References
- Akinlabi ET, Ikumapayi OM, Osinubi AS, et al. Characterizations of AA5083-H116 produced by friction stir spot welding technique. Adv Mater Process Technol. 2022;2022:1–15.
- Sharma C, Tripathi A, Upadhyay V, et al. Friction stir spot welding-process and weld properties: a review. J Institut Eng. 2021;102(2):549–565.
- Singh S, Satsangi PS. A review on friction stir spot welding of similar and dissimilar materials. Adv Eng Design. 2021;2021:531–541.
- Zlatanovic DL, Balos S, Bergmann JP, et al. In-depth microscopic characterisation of the weld faying interface revealing stress-induced metallurgical transformations during friction stir spot welding. Int J Machine Tools Manuf. 2021;164:103716.
- Basma B, Mansour H, Gaafer M. Optimization of friction stir spot welding process parameters on the microstructure and shear load by Taguchi method. Eng Res J. 2021;45(1):1–6.
- Mehrez S, Paidar M, Cooke K, et al. A comparative study on weld characteristics of AA5083-H112 to AA6061-T6 sheets produced by MFSC and FSSW processes. Vacuum. 2021;2021:110298.
- Gerlich A, Su P, North TH. Tool penetration during friction stir spot welding of Al and Mg alloys. J Mater Sci. 2005;40(24):6473–6481.
- Bozzi S, Helbert-Etter AL, Baudin T, et al. Influence of FSSW parameters on fracture mechanisms of 5182 aluminium welds. J Mater Process Technol. 2010;210(11):1429–1435.
- Tozaki Y, Uematsu Y, Tokaji K. Effect of tool shoulder diameter on mechanical properties of friction stir spot welded joints. Trans Jpn Soc Mech Eng A. 2008;74:268–274.
- Patel VV, Sejani DJ, Patel NJ, et al. Effect of tool rotation speed on friction stir spot welded AA5052-H32 and AA6082-T6 dissimilar aluminum alloys. Metallogr Microstruct Anal. 2016;5(2):142–148.
- Asmael MBA, Glaissa MAA. Effects of rotation speed and dwell time on the mechanical properties and microstructure of dissimilar aluminum‐titanium alloys by friction stir spot welding (FSSW). Materialwissenschaft Werkstofftechnik. 2020;51(7):1002–1008.
- Li G, Zhou L, Zhou W, et al. Influence of dwell time on microstructure evolution and mechanical properties of dissimilar friction stir spot welded aluminum–copper metals. J Mater Res Technol. 2019;8(3):2613–2624.
- Singh S, Singh A, Singh I, et al. Optimization of the process parameters for drilling of metal matrix composites (MMC) using Taguchi analysis. In: Advanced materials research. Vol. 410. Trans Tech Publications Ltd; 2012. p. 249–252.
- Nasir T, Kalaf O, Asmael M. Effect of rotational speed, and dwell time on the mechanical properties and microstructure of dissimilar AA5754 and AA7075-T651 aluminum sheet alloys by friction stir spot welding. Mater Sci. 2021;27(3):308–312.
- Xie X, Shen J, Gong F, et al. Effects of dwell time on the microstructures and mechanical properties of water bath friction stir spot-welded AZ31 magnesium alloy joints. Int J Adv Manufact Technol. 2016;82(1):75–83.
- Karthikeyan R, Balasubramanian V. Predictions of the optimized friction stir spot welding process parameters for joining AA2024 aluminum alloy using RSM. Int J Adv Manufact Technol. 2010;51(1):173–183.
- Karaboga D, Kaya E. Adaptive network based fuzzy inference system (ANFIS) training approaches: a comprehensive survey. Artif Intell Rev. 2019;52(4):2263–2293.