Direct monitoring of porosity evolution by dynamic modulus measurements: Three case studies

References

• Alberici, S., Montanari, R., & Tata, M. E. (2000). H induced C-Cr associate redistribution in MANET steel. Journal of Alloys and Compounds, 310(1–2), 209–213. https://doi.org/10.1016/S0925-8388(00)01027-6
   Google Scholar
• Amadori, S., Bonetti, E., Deodati, P., Donnini, R., Montanari, R., Pasquini, L., & Testani, C. (2009). Low temperature damping behaviour of Ti6Al4V + SiCf composite. Materials Science and Engineering: A, 521–522, 340–342. https://doi.org/10.1016/j.msea.2008.09.156
   Web of Science ®Google Scholar
• Amadori, S., Campari, E. G., Fiorini, A. L., Montanari, R., Pasquini, L., Savini, L., & Bonetti, E. (2006). Automated resonant vibrating reed analyzer apparatus for a non destructive characterization of materials for industrial applications. Materials Science and Engineering: A, 442(1–2), 543–546. https://doi.org/10.1016/j.msea.2006.02.210
   Web of Science ®Google Scholar
• Banhart, J. (2001). Manufacture, characterisation and application of cellular metals and metal foams. Progress in Materials Science, 46(6), 559–632. https://doi.org/10.1016/S0079-6425(00)00002-5
   Web of Science ®Google Scholar
• Bennett, T. D., Coudert, F. X., James, S. L., & Cooper, A. I. (2021). The changing state of porous materials. Nature Materials, 20(9), 1179–1187. https://doi.org/10.1038/s41563-021-00957-w
   PubMed Web of Science ®Google Scholar
• Blanter, M. S., Golovin, I. S., Neuhäuser, H., & Sinning, H.-R. (2007). Internal friction in metallic materials. Springer Series in Materials Science. Berlin Heidelberg: Springer Verlag ISBN 10: 3642088252 ISBN 13: 9783642088254
   Google Scholar
• Boccaccini, A. R., Ondracek, G., Mazilu, P., & Windelberg, D. (1993). On the effective Young’s modulus of elasticity for porous materials: Microstructure modelling and comparison between calculated and experimental values. Journal of the Mechanical Behavior of Materials, 4(2), 119–128. https://doi.org/10.1515/JMBM.1993.4.2.119
   Google Scholar
• Bocchini, G. F., Montanari, R., & Varone, A. (2013). Influence of probe test orientation, sintering degree and morphological anisotropy of porosity on the Young’s modulus of homogeneous sintered steel. In Proceedings of the EPMA, Gothenburg, Sweden.
   Google Scholar
• Bolli, E., Fava, A., Ferro, P., Kaciulis, S., Mezzi, A., Montanari, R., & Varone, A. (2020). Cr segregation and impact fracture in a martensitic stainless steel. Coatings, 10(9), 843. https://doi.org/10.3390/coatings10090843
   Web of Science ®Google Scholar
• Bonetti, E., Cabibbo, M., Campari, E. G., & Montanari, R. (2021). Correlation between anelastic response and microstructure of 5N-Al thin foils. Journal of Alloys and Compounds, 872, 159693. https://doi.org/10.1016/j.jallcom.2021.159693
   Web of Science ®Google Scholar
• Bonetti, E., Montanari, R., Testani, C., & Valdré, G. (2000). Irreversible transformation in as-cast FeAl B2-ordered alloy obtained by melt spinning. Journal of Materials Research, 15(3), 659–664. https://doi.org/10.1557/JMR.2000.0098
   Web of Science ®Google Scholar
• Cabibbo, M., Montanari, R., Pola, A., Tocci, M., & Varone, A. (2022). Mechanical spectroscopy study of as-cast and additive manufactured AlSi10Mg. Journal of Alloys and Compounds, 914, 165361. https://doi.org/10.1016/j.jallcom.2022.165361
   Web of Science ®Google Scholar
• Campari, E. G., Amadori, S., Bonetti, E., Berti, R., & Montanari, R. (2019). Anelastic behaviour of small dimensioned aluminum. Metals, 9(5), 549. https://doi.org/10.3390/met9050549
   Web of Science ®Google Scholar
