References
- ACI Committee 522, 2010. Pervious concrete: Report no. 522R-10, AmericanConcrete Institute, Farmington Hills, Michigan, p. 40.
- Adresi, M., et al., 2023. A comprehensive review on pervious concrete. Construction and Building Materials, 407, 133308.
- Adresi, M. and Pakhirehzan, F., 2023. Evaluating the performance of self-sensing concrete sensors under temperature and moisture variations-a review. Construction and Building Materials, 404, 132923.
- Afzal, G. and Rasool, T., 2024. Exploring the impact of nano-limestone cementitious material on mechanical, infiltration, and microstructure properties of pervious concrete. Innovative Infrastructure Solutions, 9 (3), 1–21.
- Aïtcin, P.C., 2016. Supplementary cementitious materials and blended cements. In: R.J. Flatt, ed. Science and technology of concrete admixtures. Zurich: Elsevier, 53–73.
- Akand, L., Yang, M., and Wang, X., 2018. Effectiveness of chemical treatment on polypropylene fibers as reinforcement in pervious concrete. Construction and Building Materials, 163, 32–39.
- AlShareedah, O. and Nassiri, S., 2021. Pervious concrete mixture optimization, physical, and mechanical properties and pavement design: a review. Journal of Cleaner Production, 288, 125095.
- ASTM C1701-09, 2009. Standard test method for infiltration rate of in place pervious concrete, Annual Book of ASTM Standards, ASTM International, West Conshohocken, PA.
- ASTM International, 2012. C1754/C1754 – 12: Standard test method for density and void content of hardened pervious concrete. Annu. B. ASTM Stand, 3.
- Balaguru, P. and Chong, K., 2006. Nanotechnology and concrete: research opportunities. Proceedings of the ACI session on nanotechnology of concrete: recent developments and future perspectives, 15–28.
- BIS, 1959. 516, method of tests for strength of concrete. New Delhi, India: Bureau of Indian Standards. n.d.
- BIS, 2000. British Standards Institution, BS EN 12350-1:2000 Testing Fresh Concrete.
- BIS, I., 1989. 8112: 43 grade ordinary Portland cement–specification. New Delhi: Bureau of Indian Standards.
- BIS – IS 6461, 1973. PART-7, Glossary of terms relating to cement concrete - Part VII: Mixing, Laying, compaction, curing and other construction aspects. Engineering, 360.
- Chandrappa, A.K., et al., 2018. Laboratory investigations and field implementation of pervious concrete paving mixtures. Advances in Civil Engineering Materials, 7 (1), 447–462.
- Chandrappa, A.K. and Biligiri, K.P., 2016. Pervious concrete as a sustainable pavement material–research findings and future prospects: A state-of-the-art review. Construction and Building Materials, 111, 262–274.
- Chang, H., et al., 2010. Thin film field-effect phototransistors from bandgap-tunable, solution-processed, few-layer reduced graphene oxide films. Advanced Materials, 22, 4872–4876.
- Chang, J.-J., et al., 2016. Properties of pervious concrete made with electric arc furnace slag and alkali-activated slag cement. Construction and Building Materials, 109, 34–40.
- Chuah, S., et al., 2018. Investigation on dispersion of graphene oxide in cement composite using different surfactant treatments. Construction and Building Materials, 161, 519–527.
- Daniyal, M., Azam, A., and Akhtar, S., 2018. Application of nanomaterials in civil engineering. In: Z.H. Khan, ed. Nanomaterials and their applications. New Delhi: Springer, 169–189.
- Debnath, B. and Sarkar, P.P., 2019. Permeability prediction and pore structure feature of pervious concrete using brick as aggregate. Construction and Building Materials, 213, 643–651.
- Devasena, M. and Karthikeyan, J., 2015. Investigation on strength properties of graphene oxide concrete. International Journal of Engineering Science Invention Research & Development, 1, 307–310.
- Devi, S.C. and Khan, R.A., 2019. Mechanical and durability performance of concrete incorporating graphene oxide. Journal of Materials and Engineering Structures JMES, 6, 201–214.
- Devi, S.C. and Khan, R.A., 2020a. Effect of graphene oxide on mechanical and durability performance of concrete. Journal of Building Engineering, 27, 101007.
- Devi, S.C. and Khan, R.A., 2020b. Compressive strength and durability behavior of graphene oxide reinforced concrete composites containing recycled concrete aggregate. Journal of Building Engineering, 32, 101800.
