Electromagnetic (EM) sensor measurement for residual stress characterisation in welded steel plates

References

• Withers PJ, Bhadeshia HKDH. Residual stress. part 2 – nature and origins. Mater Sci Technol. 2001;17(4):366–375.
   Web of Science ®Google Scholar
• Abu-Nabah BA, Yu F, Hassan WT, et al. Eddy current residual stress profiling in surface-treated engine alloys. Nondestr Test Eval. 2009;24(1–2):209–232.
   Web of Science ®Google Scholar
• Jin M, Nam H, Jang DY, et al. Residual stress measurement on welded specimen by neutron diffraction. J Mater Process Technol. 2004;156:1171–1177.
   Google Scholar
• Takahashi S, Kobayashi S, Kikuchi H, et al. Relationship between mechanical and magnetic properties in cold rolled low carbon steel. J Appl Phys. 2006;20183908(11):113908. DOI:10.1063/1.2401048
   Google Scholar
• Hristoforou E, Ktena A, Vourna P, et al. Dependence of magnetic permeability on residual stresses in alloyed steels. AIP Adv. 2018 Apr;8(4):047201. DOI:10.1063/1.4994202.
   Web of Science ®Google Scholar
• Takahashi S, Kobayashi S, Tom I. Comparison of magnetic non-destructive methods applied for inspection of steel degradation. NDT E Int. 2017;91(June):54–60.
   Google Scholar
• Werke M, Wretland A, Ottosson P, et al. Geometric distortion analysis using a combination and machining simulation. Procedia CIRP. 2018;72:1481–1486.
   Google Scholar
• Hosseinzadeh F, Hamelin CJ, Traore Y, et al. Investigating optimal cutting configurations for the contour method of weld residual stress measurement. Int J Pres Ves Pip. 2018;164:55–67.
   Web of Science ®Google Scholar
• Muránsky O, Hamelin CJ, Hosseinzadeh F, et al. Mitigating cutting-induced plasticity in the contour method, part 2: numerical analysis. Int J Solids Struct. 2016;95:254–262.
   Web of Science ®Google Scholar
• Hosseinzadeh F, Traore Y, Bouchard PJ, et al. Mitigating cutting-induced plasticity in the contour method, part 1: experimental. Int J Solids Struct. 2016;94–95:247–253.
   Web of Science ®Google Scholar
• Prime MB. Plasticity effects in incremental slitting measurement of residual stresses. Eng Fract Mech. 2010;77(10):1552–1566.
   Web of Science ®Google Scholar
• Jones KW, Bush RW. Investigation of residual stress relaxation in cold expanded holes by the slitting method. Eng Fract Mech. 2017;179:213–224.
   Web of Science ®Google Scholar
• Won J, Ferracane JL. Measuring the residual stress in dental composites using a ring slitting method. Dent Mater. 2005;21(9):882–889.
   PubMed Web of Science ®Google Scholar
• Shokrieh MM, Akbari S, Daneshvar A. A comparison between the slitting method and the classical lamination theory in determination of macro-residual stresses in laminated composites. Compos Struct. 2013;96:708–715.
   Web of Science ®Google Scholar
• Kumar R, Dey HC, Pradhan AK, et al. Numerical and experimental investigation on distribution of residual stress and the influence of heat treatment in multi-pass dissimilar welded rotor joint of alloy 617/10cr steel. Int J Press Vessel Pip. 2022;199(May):104715.
   Google Scholar
• Giri A, Pandey C, Mahapatra MM, et al. On the estimation of error in measuring the residual stress by strain gauge rosette. Meas J Int Meas Confed. 2015;65:41–49.
   Web of Science ®Google Scholar
• Taraphdar PK, Kumar R, Pandey C, et al. Significance of finite element models and solid-state phase transformation on the evaluation of weld induced residual stresses. Met Mater Int. 2021;27(9):3478–3492.
   Web of Science ®Google Scholar
• Taraphdar PK, Thakare JG, Pandey C, et al. Novel residual stress measurement technique to evaluate through thickness residual stress fields. Mater Lett. 2020;277:128347.
   Web of Science ®Google Scholar
• Sun GF, Wang ZD, Lu Y, et al. Investigation on microstructure and mechanical properties of NV E690 steel joint by laser-MIG hybrid welding. Mater Des. 2017;127(January):297–310.
