Multi-functional conductive cementitious composites including phase change materials (PCM) with snow/ice melting capability

References

• Abbas, N., Saad, M., and Habib, M, 2022. Impact of carbon fibers on mechanical and durability properties of self-compacting concrete. Engineering Proceedings, 22 (1), 9.
   Google Scholar
• Abdulla, H., 2018. Design, construction, and performance of heated concrete pavements system. Graduate Thesis. Iowa State University.
   Google Scholar
• Aguayo, M., et al., 2016. The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: experiments and finite element simulations. Cement and Concrete Composites, 73, 29–41.
   Web of Science ®Google Scholar
• Al-Dahawi, A., et al., 2016. Effect of mixing methods on the electrical properties of cementitious composites incorporating different carbon-based materials. Construction and Building Materials, 104, 160–168.
   Web of Science ®Google Scholar
• Anand, P., et al., 2014. Cost comparison of alternative airfield snow removal methodologies. Civil, Construction and Environmental Engineering, Iowa State University.
   Google Scholar
• Anupam, B.R., Sahoo, U.C., and Rath, P, 2020. Phase change materials for pavement applications: a review. Construction and Building Materials, 247, 118553.
   Web of Science ®Google Scholar
• Bentz, D.P, and Turpin, R, 2007. Potential applications of phase change materials in concrete technology. Cement and Concrete Composites, 29 (7), 527–532.
   Web of Science ®Google Scholar
• Chuang, W., et al., 2017. Dispersion of carbon fibers and conductivity of carbon fiber-reinforced cement-based composites. Ceramics International, 43 (17), 15122–15132.
   Web of Science ®Google Scholar
• Chung, D.D.L, 2000. Cement reinforced with short carbon fibers: a multifunctional material. Composites Part B: Engineering, 31 (6-7), 511–526.
   Web of Science ®Google Scholar
• Cui, H., et al., 2018. Experimental study of carbon fiber reinforced alkali-activated slag composites with micro-encapsulated PCM for energy storage. Construction and Building Materials, 161, 442–451.
   Web of Science ®Google Scholar
• Ding, S., et al., 2023. Self-heating ultra-high performance concrete with stainless steel wires for active deicing and snow-melting of transportation infrastructures. Cement and Concrete Composites, 138, 105005.
   Web of Science ®Google Scholar
• Faneca, G., et al., 2018. Development of conductive cementitious materials using recycled carbon fibres. Cement and Concrete Composites, 92, 135–144.
   Web of Science ®Google Scholar
• Farnam, Y., et al., 2017. Incorporating phase change materials in concrete pavement to melt snow and ice. Cement and Concrete Composites, 84, 134–145.
   Web of Science ®Google Scholar
• Fernandes, F., et al., 2014. On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials. Cement and Concrete Composites, 51, 14–26.
   Web of Science ®Google Scholar
• Gao, Y., Huang, L., and Zhang, H, 2016. Study on anti-freezing functional design of phase change and temperature control composite bridge decks. Construction and Building Materials, 122, 714–720.
   Web of Science ®Google Scholar
• Gomis, J., et al., 2015. Self-heating and deicing conductive cement. experimental study and modeling. Construction and Building Materials, 75, 442–449.
   Web of Science ®Google Scholar
• Hunger, M., et al., 2009. The behavior of self-compacting concrete containing micro-encapsulated phase change materials. Cement and Concrete Composites, 31 (10), 731–743.
   Web of Science ®Google Scholar
• Jayalath, A., et al., 2016. Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials. Construction and Building Materials, 120, 408–417.
   Web of Science ®Google Scholar
• Kantro, D, 1980. Influence of water-reducing admixtures on properties of cement paste – a miniature slump test. Cement, Concrete and Aggregates, 2, 95–102.
   Google Scholar
• Karayolları Genel Müdürlüğü, 2021. 2020 Yılı Devlet ve İl Yolları Bakım-İşletme Maliyetler, Ankara.
   Google Scholar
• Karayolları Genel Müdürlüğü Tesisler ve Bakım Dairesi Başkanlığı, 2018. Kar ve Buzla Mücadele Rehberi, Ankara.
