Investigation of microstructural and wear properties of stir cast and friction stir processed AA 2014-based metal matrix composites

References

• Tokaji K. Effect of stress ratio on fatigue behaviour in SiC particulate reinforced aluminium alloy composites. Fatigue Fract Eng Mater Struct. 2005;28(6):539–545.
   Web of Science ®Google Scholar
• Parikh VK, Badgujar AD, Ghetiya ND. Joining of metal matrix composites using friction stir welding: a review. Mater Manuf Processes. 2019;34(2):123–146.
   Web of Science ®Google Scholar
• Khan KB, Kutty TRG, Surappa MK. Hot hardness and indentation creep study on Al – 5% Mg alloy matrix – B4C particles reinforced composites. Mater Sci Eng A. 2006;427(1–2):76–82.
   Web of Science ®Google Scholar
• Toptan F, Kilicarslan A, Karaaslan A, et al. Processing and microstructural characterisation of AA 1070 and AA 6063 matrix B4Cp reinforced composites. Mater Design. 2010;31(1):S87–91.
   Google Scholar
• Adamiak M. Selected parameters aluminium alloy base composites reinforced with intermetallic particles. J Achiev Mater Manuf Eng. 2005;14(1–2):43-47.
   Google Scholar
• Pandiyarajan R, Maran P, Marimuthu S, et al. Investigation on mechanical properties of ZrO2, C and AA6061 metal matrix composites. Adv Mater Process Technol. 2020;1–9. DOI:10.1080/2374068X.2020.1810946
   Google Scholar
• Nagesh D, Raghavendra S, Sivaram NM, et al. Tribological characteristics of Al6061, boron and graphite hybrid metal matrix composites. Adv Mater Process Technol. 2020. DOI:10.1080/2374068X.2021.1946323
   Google Scholar
• Muralidharan N, Chockalingam K, Kalaiselvan K, et al. Investigation of ZrO2 reinforced aluminium metal matrix composites by liquid metallurgy route. Adv Mater Process Technol. 2022;1–15. DOI:10.1080/2374068X.2022.2095132
   Google Scholar
• Singh G, Singh A. Fabrication and testing of aluminium A365 alloy base composites blend with Al2O3 particles. Int J Sci Res. 2016;5(12):96–99.
   Google Scholar
• Sankhla A, Patel KM. Metal matrix composites fabricated by stir casting process – a review. Adv Mater Process Technol. 2021;1–22. DOI:10.1080/2374068X.2020.1855404
   Google Scholar
• Jamaati R, Toroghinejad MR, Szpunar JA, et al. Tribocorrosion behaviour of Al/Al2O3 MMC produced by ARB process. Tribol - Mater Surf. 2011;5(1):10–15.
   Google Scholar
• Pul M. The effect of MgO ratio on surface roughness in Al-MgO composites. Mater Manuf Processes. 2013;28(9):963–968.
   Web of Science ®Google Scholar
• Alagarsamy SV, Ravichandran M, Meignanamoorthy M. Multi-objective optimization of dry sliding wear control parameters for stir casted AA 7075 – TiO2 composites using Taguchi-Grey relational approach. Aust J Mech Eng. 2020. DOI:10.1080/14484846.2020.1815997
   Web of Science ®Google Scholar
• Singh R, Singh G. Investigations of Al-SiC AMC prepared by vacuum moulding assisted stir casting. J Manuf Processes. 2015;19:142–147.
   Web of Science ®Google Scholar
• Moses JJ, Dinaharan I, Sekhar SJ. Prediction of influence of process parameters on tensile strength of AA 6061/TiC aluminium matrix composites produced using stir casting. Trans Nonferrous Met Soc China. 2016;26(6):1498–1511.
   Web of Science ®Google Scholar
• Aherwar A, Patnaik A, Pruncu CI. Effect of B4C and waste porcelain ceramic particulate reinforcements on mechanical and tribological characteristics of high strength AA7075 based hybrid composite. J Mater Res Technol. 2020;9(5):9882–9894.
   Google Scholar
• Poria S, Sutradhar G, Sahoo P. Abrasive wear behaviour of Al-TiB2 and Al-TiB2-nano-graphite metal matrix composites. Proc Inst Mech Eng L. 2021;235(5):1146–1159.
   PubMedGoogle Scholar
• Kumar BA, Murugan N. Metallurgical and mechanical characterization of stir cast AA 6061 – T6 – AlNp composites. Mater Design. 2012;40:52–58.
   Web of Science ®Google Scholar
• Xiu ZY, Chen GQ, Wu GH, et al. Effect of volume fraction on microstructure and mechanical properties of Si3N4/Al composites. Trans Nonferrous Met Soc China. 2011;21(2):285–289.
   Web of Science ®Google Scholar
• Sathish T, Saravanan T, Vijayan V. Effect of reinforced aluminium alloy LM30 with pure ceramic particles to evaluate hardness and wear properties. Mater Res Innovation. 2020;24(3):129–132.
   Google Scholar
• Gopalakrishnan S, Murugan N. Production and wear characteristic of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method. Composites. 2012;43(2):302–308.
