370
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Heat transfer characteristics and thermal insulation optimization of buried ductile iron heat-supply pipeline

&
Pages 1497-1516 | Received 19 May 2023, Accepted 31 Oct 2023, Published online: 16 Nov 2023

References

  • Amanowicz, Łukasz. 2018. “Influence of Geometrical Parameters on the Flow Characteristics of Multi-Pipe Earth-to-Air Heat Exchangers – Experimental and CFD Investigations.” Applied Energy 226: 849–861. https://doi.org/10.1016/j.apenergy.2018.05.096.
  • Carusotti, S., R. Lombroni, P. Fanelli, L. Jackson, F. Giorgetti, P. F. Buxton, G. Calabrò, M. Romanelli, and E. R. de Villa Valdes. 2023. “Structural Behaviour Characterization of ST40 Inner Vacuum Chamber (IVC2) During a Plasma VDE Using ANSYS Workbench.” Fusion Engineering and Design 192: 113772. https://doi.org/10.1016/j.fusengdes.2023.113772.
  • Fan, H., S. Tariq, and T. Zayed. 2022. “Acoustic Leak Detection Approaches for Water Pipelines.” Automation in Construction 138: 104226. https://doi.org/10.1016/j.autcon.2022.104226.
  • Gupta, R., B. Lukić, A. Tengattini, F. Dufour, and M. Briffaut. 2022. “Experimental Characterisation of Transient Condensed Water Vapour Migration Through Cracked Concrete as Revealed by Neutron and x-ray Imaging: Effect of Initial Saturation.” Cement and Concrete Research 162: 106987. https://doi.org/10.1016/j.cemconres.2022.106987.
  • He, T., J. Hu, Y. Luo, P. Zhu, S. Cai, Y. Wang, H. Hou, G. Zou, and X. Ji. 2023. “Dual-Vapour-Thermal Engineering Evoking Bound Water Pathways of Vanadium Oxide for High-Rate and Durable Zinc-ion Storage.” Chemical Engineering Journal 471: 144739. https://doi.org/10.1016/j.cej.2023.144739.
  • Hu, P., S. Geng, X. Liu, C. Li, R. Zhu, and X. He. 2023. “A Three-Dimensional Numerical Pressure Transient Analysis Model for Fractured Horizontal Wells in Shale gas Reservoirs.” Journal of Hydrology 620: 129545. https://doi.org/10.1016/j.jhydrol.2023.129545.
  • Izadi, M., S. F. Taghavi, S. H. N. Safavi, F. Afsharpanah, and W. Yaïci. 2023. “Thermal Management of Shelter Building Walls by PCM Macro-Encapsulation in Commercial Hollow Bricks.” Case Studies in Thermal Engineering 47: 103081.
  • Kowtharapu, L. P., N. K. Katari, S. K. Muchakayala, and V. M. Marisetti. 2023. “Green Metric Tools for Analytical Methods Assessment Critical Review, Case Studies and Crucify.” TrAC Trends in Analytical Chemistry 166: 117196. https://doi.org/10.1016/j.trac.2023.117196.
  • Kowtharapu, L. P., N. K. Katari, S. K. Muchakayala, S. P. R. Pydimarry, V. K. Rekulapally, and C. A. Sandoval. 2023. “QbD Green Analytical Procedure for Novel Study of a Genotoxic and Carcinogenic Compound Trace Determination in Physiological Solution Compatibility.” Sustainable Chemistry and Pharmacy 33: 101079. https://doi.org/10.1016/j.scp.2023.101079.
  • Li, Y., S. Chang, L. Fu, and S. Zhang. 2016. “A Technology Review on Recovering Waste Heat from the Condensers of Large Turbine Units in China.” Renewable and Sustainable Energy Reviews 58: 287–296. https://doi.org/10.1016/j.rser.2015.12.059.
  • Li, C., and J. Li. 2023. “Thermal Characteristics of a Flat Plate Pulsating Heat Pipe Module for Onsite Cooling of High Power Server CPUs.” Thermal Science and Engineering Progress 37: 101542. https://doi.org/10.1016/j.tsep.2022.101542.
  • Ling, Y., X. She, X. Zhang, T. Chen, X. Lin, and J. Feng. 2022. “A PCM-Based Thermal Management System Combining Three-Dimensional Pulsating Heat Pipe with Forcedair Cooling.” Applied Thermal Engineering 213: 118732. https://doi.org/10.1016/j.applthermaleng.2022.118732.
  • Liu, Wei Na, et al. 2021. “Urban Water Plant Expansion Project in Gu’an County: Study on the Construction Scheme for the Installation of Nodular Cast Iron Pipe Outside the Source Pipe.” Hebei Water Conservancy 5: 46–47.
