Wear behaviour of AlCN/AlC and FeCrN coatings developed on alloy steel

References

• Korsunsky AM, Torosyan AR, Kim K. Development and characterization of low friction coatings for protection against fretting wear in aerospace components. Thin Solid Films. 2008;516(16):5690–5699.
   Web of Science ®Google Scholar
• Miyoshi K, Lerch BA, Draper SL. Fretting wear of Ti-48Al-2Cr-2Nb. Tribol Int. 2003;36(2):145–153.
   Web of Science ®Google Scholar
• Kreines L, Halperin G, Etsion I, et al. Fretting wear of thin diamond films deposited on steel substrates. Diam Relat Mater. 2004;13(9):1731–1739.
   Web of Science ®Google Scholar
• Li Q, F-q J, Y-x L, et al. Microstructure and tribological properties of Ti (Cr) SiCN coating deposited by plasma enhanced magnetron sputtering. Vacuum. 2013;89:168–173.
   Web of Science ®Google Scholar
• Cheng Y, Zheng Y. Characterization of TiN, TiC and TiCN coatings on Ti–50.6 at.% Ni alloy deposited by PIII and deposition technique. Surf Coat Technol. 2007;201(9–11):4909–4912.
   Web of Science ®Google Scholar
• Badiger PV, Desai V, Ramesh M. Development and characterization of Ti/TiC/TiN coatings by cathodic arc evaporation technique. Trans Indian Inst Met. 2017;70(9):2459–2464.
   Web of Science ®Google Scholar
• Badiger PV. Investigations on characteristics and performance of hard thin films developed by cathodic arc. Evaporation: National Institute of Technology Karnataka, Surathkal; 2019.
   Google Scholar
• Badiger PV, Desai V, Ramesh M, editors. Performance of Ti-multilayer coated tool during machining of MDN431 alloyed steel. International Conference on Design, Materials & Manufacture, NITK Surathkal, January 2018. AIP conference proceedings, vol. 1943, no. 1, p. 020064; 2018: AIP Publishing LLC.
   Google Scholar
• Badiger PV, Desai V, Ramesh M, et al., editors. Influence of Ti coated tools on process parameters in turning process of MDN431. 2nd International Conference on Emerging Research in Civil, Aeronautical and Mechanical Engineering, NMIT Bangalore July 2019; 2020: AIP Publishing LLC.
   Google Scholar
• Badiger PV, Desai V, Ramesh M, et al. Cutting forces, surface roughness and tool wear quality assessment using ANN and PSO approach during machining of MDN431 with TiN/AlN-coated cutting tool. Arab J Sci Eng. 2019;44(9):7465–7477.
   Web of Science ®Google Scholar
• Badiger PV, Desai V, Ramesh M, et al. Tribological behaviour of monolayer and multilayer Ti-based thin solid films deposited on alloy steel. Mater Res Express. 2018;6(2):026419.
   Web of Science ®Google Scholar
• Badiger PV, Desai V, Ramesh M, et al. Effect of cutting parameters on tool wear, cutting force and surface roughness in machining of MDN431 alloy using Al and Fe coated tools. Mater Res Express. 2018;6(1):016401.
   Web of Science ®Google Scholar
• Efeoglu I, Bulbul F. Effect of crystallographic orientation on the friction and wear properties of MoxSy–Ti coatings by pulsed-dc in nitrogen and humid air. Wear. 2005;258(5–6):852–860.
   Web of Science ®Google Scholar
• Jellal I, Nouneh K, Hatel R, et al. Enhanced visible-light photocatalytic activity of rGO-ZnO composite thin films prepared by SILAR method. Adv Mater Process Technol 2022 1–16 10.1080/2374068X.2022.2108641
   Google Scholar
• Rajguru RR, Vasudevan H. A study of micro hardness in the machining of Inconel 625 using TiAlSiN coated tools under dry cutting conditions. Adv Mater Process Technol. 2022;1–11. 10.1080/2374068X.2022.2100035
   Google Scholar
• Downs RT, Hall-Wallace M. The American mineralogist crystal structure database. Am Mineral. 2003;88(1):247–250.
   Web of Science ®Google Scholar
• Chauhan S, Pabla B, Singh RP, et al. Study on surface integrity in turning of titanium using cryogenically treated CBN inserts. Adv Mater Process Technol 2022 1–23 10.1080/2374068X.2022.2106665
   Google Scholar
• Abusuilik SB. Pre-, intermediate, and post-treatment of hard coatings to improve their performance for forming and cutting tools. Surf Coat Technol. 2015;284:384–395.
   Web of Science ®Google Scholar
• Zhang X, Vitchev R, Lauwerens W, et al. Effect of crystallographic orientation on fretting wear behaviour of MoSx coatings in dry and humid air. Thin Solid Films. 2001;396(1–2):69–77.