   Google Scholar
• Baradeswaran A, Elayaperumal A, Issaca RF. A statistical analysis of optimization of wear behaviour of Al – Al2O3 composites using Taguchi technique. Procedia Eng. 2013;64:973–982.
   Google Scholar
• Bharti S, Ghetiya ND, Patel K. Fabrication of AA6061/Al 2 O 3 surface composite by double pass friction stir processing and investigation on mechanical and wear properties. Adv Mater Processv Technol. 2021;1–15. DOI:10.1080/2374068X.2021.1953923
   Google Scholar
• Mathur V, Prabhu SR, Patel M, et al. Reinforcement of titanium dioxide nanoparticles in aluminium alloy AA 5052 through friction stir processing. Adv Mater Process Technol. 2019;5(2):329–337.
   Google Scholar
• Murugarajan A, Srimath N. Effect of titanium carbide reinforcement on micro structure and wear properties of annealed AA6082 by friction stir processing. Adv Mater Process Technol. 2020. DOI:10.1080/2374068X.2020.1865126
   Google Scholar
• Parikh VK, Badheka VJ, Badgujar AD, et al. Fabrication and processing of aluminium alloy metal matrix composites. Mater Manuf Processes. 2021;36(14):1604–1617.
   Web of Science ®Google Scholar
• Rao RN, Das S. Effect of sliding distance on the wear and friction behavior of as cast and heat-treated Al–SiCp composites. Mater Des. 2011;32(5):3051–3058.
   Web of Science ®Google Scholar
• How HC, Baker TN. Dry sliding wear behaviour of Saffil-reinforced AA6061 composites. Wear. 1997;210(1–2):263–272.
   Web of Science ®Google Scholar
• Shaik D, Sudhakar I, Bharat GCSG, et al. Tribological behavior of friction stir processed AA6061 aluminium alloy. Mater Today Proc. 2020;44(1):860–864.
   Google Scholar
• Barati M, Abbasi M, Abedini M. The effects of friction stir processing and friction stir vibration processing on mechanical, wear and corrosion characteristics of Al6061/SiO2 surface composite. J Manuf Processes. 2019;45:491–497.
   Web of Science ®Google Scholar
• Wang A, Rack HJ. Transition wear behavior of SiC-particulate-and SiC-whisker-reinforced 7091 Al metal matrix composites. Mater Sci Eng A. 1991;147(2):211–224.
   Web of Science ®Google Scholar
• Archard JF. Contact and rubbing of flat surfaces. J Appl Phys. 1953;24(8):981–988.
   Web of Science ®Google Scholar
• Archard J, Hirst W. The wear of metals under unlubricated conditions. Proc R Soc Lond A Math Phys Sci. 1956;236:397–410.
   Web of Science ®Google Scholar
• Dinaharan I, Saravanakumar S, Kalaiselvan K, et al. Microstructure and sliding wear characterization of Cu/TiB2 copper matrix composites fabricated via friction stir processing. J Asian Ceram Soc. 2017;5(3):295–303.
   Web of Science ®Google Scholar
• Kim HS. On the rule of mixtures for the hardness of particle reinforced composites. Mater Sci Eng A. 2000;289(1–2):30–33.
   Web of Science ®Google Scholar
• Xue P, Xie GM, Xiao BL, et al. Effect of heat input conditions on microstructure and mechanical properties of friction-stir-welded pure copper. Metall Mater Trans A. 2010;41(8):2010–2021.
   Google Scholar
• Zhiqiang S, Di Z, Guobin L. Evaluation of dry sliding wear behavior of silicon particles reinforced aluminum matrix composites. Mater Des. 2005;26(5):454–458.
   Web of Science ®Google Scholar
• Dwivedi DK. Sliding temperature and wear behaviour of cast Al-Si-Mg alloys. Mater Sci Technol. 2003;19(8):1091–1096.
   Web of Science ®Google Scholar
• Reddy AS, Bai BNP, Murthy KSS, et al. Wear and seizure of binary Al/Si alloys. Wear. 1994;171(1–2):115–127.
   Web of Science ®Google Scholar
• Baradeswaran A, Elayaperumal A, Issac FR. A statistical analysis of optimization of wear behaviour of Al-Al2O3 composites using Taguchi technique. Procedia Eng. 2013;64:973–982.
   Google Scholar
• Bowden FP, Tabor D. The friction and lubrication of solids. New York: Oxford University Press; 1951.
   Google Scholar
• Rosenberger MR, Schvezov CE, Forlerer E. Wear of different aluminum matrix composites under conditions. Wear. 2005;259(1–6):590–601.
   Web of Science ®Google Scholar
• Savaskan T, Bican O. Dry sliding friction and wear properties of Al–25Zn–3Cu–(0–5)Si alloys in the as-cast and heat-treated conditions. Tribology Lett. 2010;40(3):327–336.
   Web of Science ®Google Scholar
• Bharti S, Ghetiya ND, Patel KM. Micro-hardness and wear behavior of AA2014/Al2O3 surface composite produced by friction stir processing. SN Appl Sci. 2020;2(11):1760.
   Web of Science ®Google Scholar