Methacrylate-based polymeric dental materials: Conversion and related properties: Summary and Review

References

• Antonucci J. M, Toth E. E. Degree of polymerization of dental resins by differential scanning calorimetry. J. Dent. Res. Spec. 1981; 60(Issue A)369, Abstr. No. 234
   Google Scholar
• Asmussen E. NMR-analysis of monomers in restorative resins. Acta Odontol. Scand. 1975; 33: 129–134
   PubMed Web of Science ®Google Scholar
• Bates J. F., Stafford G. D., Huggett R., Handley R. W. Current status of pour type denture base resins. J. Dent. 1977; 5: 177–189
   PubMed Web of Science ®Google Scholar
• Bergman B. The effects of prosthodontic materials on oral issues. Oral Sci. Rev. 1977; 10: 75–93
   PubMedGoogle Scholar
• Billingham N. C., Jenkins A. D. Free-radical polymerization in heterogeneous systems. Comprehensive chemical kinetics. Vol. 14A Free-radical polymerisation, C. H. Bamford, C. F.H. Tipper. Elsevier Scientific Publishing Co., Amsterdam, Oxford. New York 1976; 475–479
   Google Scholar
• Bowen R. L. Dental filling material comprising vinyl silane treated fused silica and a binder consisting of the reaction product of bis phenol and glycidyl acrylate. U.S. Pat. Off. 1962; 3: 066–112
   Google Scholar
• Bowen R. L. Compatibility of various materials with oral tissues. I: The components in composite restorations. J. Dent. Res. 1979; 58: 1493–1503
   PubMed Web of Science ®Google Scholar
• Budtz-Jörgensen E. The significance of Candida albicans in denture stomatitis. Scand. J. Dent. Res. 1974; 82: 151–190
   PubMedGoogle Scholar
• Buonocore M. G. A simple method of increasing the adhesion of acryl filling materials to enamel surfaces. J. Dent Res. 1955; 34: 849–853
   PubMedGoogle Scholar
• Buonocore M. G., Davila J. Restoration of fractured anterior teeth with ultraviolet-light-polymerized bonding materials: a new technique. J. Am. Dent. Assoc. 1973; 86: 1349–1354
   PubMed Web of Science ®Google Scholar
• Chandler H. H., Bowen R. L., Paffenbarger G. C., Mullineaux A. L. Clinical evaluation of a radiopaque composite restorative material after three and a half years. J. Dent. Res. 1973; 52: 1128–1137
   PubMedGoogle Scholar
• Clemmensen O., Hjorth N. Perioral contact urticaria from sorbic acid and benzoic acid in a salad dressing. Contact Dermatitis 1982; 8: 1–6
   PubMedGoogle Scholar
• Clewell D. H. Scattering of light by pigment particles. J. Opt. Soc. Am. 1941; 31: 521–527
   Google Scholar
• Cowperthwaite G. F., Foy J. J., Malloy M. A. The nature of the crosslinking matrix found in dental composite filling materials and sealants. Polymer science and technology. Vol. 14. Biomedical and dental applications of polymers, C. G. Gebelein, F. F. Koblitz. Plenum Press, New York and London 1981; 379–385
   Google Scholar
• Crawford J. W.C. The properties of some higher polymethacrylic esters. J. Soc. Chem. Ind. 1949; 68: 201–208
   Google Scholar
• Czapp A. E., Schnebel E., Goelz A. Verfah-ren zur Schnellpolymerisation von Gemischen aus monomeren und polymeren Vinylverbin-dungen. Dtsch. Patentamt, Patentschr. 1941, No. 975 072
   Google Scholar
• Dickson G. Physical and chemical properties and wear. J. Dent. Res. 1979; 58: 1535–1543
   PubMed Web of Science ®Google Scholar
• Eames W. B., Strain J. D., Weitmann R. T., Williams A. K. Clinical comparison of composite, amalgam, and silicate restorations. J. Am. Dent. Assoc. 1974; 89: 1111–1117
   PubMed Web of Science ®Google Scholar
• Eames W. B., O'Neal S. J., Black J., Rogers L. B. The incisal edge repair bonanza. J.Am. Dent. Assoc. 1975; 90: 369–372
   PubMedGoogle Scholar
• Eames W. B., O'Neal S. J., Rogers L. B. Composite plain talk. J. Am. Dent. Assoc. 1976; 92: 550–554
