References
- Grohganz H, Priemel PA, Löbmann K, et al. Refining stability and dissolution rate of amorphous drug formulations. Expert Opin Drug Deliv 2014;11:977–989.
- Amidon GL, Lennernäs H, Shah VP, et al. A theoretical basis for a biopharmaceutic drug classification: the correlation of in vitro drug product dissolution and in vivo bioavailability. Pharm Res 1995;12:413–420.
- Dahan A, Miller JM, Amidon GL. Prediction of solubility and permeability class membership: provisional BCS classification of the world's top oral drugs. AAPS J 2009;11:740–746.
- Kumar S, Gupta SK. Pharmaceutical solid dispersion technology: a strategy to improve dissolution of poorly water-soluble drugs. Recent Pat Drug Deliv Formul 2013;7:111–121.
- Labuschagne PW, Naicker B, Kalombo L. Micronization, characterization and in-vitro dissolution of shellac from PGSS supercritical CO2 technique. Int J Pharm 2016;499:205–216.
- El-Setouhy DA, Gamiel AA, Badawi AA, et al. Comparative study on the in vitro performance of blister molded and conventional lornoxicam immediate release liquitablets: accelerated stability study and anti-inflammatory and ulcerogenic effects. Pharm Dev Technol 2016;30:1–10. [Epub ahead of print].
- Jafarifar E, Hajialyani M, Akbari M, et al. Preparation of a reproducible long-acting formulation of risperidone-loaded PLGA microspheres using microfluidic method. Pharm Dev Technol 2016;8:1–8. [Epub ahead of print]
- Wlodarski K, Sawicki W, Paluch KJ, et al. The influence of amorphization methods on the apparent solubility and dissolution rate of tadalafil. Eur J Pharm Sci 2014;62:132–140.
- Böttger R, Knappe D, Hoffmann R. Readily adaptable release kinetics of prodrugs using protease-dependent reversible PEGylation. J Control Release 2016;230:88–94.
- Harmon P, Galipeau K, Xu W, et al. Mechanism of dissolution-induced nanoparticle formation from a copovidone-based amorphous solid dispersion. Mol Pharm 2016;13:1467–1481.
- Alhalaweh A, Bergström CA, Taylor LS. Compromised in vitro dissolution and membrane transport of multidrug amorphous formulations. J Control Release 2016;229:172–182.
- Chen J, Ormes JD, Higgins JD, et al. Impact of surfactants on the crystallization of aqueous suspensions of celecoxib amorphous solid dispersion spray dried particles. Mol Pharm 2015;12:533–541.
- Miyazaki T, Yoshioka S, Aso Y, et al. Ability of polyvinylpyrrolidone and polyacrylic acid to inhibit the crystallization of amorphous acetaminophen. J Pharm Sci 2004;93:2710–2717.
- Van den Mooter G, Wuyts M, Blaton N, et al. Physical stabilisation of amorphous ketoconazole in solid dispersions with polyvinylpyrrolidone K25. Eur J Pharm Sci 2001;12:261–269.
- Aso Y, Yoshioka S, Zhang J, et al. Effect of water on the molecular mobility of sucrose and poly(vinylpyrrolidone) in a colyophilized formulation as measured by (13)C-NMR relaxation time. Chem Pharm Bulletin 2002;50:822–826.
- Shi NQ, Lei YS, Song LM, et al. Impact of amorphous and semicrystalline polymers on the dissolution and crystallization inhibition of pioglitazone solid dispersions. Powder Tech 2013;247:211–221.
- Shi NQ, Yao J, Wang XL. Effect of polymers and media type on extending the dissolution of amorphous pioglitazone and inhibiting the recrystallization from a supersaturated state. Drug Dev Ind Pharm 2014;40:1112–1122.
- Isaac J, Kaity S, Ganguly S, et al. Microwave-induced solid dispersion technology to improve bioavailability of glipizide. J Pharm Pharmacol 2013;65:219–229.
- Shamsuddin Fazil M, Ansari SH, et al. Atorvastatin solid dispersion for bioavailability enhancement. J Adv Pharm Technol Res 2016;7:22–26.
- Yadav DN, Anand T, Sharma M, et al. Microwave technology for disinfestation of cereals and pulses: An overview. J Food Sci Technol 2014;51:3568–3576.