   Google Scholar
• Urriolagoitia-Sosa G, Romero-Ángeles B, Hernández-Gómez LH, et al. Crack-compliance method for assessing residual stress due to loading/unloading history: numerical and experimental analysis. Theor Appl Fract Mech. 2011;56(3):188–199.
   Web of Science ®Google Scholar
• Rossini NS, Dassisti M, Benyounis KY, et al. Methods of measuring residual stresses in components. Mater Des. 2012;35:572–588.
   Web of Science ®Google Scholar
• Watkins TR, Schajer GS, Lance MJ. Residual stress measurements. Elsevier. 2014;1. DOI:10.1016/B978-0-08-096532-1.00109-6.
   Google Scholar
• Yaghi AH, Hyde TH, Becker AA, et al., “Measuring and modelling residual stresses in a butt-welded P91 steel pipe,” in 1st International Conference on Sustainable Power Generation and Supply, SUPERGEN ’09, 2009, pp. 1–5. doi: 10.1109/SUPERGEN.2009.5348017.
   Google Scholar
• Wang M, Liu Y, Zan T, et al., “Residual stress test and simulation of incremental hole drilling method,” in Proceedings of 2016 7th International Conference on Mechanical and Aerospace Engineering, ICMAE 2016, 2016, pp. 257–261. doi: 10.1109/ICMAE.2016.7549546.
   Google Scholar
• Vourna P, Ktena A, Tsarabaris P, et al. Magnetic residual stress monitoring technique for ferromagnetic steels. Metals. 2018;8(8):592.
   Web of Science ®Google Scholar
• Hristoforou E, Ktena A, Vourna P, et al. Dependence of magnetic permeability on residual stresses in alloyed steels. AIP Adv. 2018;8(4):3–6.
   Web of Science ®Google Scholar
• Zhi Z, Mu-Lin HU. Research of measuring residual stress in laser cladding with anisotropic material based on reverse deduce. Pac Rim Conf Lasers Electro-Optics. 2009;0(4):1–2. DOI:10.1109/CLEOPR.2009.5292705.
   Google Scholar
• Lo KH, Mummery P, Buttle DJ. Characterisation of residual principal stresses and their implications on failure of railway rails. Eng Fail Anal. 2010;17(6):1273–1284.
   Web of Science ®Google Scholar
• Vourna P, Ktena A, Tsakiridis PE, et al. A novel approach of accurately evaluating residual stress and microstructure of welded electrical steels. NDT E Int. 2014;71:33–42.
   Web of Science ®Google Scholar
• Lan Z, Jianchun F, Laibin Z, et al. Measurement using innovative intense magnetic memory method magnetic. 2009 9th Int Conf Electron Meas Instrum. 2009;2–1047. DOI:10.1109/ICEMI.2009.5274623
   Google Scholar
• Hatafuku H, Sarudate C, Konno A. Estimation of the residual strain in magnetic metals by using the ultrasonic method. IEEE Int Magn Conf. 2002;38(5):3309–3311.
   Google Scholar
• Pan Q, Li Y, Bai X, et al. Inspecting integrity and residual stress of plate by ultrasonic wave. IEEE Int Conf Mechatron Autom, ICMA 2011. 2011;2:1137–1141. DOI:10.1109/ICMA.2011.5985820
   Google Scholar
• Pan Q. Gear surface residual stress measurement with ultrasonic wave. 2014 IEEE Int Conf Mechatron Autom. 2014;2:413–417. DOI:10.1109/ICMA.2014.6885733
   Google Scholar
• Wang J, Xu C, Song J, et al. Experimental study of turbine disk residual stress measurement using Lcr wave. 2016 IEEE Far East NDT New Technol Appl Forum. 2016;2:90–94. DOI:10.1109/FENDT.2016.7992002
   Google Scholar
• Kudryavtsev Y, Kleiman J. Non-destructive measurement of residual stresses in railway wheels by ultrasonic method. 2016 18th Int Wheel Congr. 2016;39–43. DOI:10.1109/IWC.2016.8068364
   Google Scholar
• Kleiman J, Kudryavtsev Y, “Measurement of residual stresses in materials and welded elements using ultrasonic method,” 2015 IEEE Far East NDT New Technol. Appl. Forum, pp. 143–148, doi: 10.1109/FENDT.2015.7398328.
   Google Scholar
• Withers PJ, Turski M, Edwards L, et al. Recent advances in residual stress measurement. Int J Press Vessel Pip. 2008;85(3):118–127.