   PubMedGoogle Scholar
• Ellis B., Faraj S. A.A. The structure and surface topography of acrylic denture base materials. J. Dent. 1980; 8: 102–108
   PubMedGoogle Scholar
• Eriksen H. M. A clinical evaluation of silicate and composite restorations after 3 years of use. J. Oral Rehabil. 1974; 1: 317–321
   PubMed Web of Science ®Google Scholar
• Eriksen H. M. Experimental studies on clinical aspects of composite resins. Thesis, Univ., Oslo 1977
   Google Scholar
• Fan P. L., Powers J. M., Craig R. G. in vitro wear of microfilled and visible light-cured composites. J. Dent. Res. 1979; 58: 2116–2119
   PubMed Web of Science ®Google Scholar
• Glantz P.-O., Bates J. F. Creep in some acrylic dental resins. Odontol. Revy 1973; 24: 283–292
   PubMedGoogle Scholar
• Glantz P.-O., Stafford G. D. Recovery of some acrylic dental resins after repeated loading. 1. Laboratory study. Swed. Dent. J. 1973; 66: 129–134
   Google Scholar
• Glantz P.-O., Stafford G. D. Recovery of some acrylic resins after repeated loading. 2. Clinical study. Swed. Dent. J. 1973; 66: 137–142
   Google Scholar
• Grassie N. Chemistry of high polymer degradation processes. Butterworth Scientific Publications., London 1956; 14: 160–226; 255–262
   Google Scholar
• Gross A. Kunststoffe in der Zahnmedizin. Chem. Unserer Zeit 1979; 13: 142–146
   Google Scholar
• Hagger O. Ausnützung der Quellungsenergie zur Beschleunigung der durch Sulfinsäure ange-regten Polymerisation von Methacrylester bei Raumtemperatur. Helv. Chim. Acta 1951; 34: 1872–1876
   Google Scholar
• Hammer B., Hotz P. Nachkontrolle von 1- bis 5jährigen Amalgam-, Komposit- und Goldguss-füllungen. Schweiz. Monatsschr. Zahnheilkd. 1979; 89: 301–314
   PubMedGoogle Scholar
• Joelson K., Herr P., Holz J., Baume L.-J. ContrÔles clinique, macrophotographique et mic-rophotographique de 4 composites résineux. Schweiz. Monatsschr. Zahnheilkd. 1981; 91: 877–897
   PubMedGoogle Scholar
• Johansen J., Widnes V. Ett tilfelle av allergisk reaksjon pa tannprotesematerialc. Nor. Tann-lâgeforen. Tid. 1972; 82: 21–22
   PubMedGoogle Scholar
• Jordan R. E., Suzuki M., Gwinnett A. J., Hunter J. K. Restoration of fractured and hypo-plastic incisors by the acid etch resin techique: a three-year report. J. Am. Dent. Assoc. 1977; 95: 795–803
   PubMedGoogle Scholar
• Kaaber S., Thulin H., Nielsen E. Skin sensitivity to denture base materials in the burning mouth syndrome. Contact Dermatitis 1979; 5: 90–96
   PubMed Web of Science ®Google Scholar
• Kallus T., Hensten-Pettersen A. Tissue response to denture base polymers in formaldehyde-sensitized guinea pigs. 1982, In preparation
   Google Scholar
• Kulzer & Co. GmbH. Verfahren zur Herstellung von Prothesen für zahnärztliche oder andere Zwecke aus polymerisierten organischen Verbin-dungen. Dtsch. Reichspatentamt, Patentschr. 1936, No. 737 058 racterization of cross-linked two-phase acrylic polymers. J. Dent. Res. 1976; 55: 452–459
   PubMed Web of Science ®Google Scholar
• Kusy R. P., Leinfelder K. F. Pattern of wear in posterior composite restorations. J. Dent. Res. 1977; 56: 544
   PubMed Web of Science ®Google Scholar
• Larato D. C. Influence of a composite resin restoration on the gingiva. J. Prosthet. Dent. 1972; 28: 402–404
   PubMed Web of Science ®Google Scholar
• Leinfelder K. F., Sluder T. B., Sockwell C. L., Strickland W. D., Wall J. T. Clinical evaluation of composite resins as anterior and posterior restorative materials. J. Prosthet. Dent. 1975; 33: 407–416
   PubMed Web of Science ®Google Scholar
• Liatukas E. L. A clinical investigation of composite resin restorations in anterior teeth. J. Prosthet. Dent. 1972; 27: 616–621
