium alloys. Mater Corros. 1998;49:855–863.10.1002/(ISSN)1521-4176
   Google Scholar
• Betterridge W. Cobalt and its alloys. Chichester: Ellis Horwood Limited; 1982.
   Google Scholar
• Clark J, Glasson D, Jayaweera S. Oxidation of chromium carbide. Thermochim Acta. 1986;103:193–199.10.1016/0040-6031(86)80032-6
   Google Scholar
• Kamal S, Jayaganthan R, Prakash S. High temperature oxidation studies of detonation-gun-sprayed Cr3C2-NiCr coating on Fe-and Ni-based superalloys in air under cyclic condition at 900 °C. J Alloy Compd. 2009;472:378–389.10.1016/j.jallcom.2008.04.087
   Google Scholar
• Callister W, Rethwisch D. Materials science and engineering: an introduction. New York (NY): Wiley; 2007.
   Google Scholar
• Birks N, Meier G, Pettit F. Introduction to the high-temperature oxidation of metals. London: Cambridge University Press; 2006.10.1017/CBO9781139163903
   Google Scholar
• Parker J. In-service behavior of creep strength enhanced ferritic steels grade 91 and grade 92 – part 1 parent metal. Int J Press Vessels Pip. 2013;101:30–36.10.1016/j.ijpvp.2012.10.001
   Google Scholar
• Llewellyn D, Hudd R. Steels – metallurgy and applications. London: Butterworth-Heinemann; 1998.
   Google Scholar
• Hoglund L, Agren J. Analysis of the Kirkendall effect, marker migration and pore formation. Acta Mater. 2001;49:1311–1317.10.1016/S1359-6454(01)00054-4
   Google Scholar
• Wasmer K, Nikbin K, Webster G. Prediction of scatter in creep crack growth data from creep failure strain properties. J ASTM Int. 2006;3:1–13.
   Google Scholar
• Hald J. Microstructure and long-term creep properties of 9–12% Cr steels. Int J Press Vessels Pip. 2008;85:30–37.10.1016/j.ijpvp.2007.06.010
   Google Scholar