References
- Novoa GAG, Heinämäki J, Mirza S, et al. Physical solid-state properties and dissolution of sustained-release matrices of polyvinylacetate. Eur J Pharm Biopharm 2005;59:343–50
- Kranz H, Wagner T. Effects of formulation and process variables on the release of a weakly basic drug from single unit extended release formulations. Eur J Pharm Biopharm 2006;62:70–6
- Sahoo J, Murthy PN, Biswal S, Manik G. Formulation of sustained-release dosage form of verapamil hydrochloride by solid dispersion technique using eudragit RLPO or Kollidon® SR. AAPS Pharm Sci Tech 2009;10:27–33
- Sakr W, Alanazi F, Sakr A. Effect of Kollidon® SR on the release of Albuterol Sulphate from matrix tablets. Saudi Pharm J 2011;19:19–27
- Szente V, Süvegh K, Marek T, Zelkó R. Prediction of the stability of polymeric matrix tablets containing famotidine from the positron annihilation lifetime distributions of their physical mixtures. J Pharmaceut Biomed 2009;49:711–14
- zgüney I, Shuwisitkul D, Bodmeier R. Development and characterization of extended release Kollidon® SR mini-matrices prepared by hot-melt extrusion. Eur J Pharm Biopharm 2009;73:140–5
- Sahoo J, Murthy PN, Bisoval S, Mahapatra AK. Comparative study of propranolol hydrochloride release from matrix tablets with Kollidon® SR or hydroxy propyl methyl cellulose. AAPS Pharm Sci Tech 2008;9:577–82
- Aitken-nichol C, Zhang F, McGinity JW. Hot melt extrusion of acrylic films. Pharm Res 1996;13:804–8
- Crowley MM, Fredersdorf A, Schroeder B, et al. The influence of guaifenesin and ketoprofen on the properties of hot-melt extruded polyethylene oxide films. Eur J Pharm Sci 2004;22:409–18
- Siepmann F, Brun VL, Siepmann J. Drugs acting as plasticizers in polymeric systems: a quantitative treatment. J Control Release 2006;115:298–306
- Jenquin MR, Liebowitz SM, Sarabia RE, McGinity JW. Physical and chemical factors influencing the release of drugs from acrylic resin films. J Pharm Sci 1990;79:811–16
- Wu C, McGinity JW. Non-traditional plasticization of polymeric films. Int J Pharm 1999;177:15–27
- Wu C, McGinity JW. Influence of ibuprofen as a solid-state plasticizer in Eudragit®RS 30 D on the physicochemical properties of coated beads. AAPS Pharm Sci Tech 2001;2:1–9
- Zhu Y, Shah NH, Malick W, et al. Solid-state plasticization of an acrylic polymer with chlorpheniramine maleate and triethyl citrate. Int J Pharm 2002;241:301–10
- Abbaspour MR, Sadeghi F, Garekani HA. Thermal treating as a tool to produce plastic pellets based on Eudragit RS PO and RL PO aimed for tableting. Eur J Pharm Biopharm 2007;67:260–7
- Repka MA, Gerding TG, Repka SL, McGinity JW. Influence of plasticizers and drugs on the physical-mechanical properties of hydroxypropylcellulose films prepared by hot melt extrusion. Drug Dev Ind Pharm 1999;25:625–33
- Okhamafe AO, York P. Studies of interaction phenomena in aqueous-based film coatings containing soluble additives using thermal analysis techniques. J Pharm Sci 1988;77:438–43
- Claeys B, Coen RD, De Geest BG, et al. Structural modifications of polymethacrylates: impact on thermal behavior and release characteristics of glassy solid solutions. Eur J Pharm Biopharm 2013;85:1206–14
- Schneider HA. The Gordon-Taylor equation. Additivity and interaction in compatible polymer blends. Die Makromolekulare Chemie 1988;189:1941–55
- Kuo SW, Chang FC. Miscibility and hydrogen bonding in blends of poly(vinylphenol-co-methyl methacrylate) with poly(ethylene oxide). Macromolecules 2001;34:4089–97
- Kuo SW, Huang CF, Chang FC. Study of hydrogen-bonding strength in poly(ɛ-caprolactone) blends by DSC and FTIR. J Polym Sci Part B: Polym Phys 2001;39:1348–59
- Maldonado-Santoyo M, Ortíz-Estrada C, Luna-Bárcenas G, et al. Miscibility behavior and hydrogen bonding in blends of poly(vinyl phenyl ketone hydrogenated) and poly(2-ethyl-2-oxazoline). J Polym Sci Part B: Polym Phys 2004;42:636–45