   Web of Science ®Google Scholar
• Tkadletz M, Schalk N, Daniel R, et al. Advanced characterization methods for wear resistant hard coatings: a review on recent progress. Surf Coat Technol. 2016;285:31–46.
   Web of Science ®Google Scholar
• Ibrahim R, Rahmat M, Oskouei RH, et al. Monolayer TiAlN and multilayer TiAlN/CrN PVD coatings as surface modifiers to mitigate fretting fatigue of AISI P20 steel. Eng Fract Mech. 2015;137:64–78.
   Web of Science ®Google Scholar
• Benea L, Başa S-B, Dănăilă E, et al. Fretting and wear behaviors of Ni/nano-WC composite coatings in dry and wet conditions. Mater Des. 2015;65:550–558.
   Web of Science ®Google Scholar
• Pech D, Schupp N, Steyer P, et al. Duplex SiCN/DLC coating as a solution to improve fretting—Corrosion resistance of steel. Wear. 2009;266(7–8):832–838.
   Web of Science ®Google Scholar
• Hashemi R, Hussain G. Wear performance of Al/TiN dispersion strengthened surface composite produced through friction stir process: a comparison of tool geometries and number of passes. Wear. 2015;324:45–54.
   Web of Science ®Google Scholar
• Ivosevic M, Knight R, Kalidindi S, et al. Solid particle erosion resistance of thermally sprayed functionally graded coatings for polymer matrix composites. Surf Coat Technol. 2006;200(16–17):5145–5151.
   Web of Science ®Google Scholar
• Saha G, Khan T, Zhang G. Erosion–corrosion resistance of microcrystalline and near-nanocrystalline WC–17Co high velocity oxy-fuel thermal spray coatings. Corros Sci. 2011;53(6):2106–2114.
   Web of Science ®Google Scholar
• Nguyen Q, Nguyen V, Lim C, et al. Effect of impact angle and testing time on erosion of stainless steel at higher velocities. Wear. 2014;321:87–93.
   Web of Science ®Google Scholar
• Tlili B, Mustapha N, Nouveau C, et al. Correlation between thermal properties and aluminum fractions in CrAlN layers deposited by PVD technique. Vacuum. 2010;84(9):1067–1074.
   Web of Science ®Google Scholar
• Tlili B, Nouveau C, Guillemot G, et al. Investigation of the effect of residual stress gradient on the wear behavior of PVD thin films. J Mater Eng Perform. 2018;27(2):457–470.
   Web of Science ®Google Scholar
• Nouveau C, Tlili B, Aknouche H, et al. Comparison of CrAlN layers obtained with one (CrAl) or two targets (Cr and Al) by magnetron sputtering. Thin Solid Films. 2012;520(7):2932–2937.
   Web of Science ®Google Scholar
• Sanchette F, Loi TH, Billard A, et al. Structure—properties relationship of metastable Al-Cr and Al-Ti alloys deposited by rf magnetron sputtering: role of nitrogen. Surf Coat Technol. 1995;74:903–909.
   Web of Science ®Google Scholar
• Creus J, Billard A, Sanchette F. Corrosion behaviour of amorphous Al–Cr and Al–Cr–(N) coatings deposited by dc magnetron sputtering on mild steel substrate. Thin Solid Films. 2004;466(1–2):1–9.
   Web of Science ®Google Scholar
• Kale A, Brusa R, Miotello A. Structural and electrical properties of AlN films deposited using reactive RF magnetron sputtering for solar concentrator application. Appl Surf Sci. 2012;258(8):3450–3454.
   Web of Science ®Google Scholar
• Park M-H, Kim S-H. Thermal conductivity of AlN thin films deposited by RF magnetron sputtering. Mater Sci Semicond Process. 2012;15(1):6–10.
   Web of Science ®Google Scholar
• Cai F, Huang X, Yang Q, et al. Microstructure and tribological properties of CrN and CrSiCN coatings. Surf Coat Technol. 2010;205(1):182–188.
   Web of Science ®Google Scholar
• Nohava J, Dessarzin P, Karvankova P, et al. Characterization of tribological behavior and wear mechanisms of novel oxynitride PVD coatings designed for applications at high temperatures. Tribol Int. 2015;81:231–239.
   Web of Science ®Google Scholar
• Holmberg K, Mathews A. Coatings tribology: a concept, critical aspects and future directions. Thin Solid Films. 1994;253(1–2):173–178.
   Web of Science ®Google Scholar
• Budinski KG. Guide to friction, wear and erosion testing. ASTM international West. Conshohocken; 2007.
   Google Scholar
• Kennedy D, Hashmi M. Methods of wear testing for advanced surface coatings and bulk materials. J Mater Process Technol. 1998;77(1–3):246–253.
