Research on failure mechanism and support technology of fractured rock mass in an undersea gold mine

References

• An P. 2017. Ore-controlling model of permeability structures in fault zone, Sanshandao gold deposit, Shandong Province, China. Beijing: China University of Geosciences (Beijing).
   Google Scholar
• Barton N. 2002. Some new Q-value correlations to assist in site characterisation and tunnel design. Int J Rock Mech Min Sci. 39(2):185–216.
   Web of Science ®Google Scholar
• Barton N, Lien R, Lunde J. 1974. Engineering classification of rock masses for the design of tunnel support. Rock Mech. 6(4):189–236.
   Google Scholar
• Barton N, Løset F, Lien R, Lunde J. 1981. Application of Q-system in design decisions concerning dimensions and appropriate support for underground installations. In Subsurface space. Stockholm, Sweden: Elsevier; p. 553–561.
   Google Scholar
• Bieniawski ZT. 1978. Determining rock mass deformability: experience from case histories. Int J Rock Mech Min Sci Geomech Abstr. 15(5):237–247.
   Web of Science ®Google Scholar
• Bieniawski ZT. 1989. Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering. New York: John Wiley & Sons.
   Google Scholar
• Boon C. 2019. Study of reinforcement support mechanisms for wide-span horse-shoe-shaped openings in horizontally layered jointed rock using the distinct element method. Rock Mech Rock Eng. 52(4):1179–1191.
   Web of Science ®Google Scholar
• Bouzeran L, Furtney J, Pierce M, Hazzard J, Lemos J. 2017. Simulation of ground support performance in highly fractured and bulked rock masses with advanced 3DEC bolt model. In: Deep Mining 2017: Proceedings of the Eighth International Conference on Deep and High Stress Mining. Johannesburg: Australian Centre for Geomechanics; p. 667–680.
   Google Scholar
• Du S, Li D, Yu W, Zhang J, Liu F. 2020. Stability analysis and support control for a jointed soft rock roadway considering different lateral stresses. Geotech Geol Eng. 38(1):237–253.
   Web of Science ®Google Scholar
• Fenhua R, Xingping L, Meifeng C, Zhaohai L, Lei Z, Xin C, Libo L. 2008. Quantitative prediction and evaluation on the regularity of asymmetric damage and distortion upon broken rock mass roadways. Chin J Eng. 30(3):221–226.
   Google Scholar
• Grimstad E. 1993. Updating the Q-system for NMT. In: Proceedings of the International Symposium on Sprayed Concrete-Modern Use of Wet Mix Sprayed Concrete for Underground Support, Norwegian Concrete Association, 1993. Fagemes, Oslo, Norway.
   Google Scholar
• He MC, Xie HP, Peng SP, Jiang YD. 2005. Study on rock mechanics in deep mining engineering. Chin J Rock Mech Eng. 24(16):2803–2813.
   Google Scholar
• Hoek E, Diederichs MS. 2006. Empirical estimation of rock mass modulus. Int J Rock Mech Min Sci. 43(2):203–215.
   Web of Science ®Google Scholar
• Hou C. 2013. Ground control of roadways. Xuzhou: China University of Mining and Technology Press.
   Google Scholar
• Hu X, Fang Y, Walton G, He C. 2019. Analysis of the behaviour of a novel support system in an anisotropically jointed rock mass. Tunn. Undergr. Space Technol. 83:113–134.
   Web of Science ®Google Scholar
• Kang H, Jiang P, Cai J. 2014. Test and analysis on stress fields caused by rock bolting. Journal of China Coal Society. 39(8):1521–1528.
   Google Scholar
• Kang H, Wang J. 2007. Rock bolting theory and complete technology for coal roadways. Beijing: China Coal Industry Publishing House.
   Google Scholar
• Li G, Ma F, Guo J, Zhao H, Liu G. 2020. Study on deformation failure mechanism and support technology of deep soft rock roadway. Eng Geol. 264(March):105262.
   Google Scholar
• Li J, Kang H, Gao F, Lou J. 2020. Analysis of bolt support stress field and bolt support effect under in-situ stress field. J China Coal Soc. 45(s1):99–109.
   Google Scholar
• Li S, Wang L, Lu Y. 2011. Numeriacl simulation for deformation failure characters in roadway with broken rock mass. J. Min. Saf. Eng. 28(1):39–44.
   Google Scholar
• Liang X, Tang SB, Tang CA, Hu LH, Chen F. 2023. Influence of water on the mechanical properties and failure behaviors of sandstone under triaxial compression. Rock Mech Rock Eng. 56(2):1131–1162.