   PubMed Web of Science ®Google Scholar
• Lutz F., Leuthard P. Verschleissfeste MOD-Kompositfüllungen durch Einpolymerisation von zentrischen Stops aus Keramik - 4-Jahrcs-Resul-tate. Schweiz. Monatsschr. Zahnheilkd. 1978; 88: 740–752
   PubMedGoogle Scholar
• Magnusson B., Blohm S.-G., Fregert S., Hjorth N., Høvding G., Pirilä V., Skog E. Routine patch testing IV. Supplementary series of test substances for Scandinavian countries. Acta Derm. -Venereol. 1968; 48: 110–114
   PubMedGoogle Scholar
• Mayo F. R., Miller A. A. The oxidation of un-saturatcd compounds. VII. The oxidation of me-thacrylic esters. J. Am. Chem. Soc. 1958; 80: 2493–2496
   Web of Science ®Google Scholar
• McCabe J. F., Wilson H. J. The use of differential scanning calorimetry for the evaluation of dental materials. Part II. Denture base materials. J. Oral Rehabil. 1980; 7: 235–243
   PubMedGoogle Scholar
• Meier C., Lutz F. Vergleichende Verschleiss-festigkeitsmessungen in vivo zwischen Amalgam und Komposit. Dtsch. Zahnarztl. Z. 1980; 35: 489–492
   PubMedGoogle Scholar
• Mjör I. A. Orsaker til revision av fyllningar. Tandläkartiden. 1979; 71: 552–556
   Google Scholar
• Mjör I. A. Placement and replacement of restorations. Oper. Dent. 1981; 6: 49–54
   Web of Science ®Google Scholar
• Niemelä R., Vainio H. Formaldehyde exposure in work and the general environment. Occurrence and possibilities for prevention. Scand. J. Work. Environ. Health 1981; 7: 95–100
   PubMedGoogle Scholar
• Nyquist G. Sensitivity to methyl methacrylate. Trans. R. Sch. Dent. Stockholm Umeå 1958; 1: 36–51
   Google Scholar
• Olsen I. Denture stomatitis. Acta Odontol. Scand. 1975; 33: 41–46
   PubMed Web of Science ®Google Scholar
• Osborne J. W., Gale E. N., Ferguson G. W. One-year and two-year clinical evaluation of a composite resin vs. amalgam. J. Prosthet. Dent. 1973; 30: 795–800
   PubMed Web of Science ®Google Scholar
• Phillips R. W., Avery D. R., Mehra R., Swartz ML., McCune R. J. Observations on a composite resin for class II restorations: Three-year report. J. Prosthet. Dent. 1973; 30: 891–897
   PubMed Web of Science ®Google Scholar
• Phillips R. W. Should I be using amalgam or composite restorative materials?. Int. Dent. J. 1975; 25: 236–241
   PubMed Web of Science ®Google Scholar
• Powers J. M., Dennison J. B., Koran A. Color stability of restorative resins under accelerated aging. J. Dent. Res. 1978; 57: 964–970
   PubMed Web of Science ®Google Scholar
• Powers J. M., Fan P. L. Erosion of composite resins. J. Dent. Res. 1980; 59: 815–819
   PubMed Web of Science ®Google Scholar
• Powers J. M., Fan P. L., Marcotte M. in vitro accelerated aging of composites and a sealant. J. Dent. Res. 1981; 60: 1672–1677
   PubMed Web of Science ®Google Scholar
• Roberts M. W., Moffa J. P. Repair of fractured incisal angles with an ultraviolet-light-activated fissure sealant and a composite resin: two-year report of 60 cases. J. Am. Dent. Assoc. 1973; 87: 888–891
   PubMed Web of Science ®Google Scholar
• Rock W. P. The use of ultra-violet radiation in dentistry. Br. Dent. J. 1974; 136: 455–458
   PubMed Web of Science ®Google Scholar
• Roulet J. F., Mettler P., Friedrich U. Studie über die Abrasion von Komposits im Seitenzahn-bereich - Resultate nach 3 Jahren. Dtsch. Zahnärztl. Z. 1980; 35: 493–497
   PubMedGoogle Scholar
• Ruyter I. E., Györösi P.-P. An infrared spec-troscopic study of sealants. Scand. J. Dent. Res. 1976; 84: 396–400
   PubMedGoogle Scholar
• Ruyter I. E. Unpolymerized surface layers on sealants. Acta Odontol. Scand. 1981; 39: 27–32
   PubMed Web of Science ®Google Scholar
• Ruyter I. E., Rødsrud P. G. Cyclopolymeriza-tion of alkanediol dimethacrylates. 1982, In preparation.
