Stability analysis and support requirements for haulage drift in the vicinity of mined stopes

References

• Abdellah W, Mitri HS, Thibodeau D. 2011. Assessment of mine haulage drift safety using probabilistic methods of analysis. Procedia Eng. 26:2099–2111. doi: 10.1016/j.proeng.2011.11.2412.
   Google Scholar
• Aydan O, Dalgic S. 1998. Prediction of deformation behavior of 3-lanes Bolu tunnels through squeezing rocks of North Anatolian fault zone (NAFZ). Proc. Reg. Symp. on Sedimentary Rock Engng; p. 228–233.
   Google Scholar
• Barton N, Lien R, Lunde J. 1974. Engineering classification of rock masses for the design of tunnel support. Rock Mech. 6(4):189–236. doi: 10.1007/BF01239496.
   Google Scholar
• Barton N. 2002. Some new Q-value correlations to assist in site characterisation and tunnel design. Int J Rock Mech Min Sci. 39(2):185–216. doi: 10.1016/S1365-1609(02)00011-4.
   Web of Science ®Google Scholar
• Bieniawski ZT. 1973. Engineering classification of jointed rock masses. Trans S Afr Inst Civil Eng. 15:335–344.
   Google Scholar
• Bieniawski ZT. 1989. Engineering rock mass classifications: a complete manual for engineers and geologists in mining, civil, and petroleum engineering. New York (NY): Wiley; p. 45–61.
   Google Scholar
• Cai M, Lai X. 2003. Monitoring and analysis of nonlinear dynamic damage of transport roadway supported by composite hard rock materials in Linglong gold mine. Int J Miner Metall Mater. 10(2):10–15.
   Google Scholar
• Diederichs MS, Kaiser PK. 1999. Tensile strength and abutment relaxation as failure control mechanisms in underground excavations. Int J Rock Mech Min Sci. 36(1):69–96. doi: 10.1016/S0148-9062(98)00179-X.
   Web of Science ®Google Scholar
• Eberhardt E. 2001. Numerical modelling of three-dimension stress rotation ahead of an advancing tunnel face. Int J Rock Mech Min Sci. 38(4):499–518. doi: 10.1016/S1365-1609(01)00017-X.
   Web of Science ®Google Scholar
• Grimstad E. 1993. Updating of the Q-system for NMT. Proceedings of the International Symposium on Sprayed Concrete-Modern Use of Wet Mix Sprayed Concrete for Underground Support.
   Google Scholar
• Hoek E, Brown ET. 1997. Practical estimates of rock mass strength. Int J Rock Mech Min Sci. 34(8):1165–1186. doi: 10.1016/S1365-1609(97)80069-X.
   Web of Science ®Google Scholar
• Hoek E, Carranza-Torres C, Corkum B. 2002. Hoek-Brown failure criterion-2002 edition. Proceedings of the North American Rock Mechanics Society; Toronto.
   Google Scholar
• Hoek E, Diederichs MS. 2006. Empirical estimation of rock mass modulus. Int J Rock Mech Min Sci. 43(2):203–215. doi: 10.1016/j.ijrmms.2005.06.005.
   Web of Science ®Google Scholar
• Hoek E, Kaiser PK, Bawden WF. 1995. Support of underground excavations in hard rock. Rotterdam: Balkema; p. 34–41.
   Google Scholar
• ISRM. 1981. Rock characterization, testing and monitoring. In: Brown ET, editor. ISRM, suggested methods. Oxford: Pergamon Press; p. 245–267.
   Google Scholar
• Kalamaras GS, Bieniawski ZT. 1993. A rock mass strength concept for coal seams. Proceedings of 12th Conference Ground Control in Mining; Morgantown; p. 274–283.
   Google Scholar
• Li W, Chen C. 2003. Extraction technology of ocean mining. China Mining Mag. 12(1):44–46, 51.
   Google Scholar
• Li X, Li D, Liu Z, Zhao G, Wang W. 2013. Determination of the minimum thickness of crown pillar for safe exploitation of a subsea gold mine based on numerical modeling. Int J Rock Mech Min Sci. 57(2):42–56. doi: 10.1016/j.ijrmms.2012.08.005.
   Google Scholar
• Li XB, Liu ZX, Peng K. 2010. Theory and practice of rock mechanics related to exploitation of undersea metal mine. Chinese J Rock Mech Eng. 29(10):1945–1953.
   Google Scholar
• Liu Z, Dang W, He X. 2012. Undersea safety mining of the large gold deposit in Xinli District of Sanshandao Gold Mine. Int J Miner Metall Mater. 19(7):574–583. doi: 10.1007/s12613-012-0598-y.
   Google Scholar
• Lowson AR, Bieniawski ZT. 2013. Critical assessment of RMR based tunnel design practices: a practical engineer’s approach. Proceedings of the SME, Rapid Excavation and Tunnelling Conference; Washington, DC, USA; Vol. 6; p. 23–26.
