In vitro/in vivo evaluation of felodipine micropowders prepared by the wet-milling process combined with different solidification methods

References

• Amidon GL, Lennernös H, Shah VP, et al. A theoretical basis for a biopharmaceutic drug classification: the correlation of in vitro drug product dissolution and in vivo bioavailability. Pharm Res 1995;12:413–20
   PubMed Web of Science ®Google Scholar
• Tanaka Y, Inkyo M, Yumoto R, et al. Nanoparticulation of probucol, a poorly water-soluble drug, using a novel wet-milling process to improve in vitro dissolution and in vivo oral absorption. Drug Dev Ind Pharm 2012;38:1015–23
   PubMed Web of Science ®Google Scholar
• Wang P, Luo Q, Miao Y, et al. Improved dissolution rate and bioavailability of fenofibrate pellets prepared by wet-milled-drug layering. Drug Dev Ind Pharm 2012;38:1344–53
   PubMed Web of Science ®Google Scholar
• Papadimitriou SA, Barmpalexis P, Karavas E, et al. Optimizing the ability of PVP/PEG mixtures to be used as appropriate carriers for the preparation of drug solid dispersions by melt mixing technique using artificial neural networks: I. Eur J Pharm Biopharm 2012;82:175–86
   PubMed Web of Science ®Google Scholar
• Won DH, Kim MS, Lee S, et al. Improved physicochemical characteristics of felodipine solid dispersion particles by supercritical anti-solvent precipitation process. Int J Pharm 2005;301:199–208
   PubMed Web of Science ®Google Scholar
• Lee KR, Kim EJ, Seo SW, et al. Effect of poloxamer on the dissolution of felodipine and preparation of controlled release matrix tablets containing felodipine. Arch Pharm Res 2008;31:1023–8
   PubMed Web of Science ®Google Scholar
• Vogt M, Kunath K, Dressman JB. Dissolution improvement of four poorly water soluble drugs by cogrinding with commonly used excipients. Eur J Pharm Biopharm 2008;68:330–7
   PubMed Web of Science ®Google Scholar
• Bazzo GC, Caetano DB, Boch ML, et al. Enhancement of felodipine dissolution rate through its incorporation into Eudragit E–PHB polymeric microparticles: in vitro characterization and investigation of absorption in rats. J Pharm Sci 2012;101:1518--23
   Google Scholar
• Qi S, Belton P, Nollenberger K, et al. Characterisation and prediction of phase separation in hot-melt extruded solid dispersions: a thermal, microscopic and NMR relaxometry study. Pharm Res 2010;27:1869–83
   PubMed Web of Science ®Google Scholar
• Qi S, Belton P, Nollenberger K, et al. Compositional analysis of low quantities of phase separation in hot-melt-extruded solid dispersions: a combined atomic force microscopy, photothermal fourier-transform infrared microspectroscopy, and localised thermal analysis approach. Pharm Res 2011;28:2311–26
   PubMed Web of Science ®Google Scholar
• Marsac PJ, Rumondor AC, Nivens DE, et al. Effect of temperature and moisture on the miscibility of amorphous dispersions of felodipine and poly(vinyl pyrrolidone). J Pharm Sci 2010;99:169–85
   PubMed Web of Science ®Google Scholar
• Zhang J, Bunker M, Parker A, et al. The stability of solid dispersions of felodipine in polyvinylpyrrolidone characterized by nanothermal analysis. Int J Pharm 2011;414:210–17
   PubMed Web of Science ®Google Scholar
• Ivanisevic I. Physical stability studies of miscible amorphous solid dispersions. J Pharm Sci 2010;99:4005–12
   PubMed Web of Science ®Google Scholar
• Rumondor AC, Taylor LS. Effect of polymer hygroscopicity on the phase behavior of amorphous solid dispersions in the presence of moisture. Mol Pharm 2010;7:477–90
   PubMed Web of Science ®Google Scholar
• Alonzo DE, Gao Y, Zhou D, et al. Dissolution and precipitation behavior of amorphous solid dispersions. J Pharm Sci 2011;100:3316–31
