Design, construction and monitoring of concrete roadway pavement at extremely steep longitudinal slopes

References

• AASHTO, 1993. Guide for the design of pavement structure. Washington: American Association of Highway and Transporations Officials.
   Google Scholar
• ACI Committee 318, 2019. Building code requirements for structural concrete (ACI 318-19) and commentary on building code requirements for structural concrete (ACI 318R-19). Farmington Hills: American Concrete Institute.
   Google Scholar
• ACI Committee 330, 2017. Guide for the design and construction of concrete site paving for industrial and trucking facilities (ACI 330.2R-17). Farmington Hills: American Concrete Institute.
   Google Scholar
• Barber, E. S, 1963. Shear loads on pavements. Public Roads, 32, 141–144.
   Google Scholar
• Burke, J. E., and Dhamrait, J. S, 1967. A twenty-year report on the Illinois continuously reinforced pavement. Highway Research Record, 189, 197–211.
   Google Scholar
• Caquot, A. I., and Kérisel, J. L, 1948. Tables for the calculation of passive pressure, active pressure and bearing capacity of foundations. Paris: Gauthier-Villars.
   Google Scholar
• Cargnin, A. P., and Balbo, J. T, 2021. Cracking patterns of continuously reinforced concrete pavement using black and galvanized steel under tropical climate. International Journal of Pavement Engineering, 22, 41–53.
   Web of Science ®Google Scholar
• Dhamrait, J. S., and Taylor, R. K, 1977. Terminal Treatments for Illinois Continuously Reinforced Concrete Pavements. Interim Report IHR-36. Springfield, IL: Illinois Department of Transportation.
   Google Scholar
• Dos Anjos Ribeiro Cordeiro, M. J, et al., 2017. Climate and disaster resilient transport in small island developing states: a call for action. The World Bank.
   Google Scholar
• Duncan, J. M., and Mokwa, R. L, 2001. Passive earth pressures: theories and tests. Journal of Geotechnical and Geoenvironmental Engineering, 127, 248–257.
   Web of Science ®Google Scholar
• Huang, Y. H, 1993. Pavement analysis and design. Upper Saddle River: Pearson Prentice Hall.
   Google Scholar
• Jaiswal, H, 2012. Rational use of terminal systems in Portland cement concrete pavements. Texas Tech University.
   Google Scholar
• Johnson, S, Faiz, A, and Visser, A, 2019. Concrete Pavements for Climate Resilient Low-Volume Roads in Pacific Island Countries. The World Bank.
   Google Scholar
• Karim, M. R., et al., 2013. Degree of vehicle overloading and its implication on road safety in developing countries. Civil and Environmental Research, 3, 20–31.
   Google Scholar
• Mccullough, B. F, 1971. Evaluation of terminal anchorage installations on rigid pavements. Highway Research Record, 21–29.
   Google Scholar
• Mccullough, B. F, and WU, W.-Y., 1992. Terminal movement in continuously reinforced concrete pavements. Research Report No. 1169-4. Austin, TX: Texas Department of Transportation.
   Google Scholar
• Mitchell, R. A, 1963. End anchors for continuously-reinforced concrete pavements. Highway Research Record, 50–82.
   Google Scholar
• NAVFAC, 1986. Design Manual 7.02, foundations & earth structures. Alexandra: Department of the Navy, Naval Facilities Engineering Command.
   Google Scholar
• Oh, H. J., et al., 2016. Experimental evaluation of longitudinal behavior of continuously reinforced concrete pavement depending on base type. Construction and Building Materials, 114, 374–382.
   Web of Science ®Google Scholar
• Perrie, B, 2000. Low-volume concrete roads. Midrand: Cement and Concrete Institute.
   Google Scholar
• Potyondy, J. G, 1961. Skin friction between various soils and construction materials. Geotechnique, 11, 339–353.
   Google Scholar
• Razouki, S. S., Al-Muhanna, R., and Hashim, Z, 2020. Average full-trailer truck equivalency factors for uphill flexible pavements in developing countries. International Journal of Pavement Engineering.
   Web of Science ®Google Scholar
• Razouki, S. S., and Radeef, H. Y, 2005. Increased damage to uphill flexible pavements from trucks. Proceedings of the Institution of Civil Engineers-Transport, 158, 33–34.
   Web of Science ®Google Scholar
• Ren, D, Houben, L, and Rens, L, 2013. Cracking behavior of continuously reinforced concrete pavements in Belgium: characterization of current design concept. Transportation Research Record, 2367, 97–106.
   Google Scholar
• Roesler, J. R, Hiller, J. E., and Brand, A. S., 2016. Continuously Reinforced Concrete Pavement Manual, Guidelines for Design, Construction, Maintenance, and Rehabilitation. United States. Federal Highway Administration.
   Google Scholar
• Ryu, S. W., et al., 2012. Rational use of terminal anchorages in Portland cement concrete pavement. Transportation Research Record, 2305, 62–73.
   Google Scholar
• Shelby, M. D., and Ledbetter, W. B, 1962. Experience in Texas with terminal anchorage of concrete pavement. Highway Research Board Bulletin.
   Google Scholar
• Teng, T, and Coley, J, 1970. Continuously Reinforced Concrete Pavement Observation Program. Report No. 1. Jackson, MS: Mississippi State Highway Department.
   Google Scholar
• Terzaghi, K, 1943. Theoretical soil mechanics. New York: John Wiley & Sons.
   Google Scholar
• UFC 3-250-01, 2016. Pavement design for roads and parking areas, U.S. Army Corps of Engineers.
   Google Scholar
• Westergaard, H.M, 1926. Stresses in concrete pavements computed by theoretical analysis. Public Roads, 7, 25–35.
   Google Scholar
• Zollinger, D. G., and Soares, J, 1999. Performance of Continuously Reinforced Concrete Pavements, Volume VII-Summary. Federal Highway Administration (FHWA).
   Google Scholar