References
- Abberger T. Influence of binder properties, method of addition, powder type and operating conditions on fluid-bed melt granulation and resulting tablet properties. Pharmazie 2001;56:949–52
- Seo A, Holm P, Kristensen HG, Schaefer T. The preparation of agglomerates containing solid dispersions of diazepam by melt agglomeration in a high shear mixer. Int J Pharm 2003;259:161–71
- Heng PWS, Wong TW. Melt processes for oral solid dodsage forms. In: Swarbrick J, ed. Encyclopedia of pharmaceutical technology. 3rd ed. New York: Taylor & Francis Group; 2006:2257–61
- Kidokoro M, Haramiishi Y, Sagasaki S, Yamamoto Y. Application of fluidised hot-melt granulation (FHMG) for the preparation of granules for tableting. Drug Dev Ind Pharm 2002;28:67–76
- Seo A, Holm P, Schaefer T. Effects of droplet size and type of binder on the agglomerate growth mechanisms by melt agglomeration in a fluidised bed. Eur J Pharm Sci 2002;16:95–105
- Huang J, Goolcharran C, Utz J, et al. A PAT approach to enhance process understanding of fluid bed granulation using in-line particle size characterization and multivariate analysis. J Pharm Innov 2010;5:58–68
- Preikschat FK, Preikschat E. Apparatus and method for particle analysis. United States Patent 4871251, 1989
- Aizu Y, Asakura T. Principles and development of spatial filtering velocimetry. Appl Phys 1987;B43:209–24
- Hu X, Cunningham JC, Winstead D. Study growth kinetics in fluidized bed granulation with at-line FBRM. Int J Pharm 2008;347:54–61
- Tok AT, Goh X, Ng WK, Tan RBH. Monitoring granulation rate processes using three PAT tools in a pilot-scale fluidized bed. AAPS PharmSciTech 2008;9:1083–91
- Alshihabi F, Vandamme T, Betz G. Focused beam reflectance method as an innovative (PAT) tool to monitor in-line granulation process in fluidized bed. Pharm Dev Technol 2013;18:73–84
- Närvänen T, Lipsanen T, Antikainen O, et al. Gaining fluid bed process understanding by in-line particle size analysis. J Pharm Sci 2009;98:1110–17
- Närvänen T, Antikainen O, Yliruusi J. Predicting particle size during fluid bed granulation using process measurement data. AAPS PharmSciTech 2009;10:1268–75
- Ruf A, Worlitschek J, Mazzotti M. Modeling and experimental analysis of PSD measurements through FBRM. Int J Pharm 2000;17:167–79
- Petrak D, Rauh H. Optical probe for the in-line determination of particle shape, size, and velocity. Part Sci Technol 2006;24:381–94
- Heath AR, Fawell PD, Bahri PA, Swift JD. Estimating average particle size by focused beam reflectance measurement (FBRM). Part Part Syst Charact 2002;19:84–95
- Petrak D. Simultaneous measurement of particle size and particle velocity by the spatial filtering technique. Part Part Syst Charact 2002;19:391–400
- Bloemen HHJ, De Kroon MGM. Transformation of chord length distributions into particle size distributions using least squares techniques. Part Sci Technol 2005;23:377–86
- Kukec S, Vrečer F, Dreu R. A study of in situ fluid bed melt granulation using response surface methodology. Acta Pharm 2012;62:497–513
- FDA, Center for Drug Evaluation and Research (CDER). Guidance for Industry, PAT – a framework for innovative pharmaceutical development, manufacturing, and quality assurance. Rockville (MD):FDA; 2004 . Available from: http://www.fda.gov/downloads/Drugs/Guidances/ucm070305.pdf [last accessed 25 Nov 2012]
- D. Teslić. Gas distribution plate intended for use in devices for treating solid particles, WIPO Pat. WO2011031244, 2011
- Mettler-Toledo. iC FBRM Software guide: MK-PB-0022-AC, Rev C. September, 2011
- Burggraeve A, Van Den Kerkhof T, Hellings M, et al. Evaluation of in-line spatial filter velocimetry as PAT monitoring tool for particle growth during fluid bed granulation. Eur J Pharm Biopharm 2010;76:138–46