References
- Ababsa, D., and S. Bougoul. 2017. “Numerical Analysis of Thermal and Dynamic Behavior of a Roof Solar Collector.” Heat Transfer-Asian Research 46. https://doi.org/10.1002/htj.21224.
- Agathokleous, R., G. Barone, A. Buonomano, C. Forzano, S. A. Kalogirou, and A. Pal-ombo. 2019. “Building Façade Integrated Solar Thermal Collectors for air Heating: Exper-Imentation, Modelling and Applications.” Applied Energy 239: 658–679. https://doi.org/10.1016/j.apenergy.2019.01.020.
- Andrade Cando, A. X., W. Quitiaquez Sarzosa, and L. F. Toapanta. 2020. “CFD Analysis of a Solar Flat Plate Collector with Different Cross Sections.” Enfoque UTE 11. doi:10.29019/enfoque.v11n2.601.
- Arabzadeh, V., J. Jokisalo, and R. Kosonen. 2019. “A Cost-optimal Solar Thermal System for Apartment Buildings with District Heating in a Cold Climate.” International Journal of Sustainable Energy 38 (2): 141–162.
- Dassault Systèmes SOLIDWORKS Corp. n.d. SOLIDWORKS® CAD software [WWW Document]. Accessed 10 December 2022. https://www.solidworks.com.
- Department for Environment Food & Rural Affairs. 2008. Measurement of Domestic Hot Water Consumption in Dwellings.
- Eicker, U., D. Pietruschka, M. Haag, and A. Schmitt. 2014. “Energy and Economic Performance of Solar Cooling Systems World Wide.” Energy Procedia 57. https://doi.org/10.1016/j.egypro.2014.10.269.
- EU SCIENCE HUB. n.d. Photovoltaic Geographical Information System (PVGIS) [WWW Document]. URL https://ec.europa.eu/jrc/en/pvgis (accessed 10.12.22).
- Fertahi, S. ed-D., T. Bouhal, T. Kousksou, A. Jamil, and A. Benbassou. 2018. “Experimental Study and CFD Thermal Assessment of Horizontal hot Water Storage Tank Integrating Evacuated Tube Collectors with Heat Pipes.” Solar Energy 170. https://doi.org/10.1016/j.solener.2018.05.062.
- Fowzi, M. 2017. CFD Simulation of Enhancement Techniques in Flat Plate Solar Water Collectors.
- Garnier, C., T. Muneer, and J. Currie. 2018. “Numerical and Empirical Evaluation of a Novel Building Integrated Collector Storage Solar Water Heater.” Renewable Energy 126. https://doi.org/10.1016/j.renene.2018.03.041.
- Georgiou, L., M. Souliotis, S. Papaefthimiou, and P. A. Fokaides. 2021. “Numerical Simulation Data of Building Integrated Solar Thermal Collectors Under Diverse Conditions.” Data in Brief 39. https://doi.org/10.1016/j.dib.2021.107470.
- Gunjo, D. G., P. Mahanta, and P. S. Robi. 2017. “CFD and Experimental Investigation of Flat Plate Solar Water Heating System Under Steady State Condition.” Renewable Energy 106. https://doi.org/10.1016/j.renene.2016.12.041.
- Jiandong, Z., T. Hanzhong, and C. Susu. 2015. “Numerical Simulation for Structural Parameters of Flat-Plate Solar Collector.” Solar Energy 117. https://doi.org/10.1016/j.solener.2015.04.027.
- Kalogirou, S. A. 2005. Solar Water Heaters in Cyprus: Manufacturing, Performance and Applications.
- Kalogirou, S. A. 2009. Solar Energy Engineering. Elsevier. https://doi.org/10.1016/B978-0-12-374501-9.X0001-5.
- Kashani, A. H., P. S. Izadkhast, and A. Asnaghi. 2014. “Mapping of Solar Energy Potential and Solar System Capacity in Iran.” International Journal of Sustainable Energy 33 (4): 883–903.
- Kylili, A., P. A. Fokaides, A. Ioannides, and S. Kalogirou. 2018. “Environmental Assessment of Solar Thermal Systems for the Industrial Sector.” Journal of Cleaner Production 176. https://doi.org/10.1016/j.jclepro.2017.12.150.