- Díez, N., et al., 2015. Enhanced reduction of graphene oxide by high-pressure hydrothermal treatment. Rsc Advances, 5 (100), 81831–81837.
- Dikin, D.A., et al., 2007. Preparation and characterization of graphene oxide paper. Nature, 448 (7152), 457–460.
- Eda, G., et al., 2010. Blue photoluminescence from chemically derived graphene oxide. Advanced Materials, 22 (4), 505–509.
- Ghafoori, N. and Dutta, S., 1995. Laboratory investigation of compacted no-fines concrete for paving materials. Journal of Materials in Civil Engineering, 7, 183–191.
- Gong, K., et al., 2015. Reinforcing effects of graphene oxide on Portland cement paste. Journal of Materials in Civil Engineering, 27 (2), A4014010.
- Grubeša, I.N., et al., 2018. Draining capability of single-sized pervious concrete. Construction and Building Materials, 169, 252–260.
- Haselbach, L., et al., 2016. Laboratory evaluations of long-term hydraulic performance and maintenance requirements for pervious concrete mixes: A case study in Southern Brazil. In: International Conference on Transportation and Development 2016. pp. 309–317.
- Huang, J., et al., 2021. Evaluation of pore size distribution and permeability reduction behavior in pervious concrete. Construction and Building Materials, 290, 123228.
- Hummers Jr, W.S. and Offeman, R.E., 1958. Preparation of graphitic oxide. Journal of the American Chemical Society 80 (6), 1339–1339.
- Ibrahim, H.A., et al., 2020. Hydraulic and strength characteristics of pervious concrete containing a high volume of construction and demolition waste as aggregates. Construction and Building Materials, 253, 119251.
- IS: 383, 2016. Coarse and fine aggregate for concrete-specification. New Delhi: Bureau of Indian Standards.
- IS 5816, 1999. Method of test for splitting tensile strength of concrete. New Delhi, India: Bureau of Indian Standards.
- Kapoor, K., Ahmad, T., and Afzal, G., 2019. Experimental study on infiltration properties of pervious concrete. In: Sustainable Engineering: Proceedings of EGRWSE 2018. Springer, pp. 367–373.
- Kumar, H.V., Woltornist, S.J., and Adamson, D.H., 2016. Fractionation and characterization of graphene oxide by oxidation extent through emulsion stabilization. Carbon, 98, 491–495.
- Li, X., et al., 2016. Incorporation of graphene oxide and silica fume into cement paste: a study of dispersion and compressive strength. Construction and Building Materials, 123, 327–335.
- Li, X., et al., 2017a. Effects of graphene oxide agglomerates on workability, hydration, microstructure and compressive strength of cement paste. Construction and Building Materials, 145, 402–410.
- Li, X., et al., 2017b. Effects of graphene oxide aggregates on hydration degree, sorptivity, and tensile splitting strength of cement paste. Composites Part A: Applied Science and Manufacturing, 100, 1–8.
- Li, L.G., et al., 2022. Effects of aggregate bulking and film thicknesses on water permeability and strength of pervious concrete. Powder Technology, 396, 743–753.
- Li, G.Y., Wang, P.M., and Zhao, X., 2005. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes. Carbon, 43, 1239–1245.
- Lin, C., Wei, W., and Hu, Y.H., 2016. Catalytic behavior of graphene oxide for cement hydration process. Journal of Physics and Chemistry of Solids, 89, 128–133.
- Liu, T., et al., 2019. Strength enhancement of recycled aggregate pervious concrete using a cement paste redistribution method. Cement and Concrete Research, 122, 72–82.
- Lu, L. and Ouyang, D., 2017. Properties of cement mortar and ultra-high strength concrete incorporating graphene oxide nanosheets. Nanomaterials, 7 (7), 187.
- Lv, S., et al., 2013. Effect of graphene oxide nanosheets of microstructure and mechanical properties of cement composites. Construction and Building Materials, 49, 121–127.
- Manna, A.K. and Pati, S.K., 2009. Tuning the electronic structure of graphene by molecular charge transfer: a computational study. Chemistry–An Asian Journal, 4 (6), 855–860.
- Marcano, D.C., et al., 2010. Improved synthesis of graphene oxide. ACS Nano, 4, 4806–4814.
- Mardani, M., et al., 2022. Piezoresistivity and mechanical properties of self-sensing CNT cementitious nanocomposites: optimizing the effects of CNT dispersion and surfactants. Construction and Building Materials, 349, 128127.
- Mohammed, A., et al., 2015. Incorporating graphene oxide in cement composites: a study of transport properties. Construction and Building Materials, 84, 341–347.
