Discontinuous transformation-induced plasticity behaviour in governing the mechanical behaviour in medium-Mn steels

References

• Mertinger V, Nagy E, Tranta F, et al. Strain-induced martensitic transformation in textured austenitic stainless steels. Mater Sci Eng A. 2008;481-482:718–11.
   Web of Science ®Google Scholar
• Oliver S, Jones T, Fourlaris G. Dual phase versus TRIP strip steels: comparison of dynamic properties for automotive crash performance. Mater Sci Technol. 2007;23(4):423–431.
   Web of Science ®Google Scholar
• Sugimoto K, Iida T, Sakaguchi J, et al. Retained austenite characteristics and tensile properties in a TRIP type bainitic sheet steel. ISIJ Int. 2000;40(9):902–908. DOI:10.2355/isijinternational.40.902
   Web of Science ®Google Scholar
• De Cooman B. Structure-properties relationship in TRIP steels containing carbide-free bainite. Opin Solid St M. 2004;8(3–4):285–303.
   Web of Science ®Google Scholar
• Li H, Jiang R, He L, et al. Influence of deformation degree and cooling rate on microstructure and phase transformation temperature of B1500HS steel. Acta Metall. Sin. 2018;31(1):33–47. doi:10.1007/s40195-017-0594-3.
   Google Scholar
• Kamoutsi H, Gioti E, Haidemenopoulos G, et al. Kinetics of solute partitioning during intercritical annealing of a medium-Mn steel. Metall Mater Trans A. 2015;46(11):4841–4846. DOI:10.1007/s11661-015-3118-7
   Google Scholar
• Grässel O, Krüger L, Frommeyer G, et al. High strength Fe-Mn-(Al, Si) TRIP/TWIP steels development-properties-application. Int J Plast. 2000;16(10–11):1391–1409. DOI:10.1016/S0749-6419(00)00015-2
   Web of Science ®Google Scholar
• Yoo J, Park K. Microband-induced plasticity in a high Mn-Al-C light steel. Mater Sci Eng A. 2008;496(1–2):417–424.
   Web of Science ®Google Scholar
• Ning H, Li X, Meng L, et al. Effect of Ni and Mo on microstructure and mechanical properties of grey cast iron. Mater Technol Adv Perform Mater. 2023;38(1):2172991. DOI:10.1080/10667857.2023.2172991
   Google Scholar
• Guo L, Su X, Dai L, et al. Strain ageing embrittlement behaviour of X80 self-shielded flux-cored girth weld metal. Mater Technol Adv Perform Mater. 2023;38(1):2164978. DOI:10.1080/10667857.2023.2164978
   Google Scholar
• Yang C, Xu H, Wang Y, et al. Hot Tearing analysis and process optimisation of the fire face of Al-Cu alloy cylinder head based on MAGMA numerical simulation. Mater Technol Adv Perform Mater. 2023;38(1):2165245. DOI:10.1080/10667857.2023.2165245
   Google Scholar
• Li Q, Zuo H, Feng J, et al. Strain rate and temperature sensitivity on the flow behaviour of a duplex stainless steel during hot deformation. Mater Technol Adv Perform Mater. 2023;38(1):2166216. DOI:10.1080/10667857.2023.2166216
   Google Scholar
• Misra RDK. Strong and ductile texture-free ultrafine-grained magnesium alloy via three-axial forging. Mater Lett. 2023;331:133443.
   Web of Science ®Google Scholar
• Misra RDK. Enabling manufacturing of multi-axial forging-induced ultrafine- grained strong and ductile magnesium alloys: a perspective of process-structure- property paradigm. Mater Technol Adv Perform Mater. 2023;38(1):2189769.
   Google Scholar
• Wang L, Li J, Liu Z, et al. Towards strength-ductility synergy in nanosheets strengthened titanium matrix composites through laser power bed fusion of MXene/Ti composite powder. Mater Technol Adv Perform Mater. 2023;38(1):2181680. DOI:10.1080/10667857.2023.2181680
   Google Scholar
• Niu G, Zurob H, Misra RDK. Superior fracture toughness in a high-strength austenitic steel with heterogeneous lamellar microstructure. Acta Mater. 2022;226:117642.
   Web of Science ®Google Scholar
• Misra RDK, Challa VSA, Injeti VSY. Phase reversion-induced nanostructured austenitic alloys: an overview. Mater Technol Adv Perform Mater. 2022;37(7):437–449.
   Google Scholar
• Li Z, Misra R, Ding H, et al. The significant impact of pre-strain on the structure-mechanical properties relationship in cold-rolled medium manganese TRIP steel. Mater Sci Eng A. 2018;712:206–213.
   Web of Science ®Google Scholar
• Li Z, Zhang X, Mou Y, et al. The impact of intercritical annealing in conjunction with warm deformation process on microstructure, mechanical properties and TRIP effect in medium-Mn TRIP steels. Mater Sci Eng A. 2019;746:363–371.
