The effect of ethanol on the formation and physico-chemical properties of particles generated from budesonide solution-based pressurized metered-dose inhalers

References

• Terzano C. (2001). Pressurized metered dose inhalers and add-on devices. Pulm Pharmacol Ther, 14:351–366.
   PubMed Web of Science ®Google Scholar
• Evans M, Telfer A, Smith R, Smith B, Lang G, Chen J, et al. (1974). Stratospheric sink for chlorofluoromethanes: chlorine atomc-atalysed destruction of ozone. Nature, 249:811.
   Web of Science ®Google Scholar
• Cicerone RJ, Stolarski RS, Walters S. (1974). Stratospheric ozone destruction by man-made chlorofluoromethanes. Science, 185:1165–1167.
   PubMed Web of Science ®Google Scholar
• Wofsy SC, McElroyp MB, Sze ND. (1975). Freon consumption: implications for atmospheric ozone. Science, 187:535–536.
   PubMed Web of Science ®Google Scholar
• Whitham ME, Eagle A. (1994). Alternative propellants: proprietary rights, toxicological issues and projected licensing problems. RDD IV, 203–209.
   Google Scholar
• Gupta A, Stein SW, Myrdal PB. (2003). Balancing ethanol cosolvent concentration with product performance in 134a-based pressurized metered dose inhalers. J Aerosol Med, 16:167–174.
   PubMedGoogle Scholar
• Stein SW, Myrdal PB. (2004). A theoretical and experimental analysis of formulation and device parameters affecting solution MDI size distributions. J Pharm Sci, 93:2158–2175.
   PubMed Web of Science ®Google Scholar
• Stein SW, Myrdal PB. (2006). The relative influence of atomization and evaporation on metered dose inhaler drug delivery efficiency. Aerosol Sci Technol, 40:335–347.
   Web of Science ®Google Scholar
• Smyth HD. (2003). The influence of formulation variables on the performance of alternative propellant-driven metered dose inhalers. Adv Drug Deliv Rev, 55:807–828.
   PubMed Web of Science ®Google Scholar
• Dalby RN, Byron PR. (1988). Comparison of output particle size distributions from pressurized aerosols formulated as solutions or suspensions. Pharm Res, 5:36–39.
   PubMed Web of Science ®Google Scholar
• Brambilla G, Ganderton D, Garzia R, Lewis D, Meakin B, Ventura P. (1999). Modulation of aerosol clouds produced by pressurised inhalation aerosols. Int J Pharm, 186:53–61.
   PubMed Web of Science ®Google Scholar
• Ganderton D, Lewis D, Davies R, Meakin B, Brambilla G, Church T. (2002). Modulite: a means of designing the aerosols generated by pressurized metered dose inhalers. Respir Med, 96 Suppl D:S3–S8.
   PubMed Web of Science ®Google Scholar
• Ganderton D, Lewis D, Davies R, Meakin B, Church T. (2003). The formulation and evaluation of a CFC-free budesonide pressurised metered dose inhaler. Respir Med, 97 Suppl D:S4–S9.
   PubMed Web of Science ®Google Scholar
• Traini D, Young PM, Price R, Rogueda P. (2006). A novel apparatus for the determination of solubility in pressurized metered dose inhalers. Drug Dev Ind Pharm, 32:1159–1163.
   PubMed Web of Science ®Google Scholar
• Haynes A, Shaik MS, Krarup H, Singh M. (2004). Evaluation of the Malvern Spraytec with inhalation cell for the measurement of particle size distribution from metered dose inhalers. J Pharm Sci, 93:349–363.
   PubMed Web of Science ®Google Scholar
• Buttini F, Grainger CI, Jones SA, Royall PG, Martin PG, Forbes B. (2008). Characterization of particles emitted from two formulations of beclomethasone dipropionate solutoin metered dose inhalers. RDD, 2:581–584.
   Google Scholar
• Heng D, Tang P, Cairney JM, Chan HK, Cutler DJ, Salama R et al. (2007). Focused-ion-beam milling: a novel approach to probing the interior of particles used for inhalation aerosols. Pharm Res, 24:1608–1617.
   PubMed Web of Science ®Google Scholar
• Hoye JA, Myrdal PB. (2008). Measurement and correlation of solute solubility in HFA-134a/ethanol systems. Int J Pharm, 362:184–188.
   PubMed Web of Science ®Google Scholar
• Tajber L, Corrigan DO, Corrigan OI, Healy AM. (2009). Spray drying of budesonide, formoterol fumarate and their composites–I. Physicochemical characterisation. Int J Pharm, 367:79–85.
   PubMed Web of Science ®Google Scholar
• Carr AG, Mammucari R, Foster NR. (2011). Particle formation of budesonide from alcohol-modified subcritical water solutions. Int J Pharm, 405:169–180.
   PubMed Web of Science ®Google Scholar
• Martin TM, Bandi N, Shulz R, Roberts CB, Kompella UB. (2002). Preparation of budesonide and budesonide-PLA microparticles using supercritical fluid precipitation technology. AAPS PharmSciTech, 3:E18.
   PubMedGoogle Scholar
• Simonoska Crcarevska M, Glavas Dodov M, Goracinova K. (2008). Chitosan coated Ca-alginate microparticles loaded with budesonide for delivery to the inflamed colonic mucosa. Eur J Pharm Biopharm, 68:565–578.
   PubMed Web of Science ®Google Scholar
• Nolan LM, Tajber L, McDonald BF, Barham AS, Corrigan OI, Healy AM. (2009). Excipient-free nanoporous microparticles of budesonide for pulmonary delivery. Eur J Pharm Sci, 37:593–602.