   Web of Science ®Google Scholar
• Lowson AR, Bieniawski ZT. 2013. Critical assessment of rmr-based tunnel design practices: a practical engineer’s approach. Proceedings – Rapid Excavation and Tunneling Conference (June):180–198.
   Google Scholar
• Małkowski P, Ostrowski L, Bachanek P. 2017a. Modelling the small throw fault effect on the stability of a mining roadway and its verification by in situ investigation. Energies 10(12):2082.
   Web of Science ®Google Scholar
• Małkowski P, Ostrowski L, Bachanek P. 2017b. The impact of the low throw fault on the stability of roadways in a hard coal mine. Stud. Geotech. Mech. 39(1):63–72.
   Google Scholar
• Marinos P, Hoek E. 2000. GSI: a geologically friendly tool for rock mass strength estimation. In: ISRM International Symposium. Melbourne: International Society for Rock Mechanics and Rock Engineering.
   Google Scholar
• Marinos V. 2014. Tunnel behaviour and support associated with the weak rock masses of flysch. J Rock Mech Geotech Eng. 6(3):227–239.
   Google Scholar
• Miao S, Wan L, Lai X, Wang S. 2004. Relation analysis between in-situ stress field and geological tectonism in Sanshandao gold mine. Chin J Rock Mech Eng. 23(23):3996–3999.
   Google Scholar
• Miao SJ, Cai MF, Guo QF, Huang ZJ. 2016. Rock burst prediction based on in-situ stress and energy accumulation theory. Int J Rock Mech Min Sci. 83:86–94.
   Web of Science ®Google Scholar
• Mitri HS, Edrissi R, Henning JG. 1995. Finite-element modeling of cable-bolted stopes in hard-rock underground mines. Trans Soc Min Metall Explor Inc. 298:1897–1902.
   Google Scholar
• Nicholson GA, Bieniawski ZT. 1990. A nonlinear deformation modulus based on rock mass classification. Int J Min Geol Eng. 8(3):181–202.
   Google Scholar
• Read SAL, Perrin ND, Richards LR. 1999. Applicability of the Hoek-Brown failure criterion to New Zealand greywacke rocks. In 9th ISRM Congress. Paris: international Society for Rock Mechanics and Rock Engineering.
   Google Scholar
• Rocscience. 2022. RocData. Rocscience Inc.
   Google Scholar
• Rocscience. 2022. RS2. Rocscience Inc.
   Google Scholar
• Senent S, Mollon G, Jimenez R. 2013. Tunnel face stability in heavily fractured rock masses that follow the Hoek-Brown failure criterion. Int J Rock Mech Min Sci. 60:440–451.
   Web of Science ®Google Scholar
• Serafim JL. 1983. Consideration of the geomechanical classification of Bieniawski. In Proc int symp on engineering geology and underground construction. Vol. 1. Lisbon; p. 33–44.
   Google Scholar
• Sonmez H, Gokceoglu C, Ulusay R. 2004. Indirect determination of the modulus of deformation of rock masses based on the GSI system. Int J Rock Mech Min Sci. 41(5):849–857.
   Web of Science ®Google Scholar
• Tang SB, Li JM, Ding S, Zhang LT. 2022. The influence of water‑stress loading sequences on the creep behavior of granite. Bull Eng Geol Environ. 81(11):482.
   Web of Science ®Google Scholar
• Toraño J, Dı́ez R, Rivas Cid JM, Barciella M. 2002. FEM modeling of roadways driven in a fractured rock mass under a longwall influence. Comput Geotech. 29(6):411–431.
   Web of Science ®Google Scholar
• Verman M, Singh B, Viladkar MN, Jethwa JL. 1997. Effect of tunnel depth on modulus of deformation of rock mass. Rock Mech Rock Engng. 30(3):121–127.
   Web of Science ®Google Scholar
• Wang GJ. 2005. Mechanical state of jointed rock mass and support structure of large tunnel during construction process. Chin J Rock Mech Eng. 24(8):1328–1334.
   Google Scholar
• Wang Y, Zhu C, He MC, Wang X, Le HL. 2022. Macro-meso dynamic fracture behaviors of Xinjiang marble exposed to freeze thaw and frequent impact disturbance loads: a lab-scale testing. Geomech Geophys Geo-Energ Geo-Resour. 8(5):154.
   Web of Science ®Google Scholar
• Zhu C, Xu XD, Wang XT, Xiong F, Tao ZG, Lin Y, Chen J. 2019. Experimental investigation on nonlinear flow anisotropy behavior in fracture media. Geofluids 2019(9):1–9. article ID: 5874849.
   Google Scholar