References
- Ezugwu EO, Wang ZM. Titanium alloy and their machinability-a review. J Mater Process Technol. 1997;68(3):262–274.
- Chen Q, Thouas GA. Metallic implant biomaterials. Mater Sci Eng. 2015;R87:1–57.
- Guu YH, Hocheng H. Electric discharge machining. Advan Analys of Non-tradition Mach. 2013;6:65–106.
- Prasanna J, Karunamoorthy L, Raman MV, et al. Optimization of process parameters of small hole dry drilling in Ti-6Al-4V using Taguchi and grey relational analysis. Measur. 2014;48:346–354.
- Panda DK, Bhol RK. Analysis of spark eroded crater formed under growing plasma channel in electro-discharge machining. Mach Sci Technol. 2005;9(2):239–261.
- Masuzawa T. State of the art of micro machining. CIRP Annals Manuf Technol. 2000;49(2):473–488.
- Singh N, Bharti PS. A review on micro electric discharge machining of titanium alloys. Mater Today Proceed. 2020;25:742–750.
- Liu Q, Zhang Q, Zhang M, et al. Review of size effect in micro electric discharge machining. Precis Eng. 2016;44:29–40.
- Wang BJ, Saka N, Rabinowich E. Static gap erosion of Ag-Cdo electrodes. IEEE Transact on Comp Hybr Manuf Technol. 1991;14(2):374–385
- Gangil M, Pradhan MK. Optimization of machining parameters of EDM for performance characteristics using RSM and GRA. J Mech Eng and Biomech. 2018;2(4):27–33
- Chakraborty S, Mitra S, Bose D. Optimisation of machining performance in PMWEDM of titanium alloy using the hybrid technique (GRA-PCA). Advan Mat Process Technol. 2020; DOI:10.1080/2374068X.2020.1860500
- Karthikeyan R, Kumar VS, Punitha A, et al. An integrated ANN - GA approach to maximize the material removal rate and to minimize the surface roughness of wire cut EDM on Titanium alloy. Advan Mat Process Technol. 2020; DOI:10.1080/2374068X.2020.1793267
- Rupajati P, Soepangkat BOP, Pramujati B, et al., Optimization of recast layer thickness and surface roughness in the wire EDM process of AISI H13 tool steel using taguchi and fuzzy logic. 2014;Appl Mechan Mater. 493:529–534.
- Dewangan S, Gangopadhyay S, Biswas CK. Study of surface integrity and dimensional accuracy in EDM using fuzzy TOPSIS and sensitivity analysis. Measur. 2015;63:364–376.
- Dewangan S, Gangopadhyay S, Biswas CK. Multi-response optimization of surface integrity characteristics of EDM process using grey-fuzzy logic-based hybrid approach. Eng Sci Technol. 2015;18:361–368.
- Shirguppikar SS, Patil MS. Experimental investigation on micro-electro discharge machining process using tungsten carbide and titanium nitride-coated micro-tool electrode for machining of Ti-6Al-4V. Advan Mat Process Technol. 2020; DOI:10.1080/2374068X.2020.1833399
- Kumar K, Singh V, Katyal P, et al. EDM μ-drilling in Ti-6Al-7Nb: experimental investigation and optimization using NSGA-II. Int J Advan Manuf Technol. 2019;104:2727–2738.
- Montgomery DC. Design & analysis of experiments. New York: Wiley; 2001.
- Tzeng Y, Chen F. Multi-objective optimization of high speed electrical discharge machining process using a Taguchi fuzzy-based approach. Mater Desig. 2007;28(4):11.