- Muhammad, N.Z., et al., 2015. Waterproof performance of concrete: a critical review on implemented approaches. Construction and Building Materials, 101, 80–90.
- Nazeer, M., Kapoor, K., and Singh, S.P., 2023. Strength, durability and microstructural investigations on pervious concrete made with fly ash and silica fume as supplementary cementitious materials. Journal of Building Engineering, 69, 106275.
- Pan, Z., et al., 2015. Mechanical properties and microstructure of a graphene oxide–cement composite. Cement and Concrete Composites, 58, 140–147.
- Paulchamy, B., Arthi, G., and Lignesh, B.D., 2015. A simple approach to stepwise synthesis of graphene oxide nanomaterial. J NanomedNanotechnol, 6, 1.
- Pieralisi, R., Cavalaro, S.H.P., and Aguado, A., 2016. Discrete element modelling of the fresh state behavior of pervious concrete. Cement and Concrete Research, 90, 6–18.
- Qin, Y., and Hiller, J.E., 2014. Understanding pavement-surface energy balance and its implications on cool pavement development. Energy and Buildings, 85, 389–399.
- Rahman, S., et al., 2015. Developing a framework for low-volume road implementation of pervious concrete pavements. International Journal of Transportation Science and Technology, 4 (1), 77–91.
- Ramadhansyah, P.J., et al., 2014. A review of porous concrete pavement: applications and engineering properties. Applied Mechanics and Materials, 554, 37–41.
- Reddy, P. and Ravi Prasad, D., 2023. Graphene oxide reinforced cement concrete – a study on mechanical, durability and microstructure characteristics. Fullerenes, Nanotubes and Carbon Nanostructures, 31 (3), 255–265.
- Rossen, J.E., Lothenbach, B., and Scrivener, K.L., 2015. Composition of C–S–H in pastes with increasing levels of silica fume addition. Cement and Concrete Research, 75, 14–22.
- Sanchez, F., and Sobolev, K., 2010. Nanotechnology in concrete–a review. Construction and Building Materials, 24 (11), 2060–2071.
- Sansalone, J., Kuang, X., and Ranieri, V., 2008. Permeable pavement as a hydraulic and filtration interface for urban drainage. Journal of Irrigation and Drainage Engineering, 134 (5), 666–674.
- Shang, Y., et al., 2015. Effect of graphene oxide on the rheological properties of cement pastes. Construction and Building Materials, 96, 20–28.
- Simalti, A. and Singh, A.P., 2020. Comparative study on direct shear behavior of manufactured and recycled shredded tyre steel fiber reinforced self-consolidating concrete. Journal of Building Engineering, 29, 101169.
- Singh, A., Sampath, P.V., and Biligiri, K.P., 2020. A review of sustainable pervious concrete systems: emphasis on clogging, material characterization, and environmental aspects. Construction and Building Materials, 261, 120491.
- Sobolev, K. and Gutiérrez, M.F., 2005. How nanotechnology can change the concrete world. American Ceramic Society Bulletin, 84, 14.
- Sumanasooriya, M.S. and Neithalath, N. 2009. Stereology-and morphology-based pore structure descriptors of enhanced porosity (pervious) concretes. ACI Materials Journal, 106 (5).
- Sun, Z., Lin, X., and Vollpracht, A., 2018. Pervious concrete made of alkali activated slag and geopolymers. Construction and Building Materials, 189, 797–803.
- Tong, T., et al., 2016. Investigation of the effects of graphene and graphene oxide nanoplatelets on the micro-and macro-properties of cementitious materials. Construction and Building Materials, 106, 102–114.
- Wang, H., et al., 2019. Investigation on the mechanical properties and environmental impacts of pervious concrete containing fly ash based on the cement-aggregate ratio. Construction and Building Materials, 202, 387–395.
- Wang, Y., Iqbal, Z., and Mitra, S., 2006. Rapidly functionalized, water-dispersed carbon nanotubes at high concentration. Journal of the American Chemical Society, 128, 95–99.
- Xu, G. and Shi, X., 2018. Graphene oxide-modified pervious concrete with fly ash as sole binder. ACI Materials Journal, 115, 369–379.
- Yang, H., et al., 2017. Experimental study of the effects of graphene oxide on microstructure and properties of cement paste composite. Composites Part A: Applied Science and Manufacturing, 102, 263–272.
- Zou, D., et al., 2018. Effects of pore structure and water absorption on internal curing efficiency of porous aggregates. Construction and Building Materials, 163, 949–959.