- Lamnatou, C., I. Farkas, Z. Aggelos, A. Buonomano, A. Palombo, and D. Chemisana. 2017. Modelling and performance analysis of building integrated solar thermal (BIST) system. pp. 103-132.
- Leone, G., and M. Beccali. 2016. “Use of Finite Element Models for Estimating Thermal Performance of Façade-Integrated Solar Thermal Collectors.” Applied Energy 171. https://doi.org/10.1016/j.apenergy.2016.03.039.
- Long, J., J. Lu, M. Jiang, A. Du, R. Zhang, and A. Yongga. 2020. “Study on Solar Energy Utilization Characteristics of a Solar Building Integrated Wall.” Applied Thermal Engineering 175. https://doi.org/10.1016/j.applthermaleng.2020.115289.
- Mazloum, Y., and A. Ghanem. 2022. “Dynamic modelling of a ground-coupled solar ejector cooling system.” International Journal of Sustainable Energy 41 (11): 1903–1937.
- Medina Carril, D. M., J. G. Carrillo, R. D. Maldonado, and F. Avilés. 2016. “Finite ele-ment Analysis of a Solar Collector Plate Using two Plate Geometries.” Ingeniería e Investi-Gación 36 (3): 95–101. https://doi.org/10.15446/ing.investig.v36n3.56071
- Mintsa Do Ango, A. C., M. Medale, and C. Abid. 2013. “Optimization of the Design of a Polymer Flat Plate Solar Collector.” Solar Energy 87. doi:10.1016/j.solener.2012.10.006.
- Nayak, Nagaraj, A. Anarghya, V. N. Abhishek, and Nasser Al Ghufaili. 2018. “Numerical and Experimental Investigation on Low Cost Solar Water Heater for Ruralareas of Oman.” MOJ Solar and Photoenergy Systems 2 (2): 43–48.
- Papadopoulos, A., T. Tsoutsos, M. Frangou, K. Kalaitzakis, N. Stefanakis, and A. G. Boudouvis. 2017. “Innovative Optics for Concentrating Photovoltaic/Thermal (CPVT) Systems–the Case of the PROTEAS Solar Polygeneration System.” International Journal of Sustainable Energy 36 (8): 775–786.
- Papamanolis, N. 2016. “An Overview of Solar Energy Applications in Buildings in Greece.” International Journal of Sustainable Energy 35 (8): 814–823.
- Pawar, V. R., and S. Sobhansarbandi. 2020. “CFD Modeling of a Thermal Energy Storage Based Heat Pipe Evacuated Tube Solar Collector.” Journal of Energy Storage 30. https://doi.org/10.1016/j.est.2020.101528.
- Quitiaquez, W., J. Estupiñan-Campos, C. A. Isaza Roldán, F. Toapanta-Ramos, and A. Lobato-Campoverde. 2020. Análisis numérico de un sistema de calentamiento de agua utilizando un colector solar de placa plana. Ingenius. https://doi.org/10.17163/ings.n24.2020.10.
- Rangababu, J. A., K. Kiran Kumar, and S. Srinivasa Rao. 2015. “Numerical Analysis and Validation of Heat Transfer Mechanism of Flat Plate Collectors.” Procedia Engineering 127. https://doi.org/10.1016/j.proeng.2015.11.331.
- Sami, S., E. Marin, and J. Rivera. 2016. “Numerical Analysis of Thermosyphon Solar Water Heaters.” International Journal of Energy and Power Engineering 5 (2): 83. https://doi.org/10.11648/j.ijepe.20160502.18
- Souliotis, M. 2021. Flat Plate Solar Thermal Collector. Mendeley Data.
- Vetter, B., S. Fischer, and H. Dr√(ck. 2018. CFD-Based Development, Testing and Optimization of Flat Plate Collectors. https://doi.org/10.18086/eurosun2018.12.03.
- Wang, N., S. Zeng, M. Zhou, and S. Wang. 2015. “Numerical Study of Flat Plate Solar Collector with Novel Heat Collecting Components.” International Communications in Heat and Mass Transfer 69. https://doi.org/10.1016/j.icheatmasstransfer.2015.10.012.