   Web of Science ®Google Scholar
• Withers PJ, Bhadeshia HKDH. Residual stress. part 1 – measurement techniques. Mater Sci Technol. 2001;17(4):355–365.
   Web of Science ®Google Scholar
• Sablik MJ, Augustyniak B. The effect of mechanical stress on a Barkhausen noise signal integrated across a cycle of ramped magnetic field. J Appl Phys. 1996;963(2):963.
   Google Scholar
• Titto S, Otala M, Säynäjäkangas S. Non-destructive magnetic measurement of steel grain size. Non-Destructive Test. 1976;9(3):117–120.
   Google Scholar
• Gauthier J, Krause TW, Atherton DL. Measurement of residual stress in steel using the magnetic Barkhausen noise technique. NDT E Int. 1998;31(1):23–31.
   Web of Science ®Google Scholar
• Kelleher JF, Buttle DJ, Mummery PM, et al. Residual stress mapping in railway rails. Mater Sci Forum. 2005;490–491(July):165–170.
   Google Scholar
• Ren S, Fan W, Zhou R, et al. Experimental study of alternating current stress measurement under a uniaxial stress. Far East Forum Nondestr Eval New Technol Appl. 2013;107–111. DOI:10.1109/FENDT.2013.6635538.
   Google Scholar
• Chen K, Brennan FP. A theoretical and experimental study of alternating current stress measurement under different loading modes. J Strain Anal Eng Des. 1998;33(4):291–303.
   Web of Science ®Google Scholar
• Shen J, Zhou L, Jacobs W, et al. Real-time in-line steel microstructure control through magnetic properties using an EM sensor. J Magn Magn Mater. 2019;490(May):165504.
   Google Scholar
• Langman R. Magnetic properties of mild steel under conditions of biaxial stress. IEEE Trans Magn. 1990;26(4):1246–1251.
   Web of Science ®Google Scholar
• Wilson JW, Karimian N, Liu J, et al. Measurement of the magnetic properties of P9 and T22 steel taken from service in power station. J Magn Magn Mater. 2014;360:52–58.
   Web of Science ®Google Scholar
• Wang ML, Wang G. Electromagnetic sensors for assessing and monitoring civil infrastructures. Sens Technol Civ Infrastruct. 2014;1:238–264.
   Google Scholar
• Aghadavoudi-Jolfaei M, Shen J, Smith A, et al. Non-destructive measurement of microstructure and tensile strength in varying thickness commercial DP steel strip using an EM sensor. J Magn Magn Mater. 2019;473(October 2018):477–483.
   Google Scholar
• Li X, Li K, Cai Z, et al. A review of austenite memory effect in HAZ of B containing 9% Cr martensitic heat resistant steel. Metals (Basel). 2019;9(11):1–21.
   Web of Science ®Google Scholar
• Zhou L, et al., “Non-destructive monitoring of phase fraction and tensile properties of dual-phase steels by an electro-magnetic sensor,” Proc 6th Eur Roll Conf. 2013; [Online]. Available: http://221.0.90.144
   Google Scholar
• Liu J, Hao XJ, Zhou L, et al. Measurement of microstructure changes in 9cr – 1mo and 2. 25cr – 1mo steels using an electromagnetic sensor. Scr Mater. 2012;66(6):367–370.
   Web of Science ®Google Scholar
• Wang ZD, Gu Y, Wang YS. A review of three magnetic NDT technologies. J Magn Magn Mater. 2012;324(4):382–388.
   Web of Science ®Google Scholar
• Vourna P, Hervoches C, Vrana M, et al. Correlation of magnetic properties and residual stress distribution monitored by X-ray and neutron diffraction in welded AISI 1008 steel sheets. IEEE Trans Magn. 2015;51(1):1–4.
   Web of Science ®Google Scholar
• Bali M, Muetze A. Modeling the effect of cutting on the magnetic properties of electrical steel sheets. IEEE Trans Ind Electron. 2016;99:1. DOI:10.1109/TIE.2016.2589920
   Google Scholar
• Prime MB, Gnäupel-Herold T, Baumann JA, et al. Residual stress measurements in a thick, dissimilar aluminum alloy friction stir weld. Acta Mater. 2006;54(15):4013–4021.
   Web of Science ®Google Scholar
• Farajian M, Nitschke-Pagel T, Dilger K. Relaxation of welding residual stresses - part I: under quasi-static loading. Int J Microstruct Mater Prop. 2012;7(1):3–15.
   Google Scholar