• Chen, Z., Wang, X., Giuliani, F., & Atkinson, A. (2015). Microstructural characteristics and elastic modulus of porous solids. Acta Materialia, 89, 268–277. https://doi.org/10.1016/j.actamat.2015.02.014
   Web of Science ®Google Scholar
• Deodati, P., Donnini, R., Montanari, R., & Testani, C. (2009). High temperature damping behaviour of Ti6Al4V + SiCf composite. Materials Science and Engineering: A, 521–522, 318–321. https://doi.org/10.1016/j.msea.2008.09.109
   Web of Science ®Google Scholar
• Deodati, P., Donnini, R., Montanari, R., & Ucciardello, N. (2012). Microstructural investigation on tungsten for applications in future nuclear fusion reactors. Materials Science Forum, 706–709, 835–840. https://doi.org/10.4028/www.scientific.net/MSF.706-709.835
   Google Scholar
• Deodati, P., Montanari, R., Tassa, O., & Ucciardello, N. (2009). Single crystal PWA 1483 superalloy: Dislocation rearrangement and damping phenomena. Materials Science and Engineering: A, 521–522, 102–105. https://doi.org/10.1016/j.msea.2008.09.107
   Web of Science ®Google Scholar
• Dukhan, N., Chen-Wiegart, Y. K., Paz y Puente, A., Erdeniz, D., & Dunand, D. C. (2020). Porous metals: From nano to macro. Journal of Materials Research, 35(19), 2529–2534. https://doi.org/10.1557/jmr.2020.282
   Web of Science ®Google Scholar
• Eudier, M. (1962). The mechanical properties of sintered low-alloy steels. Powder Metallurgy, 5(9), 278–290. https://doi.org/10.1179/pom.1962.5.9.005
   Google Scholar
• Fava, A., Montanari, R., Richetta, M., Testani, C., & Varone, A. (2018). Analysis of strengthening mechanisms in nano-ODS steel depending on preparation route. Journal of Material Sciences & Engineering, 7(4), 1000474. doi:10.4172/2169-0022.1000474
   Google Scholar
• Gibson, L. J., & Ashby, M. F. (1989). Cellular solids. In Structure and properties (2nd ed.). Cambridge, UK: Cambridge University Press. https://doi.org/10.1017/CBO9781139878326
   Google Scholar
• Giovagnoli, M., Tocci, M., Fortini, A., Merlin, M., Ferroni, M., Migliori, A., & Pola, A. (2021). Effect of different heat-treatment routes on the impact properties of an additively manufactured AlSi10Mg alloy. Materials Science and Engineering: A, 802, 140671. https://doi.org/10.1016/j.msea.2020.140671
   Web of Science ®Google Scholar
• Gondi, P., & Montanari, R. (1992). On the Cr distribution in MANET steel. Physica Status Solidi (a), 131(2), 465–480. https://doi.org/10.1002/pssa.2211310221
   Google Scholar
• Gondi, P., & Montanari, R. (1994). Q−1 spectra connected with C under solute atom interaction. Journal of Alloys and Compounds, 211–212, 33–36. https://doi.org/10.1016/0925-8388(94)90441-3
   Web of Science ®Google Scholar
• Gupta, R., Gondi, P., Montanari, R., Principi, G., & Tata, M. E. (1997). Internal friction and Mössbauer study of C-Cr associates in MANET steel. Journal of Materials Research, 12(2), 296–299. https://doi.org/10.1557/JMR.1997.0038
   Web of Science ®Google Scholar
• Hooper, P. A. (2018). Melt pool temperature and cooling rates in laser powder bed fusion. Additive Manufacturing, 22, 548–559. doi:10.1016/j.addma.2018.05.032
   Web of Science ®Google Scholar
• Jafari, D., van Alphen, K. J. H., Geurts, B. J., Wits, W. W., Cordova Gonzalez, L., Vaneker, T. H. J., … Gibson, I. (2020). Porous materials additively manufactured at low energy: Single-layer manufacturing and characterization. Materials & Design, 191, 108654. https://doi.org/10.1016/j.matdes.2020.108654
   Web of Science ®Google Scholar
• Kovačik, J. (1999). Correlation between Young’s modulus and porosity in porous materials. Journal of Materials Science Letters, 18(13), 1007–1010. https://doi.org/10.1023/A:1006669914946
   Google Scholar
• Manoylov, A. V., Borodich, F. M., Evans, H. P. (2013). Modelling of elastic properties of sintered porous materials. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 469, 20120689. https://doi.org/10.1098/rspa.2012.0689