   Web of Science ®Google Scholar
• Ţălu Ş, Patra N, Salerno M. Micromorphological characterization of polymer-oxide nanocomposite thin films by atomic force microscopy and fractal geometry analysis. Prog Org Coat. 2015;89:50–56.
   Web of Science ®Google Scholar
• Annersten H, Olesch M. Distribution of ferrous and ferric iron in clintonite and the Mössbauer characteristics of ferric iron in tetrahedral coordination. Can Mineral. 1978;16(2):199–203.
   Google Scholar
• Petruk W. Relationship between the specific magnetic susceptibility and the iron plus manganese content of chlorite. Can Mineral. 1965;8(3):372–376.
   Google Scholar
• Anthony J, Bideaux RA, Bladh K, et al. Arsenates, Phosphates, Vanadates. In: John W. Anthony, editors. Handbook of Mineralogy. ChantillyVA: Mineralogical Society of America; 2000.Vol. 4:680.
   Google Scholar
• Gražulis S, Chateigner D, Downs RT, et al. Crystallography Open Database–an open-access collection of crystal structures. J Appl Crystallogr. 2009;42(4):726–729.
   PubMed Web of Science ®Google Scholar
• Hellenbrandt M. The inorganic crystal structure database (ICSD)—present and future. Crystallography Rev. 2004;10(1):17–22
   Google Scholar
• Liang Q, Stanishevsky A, Vohra YK. Tribological properties of undoped and boron-doped nanocrystalline diamond films. Thin Solid Films. 2008;517(2):800–804.
   Web of Science ®Google Scholar
• Wang Q, Ishikawa H, Nakano S, et al. Curvature-based residual stress measurement for ion-implanted stainless-steel sheet. Vacuum. 2004;75(3):225–229.
   Web of Science ®Google Scholar
• Carvalho N, Zoestbergen E, Kooi B, et al. Stress analysis and microstructure of PVD monolayer TiN and multilayer TiN/(Ti, Al) N coatings. Thin Solid Films. 2003;429(1–2):179–189.
   Web of Science ®Google Scholar
• Antartis D. Residual stresses and mechanical properties of thin film photovoltaic materials. 2012.
   Google Scholar
• Guo C, Pei Z, Fan D, et al. Predicting multilayer film’s residual stress from its monolayers. Mater Des. 2016;110:858–864.
   Web of Science ®Google Scholar
• Koskinen J Cathodic-arc and thermal-evaporation deposition. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd; 2014. p. 3–55.
   Google Scholar
• Ramamoorthy B, Yeldose BC. An investigation into the adhesion strength of diamond like carbon multilayer coating (DLC/TiN/Ti/Cu/Ni). Int Info Man. 2009;1(3):179
   Google Scholar
• Su Y, Kao W. Optimum multilayer TiN–TiCN coatings for wear resistance and actual application. Wear. 1998;223(1–2):119–130.
   Web of Science ®Google Scholar
• Su Y, Kao W. Tribological behavior and wear mechanisms of TiN/TiCN/TiN multilayer coatings. J Mater Eng Perform. 1998;7(5):601–612.
   Web of Science ®Google Scholar
• Zhu S, Peng L, Zhou Q, et al. Creep behaviour of aluminium strengthened by fine aluminium carbide particles and reinforced by silicon carbide particulates—DS Al–SiC/Al4C3 composites. Mater Sci Eng A. 2000;282(1–2):273–284.
   Web of Science ®Google Scholar
• Seibert F, Döbeli M, Fopp-Spori DM, et al. Comparison of arc evaporated Mo-based coatings versus Cr1N1 and ta–C coatings by reciprocating wear test. Wear. 2013;298:14–22.
   Web of Science ®Google Scholar
• Wilson S, Alpas A. TiN coating wear mechanisms in dry sliding contact against high speed steel. Surf Coat Technol. 1998;108:369–376.
   Web of Science ®Google Scholar
• Ma G, Wang L, Gao H, et al. The friction coefficient evolution of a TiN coated contact during sliding wear. Appl Surf Sci. 2015;345:109–115.
   Web of Science ®Google Scholar
• Shen X, Cao L, Li R, editors. Numerical simulation of sliding wear based on archard model. 2010 International Conference on Mechanic Automation and Control Engineering; 2010: Wuhan, China: IEEE.
   Google Scholar
• Podgornik B, Vižintin J, Ronkainen H et al, Tribological Characteristics of Duplex Treated AISI 4140 Steel In: Dowson D, Priest M, Taylor CM et al, Tribology Series. Vol. 38. Elsevier; 2000. pp. 525–532.
   Google Scholar
• Miyoshi K. Friction and wear properties of as-deposited and carbon ion-implanted diamond films. Mater Sci Eng A. 1996;209(1–2):38–53.
   Web of Science ®Google Scholar