   PubMed Web of Science ®Google Scholar
• Rumondor AC, Stanford LA, Taylor LS. Effects of polymer type and storage relative humidity on the kinetics of felodipine crystallization from amorphous solid dispersions. Pharm Res 2009;26:2599–606
   PubMed Web of Science ®Google Scholar
• Gahoi S, Jain GK, Tripathi R, et al. Enhanced antimalarial activity of lumefantrine nanopowder prepared by wet-milling DYNO MILL technique. Colloids Surf B Biointerfaces 2012;95:16–22
   PubMed Web of Science ®Google Scholar
• Monteiro A, Afolabi A, Bilgili E. Continuous production of drug nanoparticle suspensions via wet stirred media milling: a fresh look at the Rehbinder effect. Drug Dev Ind Pharm 2013;39:266–83
   PubMed Web of Science ®Google Scholar
• Liu P, Rong X, Laru J, et al. Nanosuspensions of poorly soluble drugs: preparation and development by wet milling. Int J Pharm 2011;411:215–22
   PubMed Web of Science ®Google Scholar
• Ghosh I, Schenck D, Bose S, et al. Optimization of formulation and process parameters for the production of nanosuspension by wet media milling technique: effect of vitamin E TPGS and nanocrystal particle size on oral absorption. Eur J Pharm Sci 2012;47:718–28
   PubMed Web of Science ®Google Scholar
• Padhi BK, Chougule MB, Misra A. Aerosol performance of large respirable particles of amikacin sulfate produced by spray and freeze drying techniques. Curr Drug Deliv 2009;6:8–16
   PubMedGoogle Scholar
• Wang Y, Kho K, Cheow WS, et al. A comparison between spray drying and spray freeze drying for dry powder inhaler formulation of drug-loaded lipid-polymer hybrid nanoparticles. Int J Pharm 2012;424:98–106
   PubMed Web of Science ®Google Scholar
• Luis H, Miglioranca REB-A, Schug BS, et al. Felodipine quantification in human plasma by high-performance liquid chromatography coupled to tandem mass spectrometry. J Chromatogr B 2005;814:217–23
   PubMed Web of Science ®Google Scholar
• Zhang L, Chai G, Zeng X, et al. Preparation of fenofibrate immediate-release tablets involving wet grinding for improved bioavailability. Drug Dev Ind Pharm 2010;36:1054–63
   PubMed Web of Science ®Google Scholar
• Srčič S, Kerč J, Urleb U, et al. Investigation of felodipine polymorphism and its glassy state. Int J Pharm 1992;87:1–10
   Web of Science ®Google Scholar
• Niwa T, Miura S, Danjo K. Universal wet-milling technique to prepare oral nanosuspension focused on discovery and preclinical animal studies – development of particle design method. Int J Pharm 2011;405:218–27
   PubMed Web of Science ®Google Scholar
• Ali HS, York P, Ali AM, et al. Hydrocortisone nanosuspensions for ophthalmic delivery: a comparative study between microfluidic nanoprecipitation and wet milling. J Control Release 2011;149:175–81
   PubMed Web of Science ®Google Scholar
• Saluja V, Amorij JP, Kapteyn JC, et al. A comparison between spray drying and spray freeze drying to produce an influenza subunit vaccine powder for inhalation. J Control Release 2010;144:127–33
   PubMed Web of Science ®Google Scholar
• Seville PC, Kellaway IW, Birchall JC. Preparation of dry powder dispersions for non-viral gene delivery by freeze-drying and spray-drying. J Gene Med 2002;4:428–37
   PubMed Web of Science ®Google Scholar
• Lane ME, Brennan FS, Corrigan OI. Comparison of post-emulsification freeze drying or spray drying processes for the microencapsulation of plasmid DNA. J Pharm Pharmacol 2005;57:831–8
   PubMed Web of Science ®Google Scholar
• Bhakay A, Merwade M, Bilgili E, et al. Novel aspects of wet milling for the production of microsuspensions and nanosuspensions of poorly water-soluble drugs. Drug Dev Ind Pharm 2011;37:963--76
   Google Scholar