   Google Scholar
• Ruyter I. E., Vingerling P. A. Shear band formation in denture base polymers. 1982, In preparation
   Google Scholar
• Scheuermann H. Zum Restmonomergehalt von Prothesenwerkstoffen. Dent. Labor 1981; 29: 1695–1696
   PubMedGoogle Scholar
• Schnebel E. Verfahren zur Herstellung von Zahn ersatzteihen, insbesondere Füllungen, aus Polymerisationskunstharzen. Dtsch. Reichspa-tentamt, Patentschr. 1940; 760: 351
   Google Scholar
• Schulz G. V., Henrici G. Reaktionskinetik der Polymerisationshemmung durch molekularen Sauerstoff. Versuche mit Methylmethacrylat. Makromol. Chem. 1956; 18/19: 437–454
   Google Scholar
• Skjørland K. K. Plaque accumulation on different dental filling materials. Scand. J. Dent. Res. 1973; 81: 538–542
   PubMedGoogle Scholar
• Soltész U., Klaiber B., Greiner B. Abrieb von Füllungsmaterialien durch Nahrung. Simulation im Modellversuch. Dtsch. Zahnärztl. Z. 1981; 36: 648–651
   PubMedGoogle Scholar
• Stafford G. D., Bates J. F., Huggett R., Glantz P.-O. Creep in denture base polymers. J. Dent. 1975; 3: 193–197
   PubMedGoogle Scholar
• Stafford G. D., Bates J. F., Huggett R., Handley R. W. A review of the properties of some denture base polymers. J. Dent. 1980; 8: 292–306
   PubMed Web of Science ®Google Scholar
• Stafford G. D., Lewis T. T. Fatique test machine for denture base polymers. Biomater. 1980; 1: 9–12
   PubMedGoogle Scholar
• Stanley H. R., Bowen R. L., Folio J. Compatibility of various materials with oral tissues. II: Pulp responses to composite ingredients. J. Dent. Res. 1979; 58: 1507–1517
   PubMed Web of Science ®Google Scholar
• Stupp S. I., Weertman J. Characterization of monomer to polymer conversions in dental composites. J. Dent. Res. Spec. 1979; 58(Issue A)329, Abstr. No. 949
   Google Scholar
• Thompson V. P., Williams E. F., Bailey W. J. Dental resins with reduced shrinkage during hardening. J. Dent. Res. 1979; 58: 1522–1532
   PubMed Web of Science ®Google Scholar
• Trommsdorff E. Herstellung von Formmassen. Kunstoff-Hand-buch. Vol. IX. Polymethacrylate. Herstellung Ei-genschaften, Verabeitung und Anwendung, R. Vieweg, F. Esser. Carl Hanser Verlag, Munchen 1975; 22–43
   Google Scholar
• Trudsø H., Budtz-jørgensen E., Bertram U. A four-year follow-up study on processed pour acrylic resins. J. Prosthet. Dent. 1980; 44: 495–496
   PubMed Web of Science ®Google Scholar
• Ulvestad H. A 5-year evaluation of semipermanent composite resin crowns. Scand. J. Dent. Res. 1978; 86: 163–168
   PubMedGoogle Scholar
• van Groeningen G., Arends J. In vivo-abra-sion of composites, a quantitative investigation. J. Dent. Res. 1982; 61: 571, Abstr. No. 60
   Web of Science ®Google Scholar
• Vincent P. I. Strength of plastics - 9. Methacrylate ester polymers. Plast. 1962; 27: 105–110
   Google Scholar
• Viohl J. Verfärbung von Kunststoffen durch un-terschiedliche Lichtquellen. Dtsch. Zahnärztl. Z. 1976; 31: 910–914
   PubMedGoogle Scholar
• Weitman R. T., Eames W. B. Plaque accumulation on composite surfaces after various finishing procedures. J. Am. Dent. Assoc. 1975; 91: 101–106
   PubMed Web of Science ®Google Scholar
• Wilder A. D., May K. N., Leinfelder K. F. Two-year clinical study of UV-polymerized composites in posterior teeth. J. Dent. Res. Spec. 1981; 60(Issue A)583, Abstr. No. 1096
   Google Scholar
• Wilson G. S., Davies E. H., von Fraunhofer J. A. Abrasive wear characteristics of anterior restorative materials. Br. Dent. J. 1981; 151: 335–338
   PubMedGoogle Scholar
• Zachrisson B. U., Heimgård E., Ruyter I. E., Mjor LA. Problems with sealants for bracket bonding. Am. J. Orthod. 1979; 75: 641–649
   PubMedGoogle Scholar