Modeling and optimisation of magnetic field assisted electrochemical spark drilling using hybrid technique

References

• Basak I, Ghosh A. Mechanism of spark generation during electrochemical discharge machining: a theoretical model and experimental verification. J Mater Process Technol. 1996;62(1–3):46–53 doi:10.1016/0924-0136(95)02202-3.
   Web of Science ®Google Scholar
• Shamim FA, Dvivedi A, Kumar P. On near-dry wire ECDM of Al6063/SiC/10p MMC. Mater Manuf Process. 2021;36(1):122–134 doi:10.1080/10426914.2020.1802044.
   Web of Science ®Google Scholar
• Prashanth P, Hiremath SS. Machinability study and characterisation of holes machined using mechanical micromachining technique-micro drilling. Adv Mater Process Technol. 2019;5(2):226–241.
   Google Scholar
• Jha NK, Singh T, Dvivedi A, et al. Experimental investigations into triplex hybrid process of GA-RDECDM during subtractive processing of MMC’s. Mater Manuf Process. 2019;34(3):243–255 doi:10.1080/10426914.2018.1512126.
   Web of Science ®Google Scholar
• Jiang B, Lan S, Ni J, et al. Experimental investigation of spark generation in electrochemical discharge machining of non-conducting materials. J Mater Process Technol. 2014;214(4):892–898 doi:10.1016/j.jmatprotec.2013.12.005.
   Web of Science ®Google Scholar
• Goud M, Sharma AK, Jawalkar C. A review on material removal mechanism in electrochemical discharge machining (ECDM) and possibilities to enhance the material removal rate. Precis Eng. 2016;45:1–7 doi:10.1016/j.precisioneng.2016.01.007.
   Web of Science ®Google Scholar
• Behroozfar A, Razfar MR. Experimental study of the tool wear during the electrochemical discharge machining (ECDM). Mater Manuf Processes. 2016;31:574–580 doi:10.1080/10426914.2015.1004685.
   Web of Science ®Google Scholar
• Gautam N, Jain VK. Experimental investigations into ECSD process using various tool kinematics. Int J Mach Tool Manuf. 1998;38(1–2):15–27 doi:10.1016/S0890-6955(98)00034-0.
   Web of Science ®Google Scholar
• Wüthrich R, Despont B, Maillard P, et al. Improving the material removal rate in spark-assisted chemical engraving (SACE) gravity-feed micro-hole drilling by tool vibration. J Micromech Microeng. 2006;16(11):N28 doi:10.1088/0960-1317/16/11/N03.
   Web of Science ®Google Scholar
• Kumar S, Dvivedi A. On effect of tool rotation on performance of rotary tool micro-ultrasonic machining. Mater Manuf Process. 2019;34(5):475–486 doi:10.1080/10426914.2018.1512130.
   Web of Science ®Google Scholar
• Yang CT, Song SL, Yan BH, et al. Improving machining performance of wire electrochemical discharge machining by adding SiC abrasive to electrolyte. Int J Mach Tool Manuf. 2006 Dec 1;46(15):2044–2050. DOI:10.1016/j.ijmachtools.2006.01.006
   Web of Science ®Google Scholar
• Singh T, Dvivedi A. Developments in electrochemical discharge machining: a review on electrochemical discharge machining, process variants and their hybrid methods. Int J Mach Tool Manuf. 2016;105:1–3 doi:10.1016/j.ijmachtools.2016.03.004.
   Web of Science ®Google Scholar
• Charak A, Jawalkar CS. Experimental investigation and analysis on borosilicate glass using electrochemical discharge machining process. Silicon. 2022;14(4):1823–1829 doi:10.1007/s12633-021-00980-1.
   Web of Science ®Google Scholar
• Zheng ZP, Su HC, Huang FY, et al. The tool geometrical shape and pulse-off time of pulse voltage effects in a Pyrex glass electrochemical discharge micro-drilling process. J Micromech Microeng. 2007;17(2):265 doi:10.1088/0960-1317/17/2/012.
   Web of Science ®Google Scholar
• Bhattacharyya B, Doloi BN, Sorkhel SK. Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials. J Mater Process Technol. 1999;95(1–3):145–154 doi:10.1016/S0924-0136(99)00318-0.