  • Mathur, A., A. K. Surana, and S. Mathur. 2016. “Numerical Investigation of the Performance and Soil Temperature Recovery of an EATHE System Under Intermittent Operations.” Renewable Energy 95: 510–521. https://doi.org/10.1016/j.renene.2016.04.037.
  • National Rubber Sealing Product Quality Supervision and Inspection Center. 2020. Heat-Resistant Rubber for Thermal PipelinesRubber Inspection Report. Shaanxi: National Quality Supervision and Inspection of Rubber Sealing ProductsHeart.
  • Oosterkamp, A., T. Ytrehus, and S. T. Galtung. 2016. “Effect of the Choice of Boundary Conditions on Modelling Ambient to Soil Heat Transfer Near a Buried Pipeline.” Applied Thermal Engineering 100: 367–377.
  • Qian, N., F. Jiang, M. Marengo, J. Chen, Y. Fu, J. Zhang, and J. Xu. 2023. “Start-up Behavior of Oscillating Heat Pipe in Grinding Wheel Under Axial-Rotation Conditions.” Applied Thermal Engineering 219: 119443. https://doi.org/10.1016/j.applthermaleng.2022.119443.
  • Rajamohan, S., A. Vinod, M. P. V. S. Aditya, H. G. Vadivudaiyanayaki, M. Arıcı, S. Nižetić, T. T. Le, R. Hidayat, and D. T. Nguyen. 2022. “Approaches in Performance and Structural Analysis of Wind Turbines – A Review.” Sustainable Energy Technologies and Assessments 53: 102570. https://doi.org/10.1016/j.seta.2022.102570.
  • Shen, J., and H. Yu. 2023. “Radial Quadrature Method for Evaluating the Beam Shape Coefficients in Spherical Coordinates.” Journal of Quantitative Spectroscopy and Radiative Transfer 305: 108627. https://doi.org/10.1016/j.jqsrt.2023.108627.
  • Terdtoon, P. 2022. “Thermal Performance of Various Adiabatic Section Lengths of Closed-Loop Pulsating Heat Pipe Designed for Energy Recovery Applications.” Energy Reports 8: 731–737. https://doi.org/10.1016/j.egyr.2022.10.149.
  • Valizadeh, R., A. Arman, and R. Ghobadian. 2023. “The Effect of the Pipe Angle and Protective Inclined Apron on the Scouring and Sedimentation Pattern Around a Semi-Buried Pipe in a 90° Mild Bend.” Ocean Engineering 286: 115711. https://doi.org/10.1016/j.oceaneng.2023.115711.
  • Wang, R., W. Cao, S. Wu, M. Jia, and X. Wang. 2023. “Optical Character Correction of Large-Curvature Annular Sector Text in Polar Coordinate System.” Pattern Recognition Letters 167: 157–163. https://doi.org/10.1016/j.patrec.2023.02.013.
  • Wang, G., C. Cong, X. Zheng, H. Li, F. Jiang, X. Wang, R. Li, et al. 2023. “Alignment of Fe3O4/CNT Electrodes via Magnetic Blade Printing for Wireless Stress-Direction-Recognizing Strain Sensor.” Chemical Engineering Journal 474: 145825. https://doi.org/10.1016/j.cej.2023.145825.
  • Wang, W., H. Yang, H. Zhang, T. Xu, F. Zhao, and S. Wu. 2023. “Pulsating Heat Pipe and Thermo-Electric Generator Jointly Applied in Renewable Energy Exploitation: Analytical and Experimental Investigations.” Energy 263: 125573. https://doi.org/10.1016/j.energy.2022.125573.
  • Wei Ke, Li, et al. 2021. “Discussion on the Construction Technology of DN1000 Ductile Cast Iron Pipe for Dragging Pipeline in Shanghai Beiheng River.” Engineering Technology Research 6 (17): 18–20.
  • Wenchao, Zu, and Yanan Gao. 2018. “Building Thermal Energy.” Ventilation and Air Conditioning 37 (01): 71–74.
  • Wu, Q., Z. Chen, Y. Ding, L. Yin, M. Yang, D. E. Erişen, T. Liu, M. Li, L. Yang, and S. Cui. 2023. “A Flexible Double Network Aerogel Reinforced by SiO2/ZrO2 Fibers Paper with Excellent Thermal Insulation at High-Temperature.” Ceramics International. https://doi.org/10.1016/j.ceramint.2023.09.283.
  • Xie, K., Y. Jin, Y. Peng, G. Liu, and B. Wan. 2021. “Research on High Quality Mesh Method of Armored Umbilical Cable for Deep sea Equipment.” Ocean Engineering 221: 108550. https://doi.org/10.1016/j.oceaneng.2020.108550.
  • Xu, Hong. 2019. “Analysis of Current Energy Consumption and Energy-Saving Technology of Central Heating.” Petrochemical Technology 26 (10): 221–223.