References
- Avinash Malladi KK DMLS – an insight for unproblematic production. Mater Today Proc. 2021 37(2):1986–1990.
- Kedar Mallik M, Srinivasa Rao C, Kesava Rao VVS, et al. Effect of heat treatment on corrosion behavior of weld deposited Co-Cr-Mo alloy. ARPN J Eng Appl Sci. 2016;11(20):12188-12191.
- Kedar Mallik M, Srinivasa Rao C, Kesava Rao VVS, et al. Effect of process parameters on the tensile properties of LENS deposited Co-Cr-Mo alloy. Int J Manuf Technol Manag. 2018;32(6):509–516.
- Girardin E, Barucca G, Mengucci P, et al. ‘Biomedical Co-Cr-Mo components produced by direct metal laser sintering’. Mater Today Proc. 2016;3:889–897.
- Mantrala KM, Das M, Balla VK, et al. Additive manufacturing of Co-Cr Mo alloy: influence of heat treatment on microstructure, tribological, and electrochemical properties. March, Article 2. Comput Aided Digital Manuf Technol. 2015;1(1):4–10.
- Thakura A, Mehlwalb S, Minhasa N, et al. Influence of tool rotational speed on the microstructural characterization and mechanical properties of friction stir welded Al-Si10Mg parts produced by DMLS additive manufacturing process’. Mater Sci Eng B. 2022 April;278:115612.
- Mantrala KM, Das M, Balla VK, et al. Laser-deposited CoCrmo alloy: microstructure, wear, and electrochemical properties. J Mater Res. 14 September 2014;29(17) Focus Issue: The Materials Science of Additive Manufacturing:2021–2027. DOI:10.1557/jmr.2014.163
- ImDae Ha Kim H-T, Do Kim Y, Fadonougbo JO, et al. Effect of phase transformation on the mechanical properties of the Co-Cr-Mo alloy fabricated by selective laser melting. Mater Charact 2022;186: 111767
- Amanov A. Effect of post-additive manufacturing surface modification temperature on the tribological and tribocorrosion properties of Co-Cr-Mo alloy for biomedical applications. Surf Coat Technol. 15 September 2021;421:127378. DOI:10.1016/j.surfcoat.2021.127378.
- Pratapa Reddy Y, Lakshmi Narayana K, Kedar Mallik M Prediction of influence of Co-Cr-Mo alloy coating on the wear rate of aluminium with HCl solution. Mater Today Proc. 2021 42(2):1287–1296.
- Mohammad Javad Razavi S, Avanzini Giovanna A, Luca Giorleo C, et al. Effect of heat treatment on fatigue behavior of as-built notched Co-Cr-Mo parts produced by selective laser melting. Int J Fatigue. 2021;142:105926.
- Mandal V, Hussain M, Kumar V, et al. Development of reinforced TiN-SS316 metal matrix composite (MMC) using directmetal laser sintering (DMLS) and its characterization. Mater Today Proc. 2017 4(9):9982–9986.
- Mandal V, Tripathi P, Kumar A, et al. A study on selective laser melting (SLM) of TiC and B4C reinforced IN718 metal matrix composites (MMCs). J Alloys Compd. 25 April 2022;901:163527. DOI:10.1016/j.jallcom.2021.163527.
- Tanprayoon D, Srisawadi S, Sato Y, et al. Microstructure and hardness response of novel 316L stainless steel composite with TiN addition fabricated by SLM. Opt Laser Technol. 2020 September;129:106238.
- Özsoy K. Examining mechanical properties of profiles manufactured aluminium extrusion dies using powder bed fusion. Measurement. 2021 June;177:109266.