- García MF, Calzada V, Camacho X, et al. Microwave-assisted synthesis of HYNIC protected analogue for 99mTc labeled antibody. Curr Radiopharm 2014;7:84–90.
- Schou-Pedersen AM, Østergaard J, Cornett C, et al. Evaluation of microwave oven heating for prediction of drug-excipient compatibilities and accelerated stability studies. Int J Pharm 2015;485:97–107.
- Yu Y, Zhou Q, Wang J. The ultra-rapid synthesis of 2D graphitic carbon nitride nanosheets via direct microwave heating for field emission. Chem Commun (Camb) 2016;52:3396–3399.
- Kim KH, Cho KM, Kim DW, et al. The role of layer-controlled graphene for tunable microwave heating and its applications to the synthesis of inorganic thin films. ACS Appl Mater Interfaces 2016;8:5556–5562.
- Piao J, Lee JY, Weon JB, et al. Angelica gigas nakai and soluplus-based solid formulations prepared by hot-melting extrusion: oral absorption enhancing and memory ameliorating effects. PLoS One 2015;10:e0124447.
- Penumetcha SS, Gutta LN, Dhanala H, et al. Hot melt extruded aprepitant-soluplus® solid dispersion: preformulation considerations, stability and in-vitro study. Drug Dev Ind Pharm 2016;1:1–44. [Epub ahead of print]
- Lee JY, Kang WS, Piao J, et al. Soluplus®/TPGS-based solid dispersions prepared by hot-melt extrusion equipped with twin-screw systems for enhancing oral bioavailability of valsartan. Drug Des Devel Ther 2015;9:2745–2756.
- Dian L, Yu E, Chen X, et al. Enhancing oral bioavailability of quercetin using novel soluplus polymeric micelles. Nanoscale Res Lett 2014;9:684. doi: 10.1186/1556-276X-9-684.
- Mitchell K, Ford JL, Armstrong DJ, et al. The influence of additives on the cloud point, disintegration and dissolution of hydroxypropylmethylcellulose gels and matrix tablets. Int J Pharm 1990;66:233–242.
- Opanasopit P, Ngawhirunpat T, Rojanarata T, et al. Camptothecin-incorporating N-phthaloylchitosan-g-mPEG self-assembly micellar system: effect of degree of deacetylation. Colloids Surf B Biointerfaces 2007;60:117–124.
- Higuchi T, Connors KA. Phase solubility techniques. Adv Anal Chem Instrum 1965;4:117–122.
- Baldwin RL. How Hofmeister ion interactions affect protein stability. Biophys J 1996;71:2056–2063.
- Sunil C. Joshi Sol-gel behavior of hydroxypropyl methylcellulose (HPMC) in ionic media including drug release. Materials 2011;4:1861–1905.
- Alexandridis P, Holzwarth JF. Differential scanning calorimetry investigation of the effect of salts on aqueous solution properties of an amphiphilic block copolymer (poloxamer). Langmuir 1997;13:6074–6082.
- Bikiaris DN. Solid dispersions, part I: recent evolutions and future opportunities in manufacturing methods for dissolution rate enhancement of poorly water-soluble drugs. Expert Opin Drug Deliv 2011;8:1501–1519.
- Shekunov B, Montgomery ER. Theoretical analysis of drug dissolution: I. solubility and intrinsic dissolution rate. J Pharm Sci 2016;20:S0022–S3549.
- Ha ES, Baek IH, Cho W, et al. Preparation and evaluation of solid dispersion of atorvastatin calcium with Soluplus® by spray drying technique. Chem Pharm Bull 2014;62:545–551.
- Turnbull D, Fischer JC. Rate of nucleation in condensed systems. J Chem Phys 1949;17:71–73.
- Alonzo DE, Gao Y, Zhou D, et al. Dissolution and precipitation behavior of amorphous solid dispersions. J Pharm Sci 2011;100:3316–3331.
- Kestur US, Lynne S, Taylor LS. Role of polymer chemistry in influencing crystal growth rates from amorphous felodipine. CrystEngComm 2010;12:2390–2397.
- Ren F, Su J, Xiong H, et al. Characterization of ibuprofen microparticle and improvement of the dissolution. Pharm Dev Technol 2016. [Epub ahead of print].