References
- Sham AS, Chu FC, Chai J, Chow TW. Color stability of provisional prosthodontic materials. J Prosthet Dent 2004;91:447–52.
- Toh CG, Setcos JC, Weinstein AR. Indirect dental laminate veneers - an overview. J Dent 1987;15:117–24.
- Turkaslan S, Tezvergil-Mutluay A, Bagis B, Vallittu PK, Lassila LV. Effect of fiber-reinforced composites on the failure load and failure mode of composite veneers. Dent Mater J 2009;28:530–6.
- Bertassoni LE, Marshall GW, de Souza EM, Rached RN. Effect of pre- and post polymerization on flexural strength and elastic modulus of impregnated, fiber-reinforced denture base acrylic resins. J Prosthet Dent 2008;100:449–57.
- Jagger DC, Jagger RG, Allen SM, Harrison A. An investigation into the transverse and impact strength of “high strength” denture base acrylic resins. J Oral Rehabil 2002;29:263–7.
- Zortuk M, Kılıc K, Uzun G, Ozturk A, Kesima B. The effect of different fiber concentrations on the surface roughness of provisional crown and fixed partial denture resin. Eur J Dent 2008;2:185–90.
- Narva KK, Vallittu PK, Helenius H, Yli-Urpo A. Clinical survey of acrylic resin removable denture repairs with glass-fiber reinforcement. Int J Prosthodont 2001;14:219–24.
- Narva KK, Lassila LV, Vallittu PK. The static strength and modulus of fiber reinforced denture base polymer. Dent Mater 2005;21:421–8.
- van Heumen CC, Kreulen CM, Bronkhorst EM, Lesaffre E, Creugers NH. Fiber-reinforced dental composites in beam testing. Dent Mater 2008;24:1435–43.
- Aydin C, Yilmaz H, Caglar A. Effect of glass fiber reinforcement on the flexural strength of different denture base resins. Quintessence Int 2002;33:457–63.
- John J, Gangadhar SA, Shah I. Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers. J Prosthet Dent 2001;86:424–7.
- Kanie T, Fujii K, Arikawa H, Inoue K. Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. Dent Mater 2000;16:150–8.
- Lassila LVJ, Nohrström T, Vallittu PK. The influence of short-term water storage on the flexural properties of unidirectional glass fiber-reinforced composites. Biomaterials 2002;23:2221–9.
- Dyer SR, Lassila LV, Jokinen M, Vallittu PK. Effect of fiber position and orientation on fracture load of fiber-reinforced composite. Dent Mater 2004;20:947–55.
- Dyer SR, Lassila LV, Jokinen M, Vallittu P. Effect of cross-sectional design on the modulus of elasticity and toughness of fiber-reinforced composite materials. J Prosthet Dent 2005;94:219–26.
- Tezvergil A, Lassila LV, Vallittu PK. The effect of fiber orientation on the polymerization shrinkage strain of fiber-reinforced composites. Dent Mater 2006;22:610–16.
- Kanie T, Arikawa H, Fujii K, Bans S. Impact strength of acrylic denture base resin reinforced with woven glass fiber. Dent Mater J 2003;22:30–8.
- Meriç G, Dahl JE, Ruyter IE. Physicochemical evaluation of silica-glass fiber reinforced polymers for prosthodontic applications. Eur J Oral Sci 2005;113:258–64.
- Vallittu PK, Lassila VP, Lappalainen R. Transverse strength and fatigue of denture acrylic-glass fiber composite. Dent Mater 1994;10:116–21.
- Vallittu PK, Ruyter IE, Ekstrand K. Effect of water storage on the flexural properties of E-glass and silica fiber acrylic resin composite. Int J Prosthodont 1998;11:340–50.
- Vallittu PK. Ultra-high-modulus polyethylene ribbon as reinforcement for denture polymethyl methacrylate: a short communication. Dent Mater 1997;13:381–2.
- Uzun G, Keyf F. The effect of woven, chopped and longitudinal glass fibers reinforcement on the transverse strength of a repair resin. J Biomater Appl 2001;15:351–8.
- Cardelli PL, Vertucci V, Balestra F, Montani M, Arcuri C. Mechanical evaluation and FEM analysis of stress in fixed partial dentures zirconium-ceramic. Oral Implantol (Rome) 2013;6:55–62.
- Nejatidanesh F, Momeni G, Savabi O. Flexural strength of interim resin materials for fixed prosthodontics. J Prosthodont 2009;18:507–11.
- Anusavis KJ. Mechanical properties of dental materials. In Anusavice KJ, Shen C, Rawls HR, editors. Phillips’ science of dental materials. 12th ed. St. Louis: Elsevier Inc; 2013. p 48–68.
- Obukuro M, Takahashi Y, Shimizu H. Effect of diameter of glass fibers on flexural properties of fiber-reinforced composites. Dent Mater J 2008;27:541–8.
- Malquarti G, Berruet RG, Bois D. Prosthetic use of carbon fiber-reinforced epoxy resin for esthetic crowns and fixed partial dentures. J Prosthet Dent 1990;63:251–7.