31
Views
7
CrossRef citations to date
0
Altmetric
Articles

Time and temperature dependence of surface segregation in commercial steel, studied by Auger electron spectroscopy

Pages 521-526 | Published online: 18 Jul 2013

  • D. L. NEWHOUSE: SIP 499, 'Temper embrittlement of alloy steels'; 1972, Philadelphia, Pa, American Society for Testing and Materials.
  • w. C. JOHNSON and J. M. BLAICELY: 'Interfacial segregation'; 1979, Metals Park, Ohio, American Society for Metals.
  • E. D. HONDROS and M. P. SEAH: Int. Met. Rev., 1977, 22, 262.
  • C. LEA and E. D. HONDROS: Proc. R. Soc., 1982, A377, 477.
  • N. BANDYOPADHYAY and C. L. BRIANT: Metall. Trans., 1983, 14A, 2005.
  • P. SEAH: Philos. Trans. R. Soc., 1980, A295, 265.
  • w. D. NIX, K. S. YU, and J. S. WANG: Metall. Trans., 1983, 14A, 563.
  • S. H. CHEN, T. TAKASUGI, and D. P. POPE: Metall. Trans., 1983, 14A, 571.
  • K. S. YU, A. JOSHI, and W. D. NIX: Metall. Trans., 1983, 14A, 2447.
  • C. LEA and M. P. SEAH: in Proc. Int. Conf. on 'The effects of residual, impurity, and microalloying elements on weldability and weld properties', P37; 1983, Cambridge, The Welding Institute.
  • C. LEA and M. P. SEAH: Scr. Metall., 1975, 9, 583.
  • J. BERNARDINI, P. GAS, E. D. HONDROS, and M. P. SEAH: Proc. R. Soc., 1982, A379, 159.
  • G. MATHIEU, P. GAS, A. COMBE-BRUN, and J. BERNARDINI: Acta Metall., 1983, 31, 1661.
  • M. P. SEAH: Acta Metall., 1980, 28, 955.
  • E. D. HONDROS and P. J. HENDERSON: Metall. Trans., 1983, 14A, 521.
  • M. P. SEAH: Acta Metall., 1977, 25, 345.
  • W. R. TYSON: Acta Metall., 1978, 26, 1471.
  • C. LEA and M. P. SEAH: Philos. Mag., 1977, 35, 213.
  • M. GurrmANN and D. McLEAN: in 'Interfacial segregation', ( ed. W. C. Johnson and J. M. Blakely), 261; 1979, Metals Park, Ohio, American Society for Metals.
  • M. GUTMANN, Ph. DUMOULIN, and M. WAYMAN: Metall. Trans., 1982, 13A, 1693.
  • C. LEA and M. P. SEAH: Surf. Sci., 1975, 53, 272.
  • M. T. THOMAS, D. R. BAER, R. H. JONES, and S. M. BRUEMMER: J. Vac. Sci. Technol., 1980, 17, 25.
  • E. D. HONDROS, M. P. SEAH, and C. LEA: Met. Mater., January 1976, 26.
  • D. McLEAN: 'Grain boundaries in metals'; 1957, Oxford, Oxford University Press.
  • S. DUSHMAN: 'Scientific foundations of vacuum technique', 2nd edn; 1962, New York, John Wiley.
  • R. E. HONIG and D. A. KRAMER: RCA Rev., 1969, 30, 285.
  • R. HULTGREN, P. A. DEAN, D. T. HAWKINS, M. GLEISER, K. K. KELLY, and D. D. WAYMAN: 'Selected values of the thermodynamic properties of elements'; 1973, Metals Park, Ohio, American Society for Metals.
  • M. P. SEAH and C. LEA: Philos. Meg., 1975, 31, 627.
  • C. LEA and C. MOLINARI: J. Mater. Sci., 1984, 19, 2336.
  • M. P. SEAH: Surf. Sci., 1973, 40, 595.
  • M. P. SEAH and E. D. HONDROS: Proc. R. Soc., 1973, A335, 191.
  • H. ERHART and H. J. GRABICE: Met. Sci., 1981, 15, 401.
  • D. TREHEUX, D. MARCHIVE, J. DELAGRANGE, and P. GUIRALDENQ: CR Acad. Sci. Ser. C, 1972, 274, 1260.
  • P. L. GRUZIN and V. V. MURAL: Fiz. Met. Metalloved., 1964, 17, (3), 62.
  • O. KUBASCHEWSKI and C. B. ALCOCK: 'Metallurgical thermo-chemistry', 5th edn; 1979, Oxford, Pergamon.
  • H. GLEITER and B. CHALMERS: Prog. Mater. Sci., 1972, 16, 77.
  • A. C. YEN, W. R. GRAHAM, and G. R. BELTON: Metall. Trans., 1978, 9A, 31.
  • G. T. BURSTEIN and Q. CLARRON: Scr. Metall., 1979, 13, 1099.
  • J. WOODWARD and G.T. BURS-FEIN: Met. Sci., 1980, 14, 529.
  • D. McLEAN: Met. Forum, 1981, 4, 45.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.