   Web of Science ®Google Scholar
• Chak SK, Venkateswara Rao P. The drilling of Al2O3 using a pulsed DC supply with a rotary abrasive electrode by the electrochemical discharge process. Int J Adv Manuf Technol. 2008;39(7):633–641 doi:10.1007/s00170-007-1263-x.
   Web of Science ®Google Scholar
• Han MS, Min BK, Lee SJ. Geometric improvement of electrochemical discharge micro-drilling using an ultrasonic-vibrated electrolyte. J Micromech Microeng. 2009 May 18;19(6):065004. DOI:10.1088/0960-1317/19/6/065004
   Web of Science ®Google Scholar
• Elhami S, Razfar MR. Effect of ultrasonic vibration on the single discharge of electrochemical discharge machining. Mater Manuf Processes. 2017;33(4): 1–8 doi:10.1080/10426914.2017.1328113.
   Web of Science ®Google Scholar
• Jafferson JM, Hariharan P, Ram Kumar J. Effects of ultrasonic vibration and magnetic field in micro-EDM milling of nonmagnetic material. Mater Manuf Process. 2014;29(3):357–363 doi:10.1080/10426914.2013.872268.
   Web of Science ®Google Scholar
• Rathore RS, Dvivedi A. Sonication of tool electrode for utilizing high discharge energy during ECDM. Mater Manuf Process. 2020;35(4):415–429 doi:10.1080/10426914.2020.1718699.
   Web of Science ®Google Scholar
• Huang SF, Liu Y, Li J, et al. Electrochemical discharge machining micro-hole in stainless steel with tool electrode high-speed rotating. Mater Manuf Process. 2014;29(5):634–637 doi:10.1080/10426914.2014.901523.
   Web of Science ®Google Scholar
• Cheng CP, Wu KL, Mai CC, et al. Magnetic field-assisted electrochemical discharge machining. J Micromech Microeng. 2010;20(7):075019 doi:10.1088/0960-1317/20/7/075019.
   Web of Science ®Google Scholar
• Hajian M, Razfar MR, Movahed S. An experimental study on the effect of magnetic field orientations and electrolyte concentrations on ECDM milling performance of glass. Precis Eng. 2016;45:322–331 doi:10.1016/j.precisioneng.2016.03.009.
   Web of Science ®Google Scholar
• Rattan N, Mulik RS. Improvement in material removal rate (MRR) using magnetic field in TW-ECSM process. Mater Manuf Process. 2017;32(1):101–107 doi:10.1080/10426914.2016.1176197.
   Web of Science ®Google Scholar
• Rattan N, Mulik RS. Experimental investigations and multi-response optimization of silicon dioxide (quartz) machining in magnetic field assisted TW-ECSM process. Silicon. 2017;9(5):663–673 doi:10.1007/s12633-016-9521-x.
   Web of Science ®Google Scholar
• Rattan N, Mulik RS. Experimental set up to improve machining performance of silicon dioxide (quartz) in magnetic field assisted TW-ECSM process. Silicon. 2018 Nov;10(6):2783–2791 doi:10.1007/s12633-018-9818-z.
   Web of Science ®Google Scholar
• Xu Y, Jiang B. Machining performance enhancement of deep micro drilling using electrochemical discharge machining under magnetohydrodynamic effect. Int J Adv Manuf Technol. 2021;113(3):883–892 doi:10.1007/s00170-021-06657-8.
   Web of Science ®Google Scholar
• Harugade M, Waigaonkar S, Kulkarni G, et al. Experimental investigations of magnetic field-assisted high-speed electrochemical discharge drilling. Mater Manuf Processes. 2021;1–12. DOI:10.1080/10426914.2021.2016814
   Web of Science ®Google Scholar
• Rajput V, Goud M, Suri NM. Performance analysis of closed-loop electrochemical discharge machining (CLECDM) during micro-drilling and response surface methodology based multi-response parametric optimisation. Adv Mater Process Technol. 2021 7 ;1–31 doi:10.1080/2374068X.2020.1860494.
   Google Scholar
• Bindu MJ, Somashekhar SH. Machining of microholes on borosilicate glass using micro-electro chemical discharge machining (µ-ECDM) and parametric optimisation. Adv Mat Proc Tech. 2019;5:542–557.