   Web of Science ®Google Scholar
• Michailidis, N., Stergioudi, F., Omar, H., Papadopoulos, D. P., & Tsipas, D. N. (2011). Experimental and FEM analysis of the material response of porous metals imposed to mechanical loading. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 382(1–3), 124–131. https://doi.org/10.1016/j.colsurfa.2010.12.017
   Web of Science ®Google Scholar
• Michailidis, N., Tsouknidas, A., Lefebvre, L.-P., Hipke, T., & Kanetake, N. (2014). Production, characterization, and applications of porous materials. Advances in Materials Science and Engineering, 2014, 1–2. https://doi.org/10.1155/2014/263129
   Web of Science ®Google Scholar
• Mitchell, M. R., Link, R. E., Iacovone, B., Libardi, S., Molinari, A., Zadra, M., … Plini, P. (2008). FIMEC tests on SPS sintered FeMo nanostructured alloys. Journal of Testing and Evaluation, 36(5), 101365. https://doi.org/10.1520/JTE101365
   Web of Science ®Google Scholar
• Montanari, R., & Varone, A. (2012). Mechanical spectroscopy investigation of liquid Pb-Bi alloys. Solid State Phenomena, 184, 434–439. https://doi.org/10.4028/www.scientific.net/SSP.184.434
   Google Scholar
• Montanari, R., & Varone, A. (2015). Synergic Role of Self-interstitials and Vacancies in Indium Melting. Metals, 5(2), 1061–1072. https://doi.org/10.3390/met5021061
   Web of Science ®Google Scholar
• Nakajima, H. (2007). Fabrication, properties and application of porous metals with directional pores. Progress in Materials Science, 52 (7), 1091–1173. https://doi.org/10.1016/j.pmatsci.2006.09.001
   Web of Science ®Google Scholar
• Nowick, A. S., & Berry, B. S. (1972). Anelastic relaxation in crystalline solids. New York, NY; London, UK: Academic Press. https://doi.org/10.1016/B978-0-12-522650-9.X5001-0
   Google Scholar
• Pabst, W., & Gregorová, E. (2014). Young’s modulus of isotropic porous materials with spheroidal pores. Journal of the European Ceramic Society, 34(13), 3195–3207. https://doi.org/10.1016/j.jeurceramsoc.2014.04.009
   Web of Science ®Google Scholar
• Richetta, M., & Varone, A. (2020). A focus on dynamic modulus: Effects of external and internal morphological features. Metals, 11(1), 40. https://doi.org/10.3390/met11010040
   Web of Science ®Google Scholar
• Sousa, L., Pereira, L., Montes-González, D., Ramos, D., Amado-Mendes, P., Barrigón-Morillas, J. M., & Godinho, L. (2023). Experimental analysis and simulation of a porous absorbing layer for noise barriers. Applied Sciences, 13(4), 2638. https://doi.org/10.3390/app13042638
   Google Scholar
• Suzuki, A., Kosugi, N., Takata, N., & Kobashi, M. (2020). Microstructure and compressive properties of porous hybrid materials consisting of ductile Al/Ti and brittle Al3Ti phases fabricated by reaction sintering with space holder. Materials Science and Engineering: A, 776, 139000. https://doi.org/10.1016/j.msea.2020.139000
   Web of Science ®Google Scholar
• Torquato, S. (2002). Random heterogeneous materials – Microstructure and macroscopic properties (pp. 437–563). New York: Springer. doi:10.1115/1.1483342
   Google Scholar
• Vijayan, S., Anna Dilfi, K. F., & Venkatachalapathy, S. (2022). Porous metals. In A. Uthaman, S. Thomas, T. Li, & H. Maria (Eds.), Advanced functional porous materials. engineering materials. Switzerland: Springer Nature. https://doi.org/10.1007/978-3-030-85397-6_15
   Google Scholar
• Yang, X. Y., Chen, L. H., Li, Y., Rooke, J. C., Sanchez, C., & Su, B. L. (2017). Hierarchically porous materials: Synthesis strategies and structure design. Chemical Society Reviews, 46(2), 481–558. https://doi.org/10.1039/C6CS00829A
   PubMed Web of Science ®Google Scholar