A hybrid algorithm for multi-objective optimisation of parameters nanofluid in MQL-turning of Inconel X-750

References

• Pereira WH, Delijaicov S. Surface integrity of INCONEL 718 turned under cryogenic conditions at high cutting speeds. Int J Adv Manuf Technol. 2019 104(5):2163–2177.
   Web of Science ®Google Scholar
• Hegab H, Kishawy HA, Gadallah MH, et al. On machining of Ti-6al-4V using multi-walled carbon nanotubes-based nano-fluid under minimum quantity lubrication. Int J Adv Manuf Technol. 2018 97(5):1593–1603.
   Web of Science ®Google Scholar
• Şirin Ş, Kıvak T. Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy. Tribol Int. 2019;137:180–192.
   Web of Science ®Google Scholar
• Amrita M, Rukmini Srikant R, Venkataramana VSN. Optimisation of cutting parameters for cutting temperature and tool wear in turning AISI4140 under different cooling conditions. Adv Mater Process Technol. 2020.
   Google Scholar
• Venkatesan K, Manivannan K, Devendiran S, et al. Study of forces, surface finish and chip morphology on machining of Inconel 825. Procedia Manuf. 2019;30:611–618.
   Google Scholar
• Sharma VS, Dogra M, Suri NM. Cooling techniques for improved productivity in turning. Int J Mach Tools Manuf. 2009 49(6):435–453.
   Web of Science ®Google Scholar
• Şirin Ş, Sarıkaya M, Vakkas Yıldırım Ç, et al. Machinability performance of nickel alloy X-750 with SiAlon ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL. Tribol Int. 2021;153:106673.
   Web of Science ®Google Scholar
• Ali MAM, Azmi AI, Murad MN, et al. Roles of new bio-based nanolubricants towards eco-friendly and improved machinability of Inconel 718 alloys. Tribol Int. 2020;144:106106. DOI:10.1016/j.triboint.2019.106106
   Web of Science ®Google Scholar
• Zaman PB, Imran Hasan Tusar M, Ranjan Dhar N. Selection of appropriate process inputs for turning Ti-6al-4V alloy under hybrid Al2O3-MWCNT nano-fluid based MQL. Adv Mater Process Technol. 2020;1–21.
   Google Scholar
• Darshan C, Jain S, Dogra M, et al. Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with a textured tool. Int J Adv Manuf Technol. 2019 105(5):1835–1849.
   Web of Science ®Google Scholar
• Venkatesan K, Devendiran S, Sachin D, et al. Investigation of machinability characteristics and comparative analysis under different machining conditions for sustainable manufacturing. Measurement. 2020;154:107425.
   Web of Science ®Google Scholar
• Sharma VS, Singh G, Sørby K. A review on minimum quantity lubrication for machining processes. Mater Manuf Processes. 2015 30(8):935–953.
   Web of Science ®Google Scholar
• Yıldırım ÇV, Sarıkaya M, Kıvak T, et al. The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625. Tribol Int. 2019;134:443–456.
   Web of Science ®Google Scholar
• Sundararajan D, Kannan V, Kumar P, et al. Investigation of machinability characteristics and chip morphology on Inconel 718: dry and MQL. No. 2019-28-0066. SAE Technical Paper, 2019.
   Google Scholar
• Makhesana MA, Patel KM. Performance assessment of vegetable oil-based nanofluid in minimum quantity lubrication (MQL) during machining of Inconel 718. Adv Mater Process Technol. 2021;1–17.
   Google Scholar
• Khan MS, Singh Sisodia M, Shubham Gupta MF, et al. Measurement of tribological properties of Cu and Ag blended coconut oil nanofluids for metal cutting. Eng Sci Technol Int J. 2019 22(6):1187–1192.
   Google Scholar
• Paturi UMR, Naveen Kumar G, Vamshi VS. Silver nanoparticle-based Tween 80 green cutting fluid (AgNP-GCF) assisted MQL machining-An attempt towards eco-friendly machining. Cleaner Eng Technol. 2020;1:100025.
   Google Scholar
• Hegab H, Umer U, Soliman M, et al. Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 718. Int J Adv Manuf Technol. 2018;96(9–12):3449–3458.
   Web of Science ®Google Scholar
• Gong L, Bertolini R, Ghiotti A, et al. Sustainable turning of Inconel 718 nickel alloy using MQL strategy based on graphene nanofluids. Int J Adv Manuf Technol. 2020 108(9):3159–3174.
   Web of Science ®Google Scholar
• Gupta MK, Song Q, Liu Z, et al. Environment and economic burden of sustainable cooling/lubrication methods in the machining of Inconel-800. J Clean Prod. 2021;287:125074.
   Web of Science ®Google Scholar
• Teo JJ, Olugu EU, Yeap SP, et al. “Turning of Inconel 718 using Nano-Particle based vegetable oils.” Materials Today: Proceedings (2021).
   Google Scholar
• Gupta MK, Iulian Pruncu C, Mia M, et al. Machinability investigations of Inconel-800 super alloy under sustainable cooling conditions. Materials. 2018 11(11):2088.
   PubMed Web of Science ®Google Scholar
• Tamang SK, Chandrasekaran M, Sahoo AK. Sustainable machining: an experimental investigation and optimization of machining Inconel 825 with dry and MQL approach. J Braz Soc Mech Sci Eng. 2018 40(8):1–18.
   Web of Science ®Google Scholar
• Hsiao T-C, Ngoc-Chien V, Tsai M-C, et al. Modeling and optimization of machining parameters in milling of INCONEL-800 super alloy considering energy, productivity, and quality using nanoparticle suspended lubrication. Meas Control. 2021 54(5–6):880–894.