   Google Scholar
• Lv J, Wan Z, Yang Y, Wang J, Zhang Y, Liu S. 2022. Failure characteristics and stability control technology of dynamic pressure roadway affected by the mining activity: a case study. Eng Fail Anal. 131:105857. doi: 10.1016/j.engfailanal.2021.105857.
   Web of Science ®Google Scholar
• Marinos P, Hoek E. 2000. GSI: a geologically friendly tool for rock mass strength estimation. ISRM International Symposium. Lisbon: International Society for Rock Mechanics and Rock Engineering.
   Google Scholar
• Musunuri A, Mitri H, Thibodeau D. 2010. Stochastic analysis of haulage drift stability using numerical modelling. ISRM. International Symposium-Asian Rock Mechanics Symposium. ISRM, ISRM-ARMS6-2010-143.
   Google Scholar
• Potvin Y, Hadjigeorgiou J, Wesseloo J. 2019. Towards optimising ground support systems in underground mines. Ground Support 2019: Proceedings of the Ninth International Symposium on Ground Support in Mining and Underground Construction. Australian Centre for Geomechanics; p. 493–502. doi: 10.36487/ACG_rep/1925_35_Potvin.
   Google Scholar
• Raju GD, Mitri H, Thibodeau D, Moreau-Verlaan L. 2015. Numerical modelling and in situ monitoring of drift support performance with respect to mining sequence. Int J Min Reclam Environ. 29(2):83–95. doi: 10.1080/17480930.2013.815400.
   Web of Science ®Google Scholar
• Ramamurthy T. 2004. A geo-engineering classification for rocks and rock masses. Int J Rock Mech Min Sci. 41(1):89–101. doi: 10.1016/S1365-1609(03)00078-9.
   Web of Science ®Google Scholar
• Rashad SM, Hammad FH. 2000. Nuclear power and the environment: comparative assessment of environmental and health impacts of electricity-generating systems. Appl Energy. 65(1–4):211–229. doi: 10.1016/S0306-2619(99)00069-0.
   Web of Science ®Google Scholar
• Read SAL, Richards LR, Perrin ND. 1999. Applicability of the Hoek–Brown failure criterion to New Zealand greywacke rocks. Proceedings of the 9th International Society for Rock Mechanics Congress; Paris, France; p. 25–28.
   Google Scholar
• Rocscience Inc. 2005. Underground wedge stability analysis; UNWEDGE version 3.009. Toronto: Rocscience Inc.
   Google Scholar
• Rocscience Inc. 2020. RS2-2D geotechnical finite element analysis. Toronto: Rocscience Inc.
   Google Scholar
• Rona PA. 2003. Resources of the sea floor. Science. 299(5607):673–674. doi: 10.1126/science.1080679.
   PubMed Web of Science ®Google Scholar
• Serafim JL, Pereira JP. 1983. Considerations of the geomechanics classification of Bieniawski. Proceedings of the International Symposium on Engineering Geology and Underground Construction LNEC. Rotterdam: Balkema.
   Google Scholar
• Sheory PR. 1997. Empirical rock failure criterion. Oxford IBH Publishing Co.; A.A. Balkema; p. 176.
   Google Scholar
• Singh S. 1997. [Time-dependent deformation modulus of rocks in tunnels] [ME thesis]. Roorkee: Civil Engineering Department, University of Roorkee; p. 180.
   Google Scholar
• Skrzypkowski K, Zagórski K, Zagórska A, Apel DB, Wang J, Xu H, Guo L. 2022. Choice of the arch yielding support for the preparatory roadway located near the fault. Energies. 15(10):3774. doi: 10.3390/en15103774.
   Web of Science ®Google Scholar
• Skrzypkowski K. 2020. Case studies of rock bolt support loads and rock mass monitoring for the room and pillar method in the Legnica-Głogów copper district in Poland. Energies. 13(11):2998. doi: 10.3390/en13112998.
   Web of Science ®Google Scholar
• Sonmez H, Gokceoglu C, Ulusay R. 2004. Indirect determination of the modulus of deformation of rock masses based on the GSI system. Int J Rock Mech Min Sci. 41(5):849–857. doi: 10.1016/j.ijrmms.2003.01.006.
   Web of Science ®Google Scholar
• Yan B, Jia H, Yang Z, Yilmaz E, Liu H. 2023. Goaf instability in an open pit iron mine triggered by dynamics disturbance: a large-scale similar simulation. Int J Min Reclam Environ. 37(8):606–629. doi: 10.1080/17480930.2023.2233866.
   Web of Science ®Google Scholar
• Yan B, Jia H, Yilmaz E, Lai X, Shan P, Hou C. 2022. Numerical study on microscale and macroscale strength behaviors of hardening cemented paste backfill. Constr Build Mater. 321:126327. doi: 10.1016/j.conbuildmat.2022.126327.
   Web of Science ®Google Scholar
• Zhang Y, Mitri HS. 2008. Elastoplastic stability analysis of mine haulage drift in the vicinity of mined stopes. Int J Rock Mech Min Sci. 45(4):574–593. doi: 10.1016/j.ijrmms.2007.07.020.
   Web of Science ®Google Scholar