References
- Mengdi G, Kang H, Lei , L, et al. A review on energy consumption, energy efficiency and energy saving of metal forming processes from different hierarchies. Mdpi:Processes. 2019;7(6):357.
- Davoudi M, Kim C. Evaluation of the axial crashworthiness of thin-walled structures with various and combined cross sections. J Mech Sci Technol. 2018;32:4271–4281.
- Ancellotti S, Fontanari V, Slaghenaufi S, et al. Forming rectangular tubes into complicated 3D shapes by combining three-roll push bending, twisting and rotary draw bending: the role of the fabrication loading history on the mechanical response. Int J Mater Form. 2019;12:907–926.
- Giuseppe I, Giuseppina A, Francesco, G, et al. A sustainability point of view on sheet metal forming operations: material wasting and energy consumption in incremental forming and stamping processes. J Clean Prod. 2017;29-30:255–268.
- Randy C, Nicholas W, et, Matt S et al, Applying ultrasonic vibration during single-point and two-point incremental sheet forming. Procedia Manuf. 2019;34:186–192. DOI:10.1016/j.promfg.2019.06.137
- Rith L, Christopher GA, Gabriel A, et al. Experimentally valided approach for the simulation of the forging process using mechanical vibration. Int J Mater Form. 2009;2:133.
- Blaha F, Langenecker B. Tensile deformation of zinc crystal under ultrasonic vibration. Naturwissenschaften. 1955;42: 556. DOI:10.1021/bi00694a023.
- Siegert K, Mock A. Wire drawing with ultrasonically oscillating dies. J Mater Process Technol. 1996;60:657–660.
- Siegert K, Ulmer J. Superimposing ultrasonic waves on the dies in tube and wiredrawing. J Eng Mater Technol Tech. 2001;123:517–523.
- Buckley JJ, Freeman MK. Ultrasonic tube drawing. Ultrasonics. 1970;8:152–158.
- Murakawa M, Jin M. The utility of radially and ultrasonically vibrated dies in the wire drawing process. J Mater Process Technol. 2001;11:381–386.
- Langenecker B. Work-Softening of metal crystals by alternating the rate of glide strain. Acta Metall. 1961;9:937–940.
- Graff KF. Ultrasonic metal forming processing: power ultrasonic, applications of high-intensity ultrasound. Columbus, OH, USA: Woodhead Publishing,; 2014.
- Li L, Lang X. Wire drawing with ultrasonic vibration. Jr Wire Ind. 1994;61:721.
- Hung JC, Tsai YC, Hung C. Frictional effect of ultrasonic-vibration on upsetting. Ultrasonics. 2007;46:277–284.
- Bunget C, Ngaile G. Influence of ultrasonic vibration on micro-extrusion. Ultrasonics. 2011;51:606–616.
- Inoue M. Studies on ultrasonic metal tube drawing. Vol. 19. Japan: Memoira of Sagami Institute of Technology; 1984. pp. 1–7.
- Petruzelka J, Sarmanova J, Sarman A. The effect of ultrasound on tube drawing. J Mater Process Technol. 1996;60:661–668.
- Susan M, Bujoreanu LG, et al. On the drawing in ultrasonic field of metallic wires with high mechanical resistance. J Optoelectron Adv Mater. 2005;7:637–645.
- Ashida Y, Aoyama H. Press forming using ultrasonic vibration. J Mater Process Technol. 2007;187–188:118–122.
- Shen L, Xiao S, Kai G, et al. Experimental study on titanium wire drawing with ultrasonic vibration. Ultrasonics. 2018;83:60–67.
- Jimma T, Kasuga Y, Iwaki N, et al. An application of ultrasonic vibration to the deep drawing process. J Mater Process Technol. 1998;80–81:406–412.
- Liu S, Shan X, Guo K, et al. Experimental study on titanium wire drawing with ultrasonic vibration. Ultrasonics. 2018;83:60–67.
- Ruirun C, Deshuang Z, Tengfei M. Effects of ultrasonic vibration on the microstructure and mechanical properties of high alloying TiAl. Sci Rep. 2017;7:41463.
- Petrov DR, Petrov RH, Delhez R, et al. The effect of tensile deformation by in situ ultrasonic treatment on the microstructure of low-carbon steel. Acta Materialia. 2013;61:1592–1602.
- Zhuang XC, Wang JP, Zheng H, et al. Forming mechanism of ultrasonic vibration assisted compression. Trans Nonferrous Met Soc China. 2015;25:2352–2360.
- Bai Y, Yang M. The influence of superimposed ultrasonic vibration on surface asperities deformation. J Mater Process Technol. 2016;229:367–374.
- Yanle L, Chen X, Jie, S, et al. Effects of ultrasonic vibration on deformation mechanism of incremental point-forming process. Procedia Eng. 2017;207:777–782.
- Zhou H, Cui H, Qin QH. Influence of ultrasonic vibration on the plasticity of metals during compression process. J Mater Process Technol. 2018;251:146–159.
- Djavanroodi F, Ahmdian H, Koohkan K, et al. Ultrasonic assisted-ECAP. Ultrasonics. 2013;53:1089–1096.
- Zhang J, Wang D. Investigations of tangential ultrasonic vibration turning of Ti6Al4V using finite element method. Int J Mater Form. 2019;12:257–267.
- Amini S, Bagheri A, Teimouri R. Ultrasonic-Assisted ball burnishing of aluminum 6061 and AISI 1045 steel. Mater Manuf Processes. 2018;33:1250–1259.
- Daud Y, Lucas M, Huang Z. Modelling the effects of superimposed ultrasonic vibrations on tension and compression tests of aluminium. Journal of Mate Proce Tech. 2007;186:179–190.
- Lucas M, Daud Y, A finite element model of ultrasonic extrusion. 7th International Conference on Modern Practice in Stress and Vibration Analysis. 2009; 181: 012–027. doi:10.1088/1742-6596/181/1/012027
- Susan M, Bujoreanu L, Găluşcă D, et al. Influence of the relative deformation rate on tube processing by ultrasonic vibration drawing. Rev Met. 2004;40:109–117.
- Shan X, Qi H, Wang L, et al. A new model of the antifriction effect on wiredrawing with ultrasound. Int J Adv Manuf Technol. 2012;63:1047–1056.
- Shen L, Xiaobiao S, Hengqiang C, et al. Finite element analysis on ultrasonic drawing process of fine titanium wire. Metals. 2020;10:575.
- Malekipour E, Sharifi E, Majd NS, et al. Observation on the behavior of ultrasonic micro-hammer and its effects on the deep drawing process: numerical simulation and experimental study. Ultrasonics. 2022;119:106566.
- Malekipour E, Heidary H, Majd NS, et al. Effect of resonant frequency variation on the ultrasonically assisted deep drawing process: numerical and experimental study. Int J Adv Manuf Technol. 2020;106:2243–2264.
- Liu S, Xie T, Han J, et al. Stress superposition effect in ultrasonic drawing of titanium wires: an experimental study. Ultrasonics. 2022;125:106775.
- Zhai J, Guan Y, Li Y, et al. The surface effect of ultrasonic vibration in double cup extrusion test. J Mater Process Technol. 2022;299:117344.
- ASTM E8/E8M-13 standard test methods for tension testing of metallic materials 2013.