References
- Akbar, G. S., H. Salarian, and A. Ataei. 2019. A novel approach to integration of hot oil and combined heat and power systems through pinch technology and mathematical programming. Energy Sources Part A: Recovery Utilization and Environmental Effects 41 (24):3026–45. doi:10.1080/15567036.2019.1583695.
- Deng, C. F., Y. N. Li, Q. W. Meng, and J. Du. 2018. Preparation and catalytic performance of catalysts for hydrogenation of isopropyl acetate. Modern Chemical Industry 38 (3):165–68. doi:10.16606/j.cnki.issn0253-4320.2018.03.036.
- Du, J. G., L. Zhang, and Y. P. Deng. 2017. Research progress on different production processes of isopropyl acetate. Modern Chemical Industry 37 (9):52–56. doi:10.16606/j.cnki.issn0253-4320.2017.09.012.
- Gao, X. X., Q. R. Cheng, Y. Yang, K. R. Lu, and M. Y. Chen. 2022. Novel heat pump and heat integration assisted pressure swing distillation for separating methyl cyclohexane and n-butyl alcohol to save energy and reduce CO2 emissions. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 44 (4):9633–48. doi:10.1080/15567036.2022.2136794.
- Gao, X. X., M. Y. Chen, and T. Y. Wang. 2020. Design and optimization for the separation of a ternary methyl methacrylate-methanol-water mixture to save energy. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 1–10. doi:10.1080/15567036.2020.1829751.
- Han, Z., H. D. Li, and X. Gao. 2015. Process simulation of separation of isopropyl acetate-isopropanol mixture by pressure swing distillation with heat integration. Petrochemical Technology 44 (6):663–68. doi:10.3969/j.issn.1000-8144.2015.06.002.
- Kim, Y., J. H. Lim, J. Y. Shim, H. Lee, H. Cho, and J. Kim. 2022. Optimizing wastewater heat recovery systems in textile dyeing processes using pinch analysis. Applied Thermal Engineering 214:118880. doi:10.1016/j.applthermaleng.2022.118880.
- Li, H. 2022. Research on the construction of green and low carbon circular economy system in chemical industry under the goal of “double carbon”-A review of circular economy in chemical industry. Chemical Engineering 50 (1):4–5.
- Li, Y. L. 2006. Synthesis process and kinetics of isopropyl acetate from acetic acid and propylene. Nanjing: Nanjing Tech University. doi:10.7666/d.d023727.
- Li, D. H., Y. Li, X. Zheng, J. Wang, and W. Sun. 2022. Synthesis of heat exchanger network with complex phase transition based on pinch technology and carbon tax. IFAC-Papersonline 55 (7):418–423. doi:10.1016/j.ifacol.2022.07.479.
- Liu, Y. J., B. Wang, and G. F. Pan. 2018. Simulation and optimization of recovery process of isopropyl acetate. Modern Chemical Industry 38 (9):215–18. doi:10.16606/j.cnki.issn0253-4320.2018.09.049.
- Manizadeh, A., A. Entezari, and R. Ahmadi. 2018. The energy and economic target optimization of a naphtha production unit by implementing energy pinch technology. Case Studies in Thermal Engineering 12:396–404. doi:10.1016/j.csite.2018.06.001.
- Mistry, M., and R. Misener. 2016. Optimising heat exchanger network synthesis using convexity properties of the logarithmic mean temperature difference. Computers and Chemical Engineering 94:1–17. doi:10.1016/j.compchemeng.2016.07.001.
- Shafiee, M., J. Ali, A. H. Mohammadi, and M. Amirhamzeh. 2018. Simulation and energy optimization of the stabilizer tower of a pyrolysis gasoline hydrogenation unit. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 40 (14):1714–20. doi:10.1080/15567036.2018.1486901.
- Shao, Y. D., J. H. Hu, H. L. Li, and Z. D. Cai. 2020. Energy efficiency analysis of heat exchange network in isobutene purification unit. Chemical Progress 39 (S2):57–65. doi:10.16085/j.issn.1000-6613.2020-0720.
- Tavares, R., E. Monteiro, F. Tabet, and A. Rouboa. 2020. Numerical investigation of optimum operating conditions for syngas and hydrogen production from biomass gasification using aspen plus. Renewable Energy 146:1309–1314. doi:10.1016/j.renene.2019.07.051.
- Wang, C., Y. Zhuang, Y. Dong, L. Zhang, L. Liu, and J. Du. 2022. Design and control analysis of the side-stream extractive distillation column with low concentration intermediate-boiling entrainer. Chemical Engineering Science 247:116915. doi:10.1016/j.ces.2021.116915.
- Xie, L. M. 2016. Simulation and design of purification process of byproduct n-butanol in 1,4-butanediol production. Hangzhou: Zhejiang Universit.
- Yang, D. M., T. Li, and B. Q. Leng. 2020. Energy-saving technology of styrene unit based on mechanical vapor recompression coupled with organic Rankine cycle process. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 1–14. doi:10.1080/15567036.2020.1821127.
- Yang, D. M., C. Lou, M. Li, Y. Yun, and D. H. Wan. 2021. Study on energy saving of heat integrated distillation process for methyl acetate–methanol–tetrahydrofuran–water. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 1–17. doi:10.1080/15567036.2021.2017521.
- Zhang, X. L., and P. P. Song. 2019. Performance Assessment of Coal Fired Power Plant Integrated with calcium looping CO2 capture process. Energy Sources Part A: Recovery, Utilization, and Environmental Effects 45 (2):6096–117. doi:10.1080/15567036.2019.1673510.
- Zhang, J. M., A. Zhu, W. H. Xu, D. X. Li, Y. H. Zhang, Z. Y. Duan, and Y. Wang. 2021. Synthesis of isopropyl acetate by acetone method and its reaction mechanism. Chemical Engineering Research and Design 174:386–393. doi:10.1016/j.cherd.2021.08.003.
- Zhao, T. L., J. Li, H. Zhou, Z. H. Ma, and L. Y. Sun. 2018. A thermally coupled reactive distillation process to intensify the synthesis of isopropyl acetate. Chemical Engineering & Processing - Process Intensification 124:97–108. doi:10.1016/j.cep.2017.12.001.