   Google Scholar
• Panda MC, Yadava V. Intelligent modeling and multiobjective optimization of die sinking electrochemical spark machining process. Mater Manuf Process. 2012;27(1):10–25 doi:10.1080/10426914.2010.544812.
   Web of Science ®Google Scholar
• Bhuyan BK, Yadava V. Experimental modelling and multi-response optimization of travelling wire electrochemical spark machining of Pyrex glass. Proc Inst Mech Eng B J Eng Manuf. 2014;228(8):902–916 doi:10.1177/2F0954405413514745.
   Web of Science ®Google Scholar
• Bhuyan BK, Bhuyan P, Mishra S. Modeling and response optimization of traveling wire electro-chemical spark machining of borosilicate glass using hybrid approach. J Adv Manuf Syst. 2020;19(03):425–447 doi:10.1142/S0219686720500213.
   Google Scholar
• Singh M, Singh S, Kumar S. Environmental aspects of various electrolytes used in electrochemical discharge machining process. J Braz Soc Mech Sci Eng. 2020;42(8):1 doi:10.1007/s40430-020-02492-2.
   Web of Science ®Google Scholar
• Singh M, Singh S, Kumar S. Experimental investigation for generation of micro-holes on silicon wafer using electrochemical discharge machining process. Silicon. 2020;12(7):1683–1689 doi:10.1007/s12633-019-00273-8.
   Web of Science ®Google Scholar
• Behroozfar A, Razfar MR. Experimental and numerical study of material removal in electrochemical discharge machining (ECDM). Mater Manuf Process. 2016;31(4):495–503 doi:10.1080/10426914.2015.1058951.
   Web of Science ®Google Scholar
• Jain VK, Dixit PM, Pandey PM. On the analysis of the electrochemical spark machining process. Int J Mach Tool Manuf. 1999;39(1):165–186 doi:10.1016/S0890-6955(98)00010-8.
   Web of Science ®Google Scholar
• Ross PJ. Taguchi technique for quality engineering. New York: McGraw-Hill; 1988.
   Google Scholar
• Kumar Singh G, Yadava V, Kumar R. Multi response optimization of electro-discharge diamond face grinding process using robust design of experiments. Mater Manuf Process. 2010;25(8):851–856 doi:10.1080/10426910903536758.
   Web of Science ®Google Scholar
• Box GE, Behnken DW. Some new three level designs for the study of quantitative variables. Technometrics. 1960;2(4):455–475 doi:10.1080/00401706.1960.10489912.
   Google Scholar
• Bellubbi S, Mallick B. Multi response optimization of ECDM process parameters for machining of microchannel in silica glass using taguchi–GRA technique. Silicon. 2021;1–5 doi:10.1007/s12633-021-01167-4.
   Web of Science ®Google Scholar
• Malik A, Manna A. An experimental investigation on developed WECSM during micro slicing of e-glass fibre epoxy composite. Int J Adv Manuf Technol. 2016;85(9):2097–2106 doi:10.1007/s00170-016-8858-z.
   Web of Science ®Google Scholar
• Antil P, Singh S, Manna A. Experimental investigation during electrochemical discharge machining (ECDM) of hybrid polymer matrix composites. Iran J Sci Technol - Trans Electr. 2020;44(3):813–824 doi:10.1007/s40997-019-00280-5.
   Web of Science ®Google Scholar
• Teimouri R, Baseri H. Study of tool wear and overcut in EDM process with rotary tool and magnetic field. Adv Tribol. 2012;2012 doi:10.1155/2012/895918.
   Google Scholar
• Chen J, Zhang ZM, Tian XT, et al. An approach to partner selection in virtual enterprises based on grey relational analysis. Proc Inst Mech Eng B J Eng Manuf. 2011;225(12):2296–2301 doi:10.1177/2F0954405411408947.
   Google Scholar
• Panda S, Mishra D, Biswal BB. Determination of optimum parameters with multi-performance characteristics in laser drilling—a grey relational analysis approach. Int J Adv Manuf Technol. 2011;54(9):957–967 doi:10.1007/s00170-010-2985-8.
   Web of Science ®Google Scholar
• Mishra S, Yadava V. Modeling and optimization of laser beam percussion drilling of thin aluminum sheet. Opt Laser Technol. 2013;48:461–474 doi:10.1016/j.optlastec.2012.10.035.
   Web of Science ®Google Scholar