   Google Scholar
• Kitchener, B. G., Wainwright, J., and Parsons, A.J, 2017. A review of the principles of turbidity measurement. Progress in Physical Geography: Earth and Environment, 41 (5), 620–642.
   Google Scholar
• Lund, J.W, 2005. Pavement snow melting. Geo-Heat Center, Oregon Institute of Technology, Klamath Falls, OR.
   Google Scholar
• Lv, L., et al., 2016. Synthesis and characterization of a new polymeric microcapsule and feasibility investigation in self-healing cementitious materials. Construction and Building Materials, 105, 487–495.
   Web of Science ®Google Scholar
• Manning, B.J., et al., 2015. Assessing the feasibility of incorporating phase change material in hot mix asphalt. Sustainable Cities and Society, 19, 11–16.
   Web of Science ®Google Scholar
• Norvell, C., Sailor, D.J., and Dusicka, P, 2013. The effect of microencapsulated phase-change material on the compressive strength of structural concrete. Journal of Green Building, 8 (3), 116–124.
   Web of Science ®Google Scholar
• Rangaraju, P.R., et al., 2006. Potential of potassium acetate deicer to induce ASR in concrete, and its mitigation. American Society of Civil Engineers Airfield and Highway Pavements Specialty Conference, Atlanta, Georgia, United States, 683–694.
   Google Scholar
• Sahmaran, M, 2020. Elektrostatik Yük Boşaltma Kabiliyetine Sahip Yeni Nesil Çimento Bağlayıcılı Kompozitler. TÜBİTAK 1002-Hızlı Destek Programı, 119M175 Numaralı Proje, Ankara.
   Google Scholar
• Sahmaran, M., Christianto, H.A., and Yaman, İ.Ö., 2006. The effect of chemical admixtures and mineral additives on the properties of self-compacting mortars. Cement and Concrete Composites, 28 (5), 432–440.
   Web of Science ®Google Scholar
• Sakulich, A. R., and Bentz, D. P, 2012. Increasing the service life of bridge decks by incorporating phase-change materials to reduce freeze-thaw cycles. Journal of Materials in Civil Engineering, 24 (8), 1034–1042.
   Web of Science ®Google Scholar
• Savija, B, 2018. Smart crack control in concrete through use of phase change materials (PCMs): a review. Materials, 11 (5), 654.
   PubMed Web of Science ®Google Scholar
• Seferoğlu, A., Seferoğlu, M., and Akpınar, V, 2015. Karayolu ve Havayolu Kaplamalarında Kullanılan Kar ve Buzla Mücadele Yöntemlerinin Mali Analizi. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 3 (1), 407–416.
   Google Scholar
• Wang, C., et al., 2008. Effect of carbon fiber dispersion on the mechanical properties of carbon fiber-reinforced cement-based composites. Materials Science and Engineering: A, 487 (1–2), 52–57.
   Web of Science ®Google Scholar
• Wu, J., Liu, J., and Yang, F, 2015. Three-phase composite conductive concrete for pavement deicing. Construction and Building Materials, 75, 129–135.
   Web of Science ®Google Scholar
• Xiong, W., et al., 2015. A novel capsule-based self-recovery system with a chloride ion trigger. Scientific Reports, 5 (1), 10866.
   PubMedGoogle Scholar
• Xiong, T., Shah, K.W., and Kua, H.W, 2021. Thermal performance enhancement of cementitious composite containing polystyrene/n-octadecane microcapsules: an experimental and numerical study. Renewable Energy, 169, 335–357.
   Web of Science ®Google Scholar
• Yeon, J.H., and Kim, K.K, 2018. Potential applications of phase change materials to mitigate freeze-thaw deteriorations in concrete pavement. Construction and Building Materials, 177, 202–209.
   Web of Science ®Google Scholar
• Zhang, J, and Das, D.S, 2009. Selection of effective and efficient snow removal and ice control technologies for Cold-Region Bridges. Journal of Civil, Environmental and Architectural Engineering, 3 (1), 1–14.
   Google Scholar