https://orcid.org/0000-0001-7786-5692
References
- Devis B, Dabrow D, Ju L, et al. Study of chip morphology and chip formation mechanism during machining of magnesium-based metal matrix composites. J Manuf Sci Eng. 2017;139:191008 –1–10.
- Radhika N, Subramanian R, Sajith A. Analysis of chip formation in machining aluminium hybrid composites. E3 J Sci Res. 2014;2(1):009–015.
- Anti A, Petrovi PB, Zeljkovi M, et al. The influence of tool wear on the chip forming mechanism and tool vibrations. Mater Technol. 2012;46:279–285.
- Basavarajappaa S, Davim JP. Influence of graphite particles on surface roughness and chip formation studies in turning metal matrix composites. Mater Res. 2013;16(5):990–996.
- Dabade UA, Joshi SS. Analysis of chip formation mechanism in machining of Al/SiCp metal matrix composites. J Mater Process Technol. 2009;209(10):4704–4710.
- Marigoudar RN, Shashidhar PS, Kanakuppi S, et al. Study of tool wear progression and optimization while machining mono and hybrid zinc – aluminium based MMCs. Int J Mach Mach Mater. 2021;23(3):241–257.
- Du J, Zhou L, Li J, et al. Analysis of chip formation mechanism in mill-grinding of SiCp/al composites. Mater Manuf Processes. 2014;29:1353–1360.
- Xianqing X, Di Z, Jinshui L, et al. Friction and wear behaviour of TiC particle reinforced ZA43 matrix composites. Trans Nonferr Metal Soc China. 2001;11:249–253.
- Marigoudar RN, Sadashivappa K. Investigation of tool wear and surface roughness during machining of ZA43–SiCp composite using full factorial approach. J Eng Manuf (IMechE). 2013;227(6):821–831.
- Marigoudar RN, Sadashivappa K. Effect of reinforcement percentage on wear behaviour of SiCp reinforced ZA43 alloy metal matrix composites. Sci Eng Compos Mater. 2013;20(4):311–317.
- Xavior MA, Kumar JPA. Machinability of hybrid metal matrix composite - a review. Procedia Eng. 2017;174:1110–1118.
- Pul M. Investigation of the tool wear, surface roughness, and chip formation in the machining of ZrO2 reinforced aluminium composites. J Braz Soc Mech Sci Eng. 2020;42(11):565 (1–14). DOI:10.1007/s40430-020-02647-1.
- Sahoo AK, Pradhan S, Rout AK. Development and machinability assessment in turning Al/SiCp-metal matrix composite with multilayer coated carbide insert using Taguchi and statistical techniques. Arch Civil Mech Eng. 2013;13:27–35.
- Wu Q, Xu W, Zhang L. Machining of particulate-reinforced metal matrix composites: an investigation into the chip formation and subsurface damage. J Mater Process Technol. 2019;274:116315.
- Sun W, Duan C-Z, Yin W-D. Chip formation mechanism in machining of Al/SiCp composites based on analysis of particle damage. J Manuf Processes. 2021;64:861–877.