   Web of Science ®Google Scholar
• Wu Z, Tang Y, Chen W, et al. Exploring the influence of Al content on the hot deformation behavior of Fe-Mn-Al-C steels through 3D processing map. Vacuum. 2019;159:447–455.
   Web of Science ®Google Scholar
• Liang Z, Li Y, Huang M. The respective hardening contributions of dislocations and twins to the flow stress of a twinning-induced plasticity steel. Scr Mater. 2016;112:28–31.
   Web of Science ®Google Scholar
• Han J, Nam J, Lee Y. The mechanism of hydrogen embrittlement in intercritically annealed medium Mn TRIP steel. Acta Mater. 2016;113:1–10.
   Web of Science ®Google Scholar
• De Moor E, Matlock D, Speer J, et al. Austenite stabilization through manganese enrichment. Scr Mater. 2011;64(2):185–188. DOI:10.1016/j.scriptamat.2010.09.040
   Web of Science ®Google Scholar
• Srivastava A, Bhattacharjee D, Jha G, et al. Microstructural and mechanical characterization of C-Mn-Al-Si cold-rolled TRIP-aided steel. Mater Sci Eng A. 2007;445:549–557.
   Web of Science ®Google Scholar
• Van Dijk N, Butt A, Zhao L, et al. Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling. Acta Mater. 2005;53(20):5439–5447. DOI:10.1016/j.actamat.2005.08.017
   Web of Science ®Google Scholar
• Speer J, Streicher A, Matlock D, et al. Quenching and partitioning: a fundamentally new process to create high strength trip sheet microstructures. Symposium on the Thermodynamics, Kinetics, Characterization and Modeling of: Austenite Formation and Decomposition. 2003;505–522.
   Google Scholar
• Challa V, Wan X, Somani M, et al. Significance of interplay between austenite stability and deformation mechanisms in governing three-stage work hardening behavior of phase-reversion induced nanograined/ultrafine-grained (NG/UFG) stainless steels with high strength-high ductility combination. Scr Mater. 2014;86:60–63.
   Web of Science ®Google Scholar
• Misra R, Challa V, Venkatsurya P, et al. Interplay between grain structure, deformation mechanisms and austenite stability in phase-reversion-induced nanograined/ultrafine-grained austenitic ferrous alloy. Acta Mater. 2015;84:339–348.
   Web of Science ®Google Scholar
• Zhao J, Yan X, Wen S, et al. Microstructure and mechanical properties of high manganese TRIP steel. J Iron Steel Res Int. 2012;19(4):57–62. DOI:10.1016/S1006-706X(12)60088-0
   Web of Science ®Google Scholar
• Arlazarov A, Gouné M, Bouaziz O, et al. Evolution of microstructure and mechanical properties of medium Mn steels during double annealing. Mater Sci Eng A. 2012;542:31–39.
   Web of Science ®Google Scholar
• Dan W, Li S, Zhang W, et al. The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel. Mater Des. 2008;29(3):604–612. DOI:10.1016/j.matdes.2007.02.019
   Web of Science ®Google Scholar
• Jha B, Avtar R, Dwivedi V, et al. Applicability of modified Crussard-Jaoul analysis on the deformation behaviour of dual-phase steels. J Mater Sci Lett. 1987;6(8):891–893. DOI:10.1007/BF01729860
   Google Scholar
• Cai Z, Ding H, Xue X, et al. Microstructural evolution and mechanical properties of hot-rolled 11% manganese TRIP steel. Mater Sci Eng A. 2013;560:388–395.
   Web of Science ®Google Scholar
• Cai Z, Ding H, Kamoutsi H, et al. Interplay between deformation behavior and mechanical properties of intercritically annealed and tempered medium-manganese transformation-induced plasticity steel. Mater Sci Eng A. 2016;654:359–367.
   Web of Science ®Google Scholar
• Cai Z, Ding H, Xue X, et al. Significance of control of austenite stability and three-stage work-hardening behavior of an ultrahigh strength-high ductility combination transformation-induced plasticity steel. Scr Mater. 2013;68(11):865–868. DOI:10.1016/j.scriptamat.2013.02.010
   Web of Science ®Google Scholar
• Cai M, Li Z, Chao Q, et al. A novel Mo and Nb microalloyed medium Mn TRIP steel with maximal ultimate strength and moderate ductility. Metall Mater Trans A. 2014;45(12):5624–5634. DOI:10.1007/s11661-014-2504-x
   Google Scholar
• Cai Z, Ding H, Misra R, et al. Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content. Acta Mater. 2015;84:229–236.
   Web of Science ®Google Scholar
• Bhadeshia H, Edmonds D. Bainite in silicon steels: new composition-property approach Part 1. Metal Sci. 1983;17(9):411–419.
   Web of Science ®Google Scholar
• Chiang J, Lawrence B, Boyd J, et al. Effect of microstructure on retained austenite stability and work hardening of TRIP steels. Mater Sci Eng A. 2011;528(13–14):4516–4521. DOI:10.1016/j.msea.2011.02.032
   Web of Science ®Google Scholar