- Wiranidchapong C, Tucker IG, Rades T, Kulvanich P. Miscibility and interactions between 17β-estradiol and Eudragit® RS in solid dispersion. J Pharm Sci 2008;97:4879–88
- Wiranidchapong C, Rades T, Kulvanich P, Tucker IG. Method of preparation does not affect the miscibility between steroid hormone and polymethacrylate. Thermochim Acta 2009;485:57–64
- Wiranidchapong C. Solid state and thermal behavior of 17β-Estradiol in ammonioethyl methacrylate ester copolymer. In: Dubey RK, ed. Sex hormones. Croatia: InTech; 2012:403–30
- Oksanen CA, Zografi G. The relationship between the glass transition temperature and water vapor absorption by poly(vinylpyrrolidone). Pharm Res 1990;7:654–7
- Passerini N, Craig DQM. An investigation into the effects of residual water on the glass transition temperature of polylactide microspheres using modulated temperature DSC. J Control Release 2001;73:111–15
- Blasi P, D'Souza SS, Selmin F, DeLuca PP. Plasticizing effect of water on poly(lactide-co-glycolide). J Control Release 2005;108:1–9
- Hauschild K, Picker-Freyer KM. Evaluation of tableting and tablet properties of Kollidon SR: the influence of moisture and mixtures with theophylline monohydrate. Pharm Dev Technol 2006;11:125–40
- Zelkó R, Süvegh K. Correlation between the release characteristics of theophylline and the free volume of polyvinylpyrrolidone. Eur J Pharm Sci 2005;24:351–4
- Zelkó R, Orbán Á, Süvegh K. Tracking of the physical ageing of amorphous pharmaceutical polymeric excipients by positron annihilation spectroscopy. J Pharmaceut Biomed 2006;40:249–54
- AlKhatib H, Hamed S, Mohammad M, et al. Effects of thermal curing conditions on drug release from polyvinyl acetate-polyvinyl pyrrolidone matrices. AAPS Pharm Sci Tech 2010;11:253–66
- Grund J, Koerber M, Walther M, Bodmeier R. The effect of polymer properties on direct compression and drug release from water-insoluble controlled release matrix tablets. Int J Pharmaceut 2014;469:94–101
- Nafee NA, Ismail FA, Boraie NA, Mortada LM. Mucoadhesive buccal patches of miconazole nitrate: in vitro/in vivo performance and effect of ageing. Int J Pharm 2003;264:1–14
- Potthast H, Dressman JB, Junginger HE, et al. Biowaiver monographs for immediate release solid oral dosage forms: Ibuprofen. J Pharm Sci 2005;94:2121–31
- Moneghini M, Bellich B, Baxa P, Princivalle F. Microwave generated solid dispersions containing Ibuprofen. Int J Pharm 2008;361:125–30
- Shuwisitkul D. Biodegradable implants with different drug release profiles [Doctor rerum naturalium dissertation]. Berlin: Biology, Chemistry and Pharmacy, Freie Universität; 2011
- Silverstein RM, Bassler GC, Morrill TC. Infrared spectroscopy. In: Stiefel J, ed. Spectrometric identification of organic compounds. Singapore: John Wiley and Sons, Inc.; 1991:91–164
- Mallick S, Pattnaik S, Swain K, et al. Formation of physically stable amorphous phase of ibuprofen by solid state milling with kaolin. Eur J Pharm Biopharm 2008;68:346–51
- Newa M, Bhandari KH, Li DX, et al. Preparation and evaluation of immediate release ibuprofen solid dispersions using polyethylene glycol 4000. Biol Pharm Bull 2008;31:939–45
- Kazarian SG, Martirosyan GG. Spectroscopy of polymer/drug formulations processed with supercritical fluids: in situ ATR-IR and Raman study of impregnation of ibuprofen into PVP. Int J Pharm 2002;232:81–90
- Paradkar AR, Maheshwari M, Ketkar AR, Chauhan B. Preparation and evaluation of ibuprofen beads by melt solidification technique. Int J Pharm 2003;255:33–42
- Velasco D, Danoux ChB, Redondo JA, et al. pH-sensitive polymer hydrogels derived from morpholine to prevent the crystallization of ibuprofen. J Control Release 2011;149:140–5
- Michaelis M, Brummer R, Leopold CS. Plasticization and antiplasticization of an acrylic pressure sensitive adhesive by ibuprofen and their effect on the adhesion properties. Eur J Pharm Biopharm 2014;86:234–43