   Web of Science ®Google Scholar
• Gupta MK, Sood PK. Machining comparison of aerospace materials considering minimum quantity cutting fluid: a clean and green approach. Proc Inst Mech Eng Part C J Mech Eng Sci. 2017 231(8):1445–1464.
   Web of Science ®Google Scholar
• Babu MN, Anandan V, Dinesh Babu M. Performance of ionic liquid as a lubricant in turning Inconel 825 via minimum quantity lubrication method. J Manuf Processes. 2021;64:793–804.
   Web of Science ®Google Scholar
• Ramanan KV, Ramesh Babu S, Jebaraj M, et al. Face turning of Incoloy 800 under MQL and nano-MQL environments. Mater Manuf Processes. 2021 36(15):1769–1780.
   Web of Science ®Google Scholar
• Robinson Gnanadurai R, Mesfin S. Investigations on the effect of silver nanoparticles on the performance of coconut oil based cutting fluid in a minimal fluid application. Adv Mech Eng. 2022 14(1):16878140211070445.
   Web of Science ®Google Scholar
• Yan L, Yuan S, Liu Q. Influence of minimum quantity lubrication parameters on tool wear and surface roughness in milling of forged steel. Chin J Mech Eng. 2012 25(3):419–429.
   Web of Science ®Google Scholar
• Huang S, Lv T, Wang M, et al. Effects of machining and oil mist parameters on electrostatic minimum quantity lubrication–emql turning process. Int J Precis Eng Manuf Green Technol. 2018 5(2):317–326.
   Web of Science ®Google Scholar
• Liu ZQ, Cai XJ, Chen M, et al. Investigation of cutting force and temperature of end-milling Ti–6Al–4V with different minimum quantity lubrication (MQL) parameters. Proc Inst Mech Eng Part B. 2011 225(8):1273–1279.
   Google Scholar
• Damir A, Sadek A, Attia H, et al. Characterization and optimization of machinability and environmental impact of machining of Ti-6al-4V with minimum quantity lubrication. Int J Robot Mechatron. 2017 4(1):1–7.
   Google Scholar
• Zaman PB, Dhar NR. Multi-Objective optimization of double-jet MQL system parameters meant for enhancing the turning performance of Ti–6Al–4V alloy. Arab J Sci Eng. 2020 45(11):9505–9526.
   Web of Science ®Google Scholar
• Korkmaz ME, Kumar Gupta M, Boy M, et al. Influence of duplex jets MQL and nano-MQL cooling system on machining performance of Nimonic 80A. J Manuf Processes. 2021;69:112–124.
   Web of Science ®Google Scholar
• Younas M, Husain Imran Jaffery S, Khan M, et al. Multi-Objective optimization for sustainable turning Ti6Al4V alloy using grey relational analysis (GRA) based on analytic hierarchy process (AHP). Int J Adv Manuf Technol. 2019 105(1):1175–1188.
   Web of Science ®Google Scholar
• Suresh R, Ajith GJ, Manjaiah M. Experimental Investigation on tool wear in AISI H13 die steel turning using RSM and ANN methods. Arab J Sci Eng. 2021 46(3):2311–2325.
   Web of Science ®Google Scholar
• Han F, Li L, Cai W, et al. Parameters optimization considering the trade-off between cutting power and MRR based on linear decreasing particle swarm algorithm in milling. J Clean Prod. 2020;262:121388.
   Web of Science ®Google Scholar
• Hegab H, Salem A, Rahnamayan S, et al. Analysis, modeling, and multi-objective optimization of machining Inconel 718 with nano-additives based minimum quantity coolant. Appl Soft Comput. 2021;108:107416.
   Web of Science ®Google Scholar
• Kumar R, Singh Bilga P, Singh S. Multi-Objective optimization using different methods of assigning weights to energy consumption responses, surface roughness and material removal rate during rough turning operation. J Clean Prod. 2017;164:45–57.
   Web of Science ®Google Scholar
• Viswanathan R, Ramesh S, Maniraj S, et al. Measurement and multi-response optimization of turning parameters for magnesium alloy using a hybrid combination of Taguchi-GRA-PCA technique. Measurement. 2020;159:107800.
   Web of Science ®Google Scholar
• Vavrek R. Evaluation of the impact of selected weighting methods on the results of the TOPSIS technique. Int J Inf Technol Decis Mak. 2019 18(06):1821–1843.
   Google Scholar
• Wood DA. Assessing the sustainability of potential gas hydrate exploitation projects by integrating commercial, environmental, social and technical considerations. Sustainable Geoscience for Natural Gas Subsurface Systems. Gulf Professional Publishing; 2022. p. 301–343.
   Google Scholar
• Balasubramaniyan S, Selvaraj T. Application of integrated Taguchi and TOPSIS method for optimization of process parameters for dimensional accuracy in turning of EN25 steel. J Chin Inst Eng. 2017 40(4):267–274.
   Web of Science ®Google Scholar
• Mohammadi-Balani A, Dehghan Nayeri M, Azar A, et al. Golden eagle optimizer: a nature-inspired metaheuristic algorithm. Comput Ind Eng. 2021;152:107050.
   Web of Science ®Google Scholar
• Kumar S, Singh D, Kalsi NS. Investigating the effect of approach angle and nose radius on the surface quality of Inconel 718. J Inst Eng India. 2019 100(1):121–128.
   Google Scholar
• Movahedi B, Mokhtari Homami R, Akhavan S. A new approach of wear mechanism map in turning Inconel718 with PVD-coated inserts using advanced techniques. Iran J Sci Technol - Trans Mech Eng. 2020 44(4):1091–1102.
   Web of Science ®Google Scholar