References
- Allan, G., 2002. History of slurry and the international slurry surfacing association. In: Proceedings of the international slurry surfacing association’s 5th world congress.
- Andrews, E.M., et al., 1995. Evaluation of micro-surfacing mixture design procedures and the effects of material variation on the test responses.
- Bhargava, N., Siddagangaiah, A.K., and Ryntathiang, T.L., 2020. State of the art review on design and performance of microsurfacing. Road Materials and Pavement Design, 21, 2091–2125.
- Fooladi, A., and Hesami, S., 2021. Experimental investigation of the effect of types of fillers on the performance of microsurfacing asphalt mixture. Journal of Materials in Civil Engineering, 33, 4021139.
- Hafezzadeh, R., and Kavussi, A., 2021. Application of microsurfacing in repairing pavement surface rutting. Road Materials and Pavement Design, 22, 1219–1230.
- Huffman, J.E., 1975. Emulsified asphalts in paving and maintenance. Canadian Technical Asphalt Assn. Toronto, Canada.
- Ilias, M., et al., 2018. Addressing Raveling Resistance in Microsurfacing Specifications.
- International Slurry Surfacing Association, 2008. Test method for measurement of stability and resistance to compaction, vertical and lateral displacement of multilayered fine aggregate cold mixes: TB 147. ISSA Technical Bulletin, 147, 4–8.
- ISSA, 2005. Outline guide design procedure for slurry seal. Technical Bulletin, 111.
- ISSA, 2005. Test method for preparation of microsurface and slurry seal specimens for evaluation by hot mixed asphalt design methods (modified Marshall test). Technical Bulletin, 148.
- ISSA, 2005. Test method for wet stripping of cured slurry surfacing mixtures. Technical Bulletin, 114.
- ISSA, 2010. Recommended performance guideline For Micro Surfacing. ISSA A-143.
- ISSA, 2015. Test method for measurement of slurry seal consistency. Technical Bulletin, 106.
- ISSA, 2017. Test method for measurement of excess asphalt in bituminous mixtures by use of a loaded wheel tester and sand adhesion, design technical bulletins, No. 109. Annapolis (Md.): International Slurry Surfacing Association (revised).
- ISSA, 2017. Laboratory test method for wet track abrasion of slurry surfacing systems. Technical Bulletin, 100.
- ISSA, 2017. Test method for determining mix time for slurry surfacing systems. Technical Bulletin 113. International Slurry Surfacing Association Technical Bulletin.
- ISSA, 2017. Test method to classify emulsified asphalt/aggregate mixture systems by modified cohesion tester measurement of set and cure characteristics. Technical Bulletin, 139.
- I. TB147, 2005. Test Method for Measurement of Stability and Resistance to Compaction, Vertical and Lateral Displacement of Multilayered Fine Aggregate Cold Mixes.
- Johannes, P.T., 2014. Development of an Improved Mixture Design Framework for Slurry Seals and Micro-Surfacing Treatments.
- Kavussi, A., and Zahedi, T.A., 2010. Study on the abrasion resistance of water-borne traffic lights by abrasion test machine, in wet conditions.
- Kim, Y., and Lee, H.D., 2006. Development of mix design procedure for cold In-place recycling with foamed asphalt. J. Mater. Civ. Eng, 18, 116–124.
- Kumar, R., and Ryntathiang, T.L., 2016. New laboratory mix methodology of microsurfacing and mix design. Transp. Res. Procedia, 17, 488–497.
- Ma, W., et al., 2017. Optimising water content in cold recycled foamed asphalt mixtures. Road Materials and Pavement Design, 18 (sup4), 58–78.
- Patrick, S., 2018. Guidelines and specifications for microsurfacing, Australia: Research Report AP-R569-18 (Sydney, Australia: Austroads), Ltd … .
- Poursoltani, M., and Hesami, S., 2018. Laboratory investigation of the effect of using reclaimed asphalt pavement on micro surfacing mixture properties. Journal of Transportation Research, 15, 237–247.
- Poursoltani, M., and Hesami, S., 2020. Performance evaluation of microsurfacing mixture containing reclaimed asphalt pavement. International Journal of Pavement Engineering, 21, 1491–1504.
- Praveen, K., and Ankit, G., 2010. Case studies on failure of bituminous pavements. In: Proceedings of the 1st international conference on pavement preservation: pp. 505–518.
- Robati, M., Carter, A., and Perraton, D., 2015. Evaluation of a modification of current microsurfacing mix design procedures. Canadian Journal of Civil Engineering, 42, 319–328.
- Shatnawi, S., 2008. Maintenance Technical Advisory Guide, Volume 1: Flexible Pavement Preservation (2nd Edn.). Sacramento (CA): California Department of Transportation.
- Simões, D., Almeida-Costa, A., and Benta, A., 2017. Preventive maintenance of road pavement with microsurfacing—an economic and sustainable strategy. International Journal of Sustainable Transportation, 11, 670–680.
- Smith, R.E., et al., 1994. Use of micro-surfacing in highway pavements. Final Report (No. FHWA/TX-95/1289-2F)..
- Tex-240-F, 2004. Determining Optimum Residual Asphalt Content (RAC) for Microsurfacing Systems, Texas.
- Yang, S.-H., and Liu, G.-W., 2017. Using packing theory to improve micro-surfacing mix design 1 procedure and evaluating its long term performance 2. In: Transportation research board 96th annual meeting, No. 17-04313 Washington DC, United States.
- Zalnezhad, M., and Hesami, E., 2020. Effect of steel slag aggregate and bitumen emulsion types on the performance of microsurfacing mixture. Journal of Traffic and Transportation Engineering (English Edition), 7, 215–226.