Effect of light curing protocol on degree of conversion of composites

References

• Chen L, Yu Q, Wang Y, Li H. BisGMA/TEGDMA dental composite containing high aspect-ratio hydroxyapatite nanofibers. Dent Mater 2011;27:1187–95.
   PubMed Web of Science ®Google Scholar
• Schmidt C, Ilie N. The effect of aging on the mechanical properties of nanohybrid composites based on new monomer formulations. Clin Oral Investig 2013;17:251–7.
   PubMedGoogle Scholar
• Polydorou O, Huberty C, Wolkewitz M, Bolek R, Hellwing E, Kummerer K. The effect of storage médium on the elution of monomers from composite materials. J Biomed Mater Res B Appl Biomater 2012;100:68–74.
   PubMedGoogle Scholar
• Mitra SB, Wu D, Holmes BN. An application of nanotechnology in advanced dental materials. J Am Dent Assoc 2003;134:1382–90.
   PubMed Web of Science ®Google Scholar
• Beun S, Glorieux T, Devaux J, Vreven J, Leloup G. Characterization of nanofilled compared to universal and microfilled composites. Dent Mater 2007;23:51–9.
   PubMed Web of Science ®Google Scholar
• Leprince JG, Leveque P, Nysten B, Gallez B, Devaux J, Leloup G. New insight into the “depth of cure” of dimethacrylate-based dental composites. Dent Mater 2012;28:512–20.
   PubMed Web of Science ®Google Scholar
• Cekic-Nagas I, Egilmes F, Ergun G. The effect of irradiatio distance on microhardness of resin composites cured with diferente light curing units. Eur J Dent 2010;4:440–6.
   PubMedGoogle Scholar
• Mundim FM, Garcia LFR, Cruvinel DR, Lima FA, Bachmann L, Pires-de-Souza FCP. Color stability, opacity and degree of conversion of pre-heated composites. J Dent 2011;39:e25–9.
   PubMedGoogle Scholar
• Tabatabaee MH, Mahdavi H, Zandi S, Kharrazi MJ. HPCL analysis of eluted monomers from two composites resins cured with LED and halogen curing lights. J Biomed Mater Res 2009;88:191–6.
   Google Scholar
• Aranha AM, Giro EM, Hebling J, Lessa FC, Costa CA. Effects of light-curing time on the citotoxicity of a retorative composite resino n odontoblast-like cells. J Appl Oral Sci 2010;18:461–6.
   PubMed Web of Science ®Google Scholar
• Faria-e-Silva AL, Lima AF, Moraes RR, Piva E, Martins LR. Degree of conversion of etch-and-rinse and self-etch adhesives light-cured using QTH or LED. Oper Dent 2010;35:649–54.
   PubMed Web of Science ®Google Scholar
• Asmussen E, Peutzfeldt A. Polymer structure of a light-cured resin composite in relation to distance from the surface. Eur J Oral Sci 2003;111:277–9.
   PubMedGoogle Scholar
• Stansbury JW. Dimethacrylate network formation and polymer property evolution as determined by the selection of monomers and curing conditions. Dent Mater 2012;28:13–22.
   PubMed Web of Science ®Google Scholar
• Fujita K, Ikemi T, Nishiyama N. Effects of particle size of sílica filler on polymerization conversion in a light-curing resin composite. Dent Mater 2011;27:1079–85.
   PubMed Web of Science ®Google Scholar
• Calheiros FC, Daronch M, Rueggeberg FA, Braga RR. Influence of irradiant energy on the degree of conversion, polymerization rate and shrinkage stress in an experimental resin composite system. Dent Mater 2008;24:1164–8.
   PubMed Web of Science ®Google Scholar
• Rueggeberg FA, Hashinger DT, Fairhust CW. Calibration of FTIR conversion analysis of contemporary dental resin composites. Dent Mater 1990;6:241–9.
   PubMed Web of Science ®Google Scholar
• Lopes LG, Jardim Filho Ada V, de Souza JB, Rabelo D, Franco EB, de Freitas GC. Influence of pulse-delay curing on sorption and solubility of a composite resin. J Appl Oral Sci 2009;17:27–31.
   PubMedGoogle Scholar
• Feng L, Nunez R, Carvalho R, Suh BI. Effects of restoration and substrate on polymerization contraction stress of dental composites. J Biomed Mater Res 2009;88:482–91.
   Google Scholar
• Catelan A, Santos MR, Menegazzo LM, Moraes JC, dos Santos PH. Effect of light curing modes on mechanical properties of direct and indirect composites. Acta Odontol Scand 2013;71:697–702.
   PubMed Web of Science ®Google Scholar
• Sigusch BW, Pflaum T, Volpel A, Gretsch K, Hoy S, Watts DC, et al. Resin-composite cytotoxicity varies with shade and irradiance. Dent Mater 2012;28:312–19.
   PubMed Web of Science ®Google Scholar
• Prati C, Chersoni S, Montebugnoli L, Montanari G. Effect of air, dentin and resin-based composite thickness on light intensity reduction. Am J Dent 1999;12:231–4.
   PubMed Web of Science ®Google Scholar
• Zhu S, Platt J. Curing efficiency of three different curing modes at different distances for four composites. Oper Dent 2011;36:362–71.
   PubMed Web of Science ®Google Scholar
• Flury S, Hayoz S, Peutzfeldt A, Husler J, Lussi A. Depth of cure of resin composites: is the ISO 4049 method suitable for bulk fill materials? Dent Mater 2012;28:521–8.
   PubMed Web of Science ®Google Scholar
• Gonçalves F, Kawano Y, Stansbury JW, Braga RR. Influence of BisGMA, TEGDMA, and BisEMA contentes on viscosity, conversion, and flexural strength of experimental resins and composites. Eur J Oral Sci 2009;117:442–6.
   PubMed Web of Science ®Google Scholar
• Cornelio RB, Wikant A, Mjøsund H, Kopperud HM, Haasum J, Gedde UW, et al. The influence of bis-EMA vs bis GMA on the degree of conversion and water susceptibility of experimental composite materials. Acta Odontol Scand 2013; In press.
   PubMedGoogle Scholar