   PubMed Web of Science ®Google Scholar
• Hecht JP, King CJ. (2000). Spray drying: influence of developing drop morphology on drying rates and retention of volatile substances. 1. Single-drop experiments. Ind Eng Chem Res, 39:1756–1765.
   Web of Science ®Google Scholar
• Kuhli M, Weiss M, Steckel H. (2010). Characterisation of solution-based pressurised metered-dose inhaler aerosols with an optical particle counter. Eur J Pharm Biopharm, 75:393–398.
   PubMed Web of Science ®Google Scholar
• Adhikari B, Howes T, Bhandari B, Truong V. (2000). Experimental studies and kinetics of single drop drying and their relevance in drying of sugar rich foods: a review. Int J Food Prop, 3:323–351.
   Web of Science ®Google Scholar
• Vervaet C, Byron PR. (1999). Drug-surfactant-propellant interactions in HFA-formulations. Int J Pharm, 186:13–30.
   PubMed Web of Science ®Google Scholar
• Williams III RO, Liu J. (1998). Influence of formulation additives on the vapor pressure of hydrofluoroalkane propellants. Int J Pharm, 166:99–103.
   Web of Science ®Google Scholar
• Williams RO 3rd, Repka M, Liu J. (1998). Influence of propellant composition on drug delivery from a pressurized metered-dose inhaler. Drug Dev Ind Pharm, 24:763–770.
   PubMed Web of Science ®Google Scholar
• Hickey A, Evans R. Aerosol generation from propellant-driven metered dose inhalers. Lung Biology In Health And Disease, 94:417–439.
   Google Scholar
• Ju D, Shrimpton J, Hearn A. (2010). The effect of reduction of propellant mass fraction on the injection profile of metered dose inhalers. Int J Pharm, 391:221–229.
   PubMed Web of Science ®Google Scholar
• Lewis DA, Ganderton D, Meakin BJ, Brambilla G. (2004). Theory and practice with solution systems. RDD IX, 109–116.
   Google Scholar
• Keller M. (1999). Innovations and perspectives of metered dose inhalers in pulmonary drug delivery. Int J Pharm, 186:81–90.
   PubMed Web of Science ®Google Scholar
• Gelfand B. (1996). Droplet breakup phenomena in flows with velocity lag. Prog Energ Combust, 22:201–265.
   Web of Science ®Google Scholar
• Hoe S, Traini D, Chan HK, Young PM. (2009). The influence of flow rate on the aerosol deposition profile and electrostatic charge of single and combination metered dose inhalers. Pharm Res, 26:2639–2646.
   PubMed Web of Science ®Google Scholar
• Clark AR. Metered atomisation for respiratory drug delivery. PhD Thesis. 1991:Loughborough University, UK.
   Google Scholar
• Dunbar C. (1997). Atomizaion mechanism of the pressurized metered dose inhaler. Particulate science and technology, 15:253–271.
   Web of Science ®Google Scholar
• Dunbar CA, Watkins AP, Miller JF. (1997). An experimental investigation of the spray issued from a pMDI using laser diagnostic techniques. J Aerosol Med, 10:351–368.
   PubMedGoogle Scholar
• Smith KJ, Chan HK, Brown KF. (1998). Influence of flow rate on aerosol particle size distributions from pressurized and breath-actuated inhalers. J Aerosol Med, 11:231–245.
   PubMedGoogle Scholar
• Crosland BM, Johnson MR, Matida EA. (2009). Characterization of the spray velocities from a pressurized metered-dose inhaler. J Aerosol Med Pulm Drug Deliv, 22:85–97.
   PubMed Web of Science ®Google Scholar
• Wigley G, Versteeg H, Hodson D. (2002). Near-orifice PDA measurements and atomisation mechanism of a pharmaceutical pressurised metered dose inhaler. Zaragoza, 9:11.
   Google Scholar
• Smyth HDC. (2003). Multimodal particle size distributions emitted from HFA-134a solution pressurized metered-dose inhalers. AAPS PharmSciTech, 4:76–86.
   Google Scholar
• Dunbar C, Watkins AP, Miller J. (1997). Theoretical investigation of the spray from a pressurized metered-dose inhaler. Atomization Sprays, 7:417–436.
   Web of Science ®Google Scholar
• El-Sayed TM, Wallack DA, King CJ. (1990). Changes in particle morphology during drying of drops of carbohydrate solutions and food liquids. 1. Effect of composition and drying conditions. Ind Eng Chem Res, 29:2346–2354.
   Web of Science ®Google Scholar
• Steckel H, Müller BW. (1998). Metered-dose inhaler formulations with beclomethasone-17,21-dipropionate using the ozone friendly propellant R 134a. Eur J Pharm Biopharm, 46:77–83.
   PubMed Web of Science ®Google Scholar
• Reid ML, Jones SA, Brown MB. (2009). Transient drug supersaturation kinetics of beclomethasone dipropionate in rapidly drying films. Int J Pharm, 371:114–119.
   PubMed Web of Science ®Google Scholar
• Dirksen J, Ring T. (1991). Fundamentals of crystallization: kinetic effects on particle size distributions and morphology. Chem Eng Sci, 46:2389–2427.
   Web of Science ®Google Scholar
• McKenzie L, Oliver M. (2000). Evaluation of the particle formation process after actuation of solution MDIs. J Aerosol Med, 13:59.
   PubMedGoogle Scholar
• Hecht JP, King CJ. (2000). Spray drying: Influence of developing drop morphology on drying rates and retention of volatile substances. 2. Modeling. Ind Eng Chem Res, 39:1766–1774.
   Web of Science ®Google Scholar