Efficacy of screens in removing long fibers from an aerosol stream – sample preparation technique for toxicology studies

References

• Baron PA, Deye GJ, Fernback J. (1994). Length separation of fibers. Aerosol Sci Technol 21:179–92
   Web of Science ®Google Scholar
• Baron PA. (2001). Measurement of airborne fibers: a review. Ind Health 39:39–50
   PubMed Web of Science ®Google Scholar
• Blake T, Castranova V, Schwegler-Berry D, et al. (1998). Effect of fiber length on glass microfiber cytotoxicity. J Toxicol Environ Health A 54:243–59
   PubMed Web of Science ®Google Scholar
• Brockmann JE, Rader DJ. (1990). APS response to nonspherical particles and experimental-determination of dynamic shape factor. Aerosol Sci Technol 13:162–72
   Web of Science ®Google Scholar
• Broday D, Fichman M, Shapiro M, Gutfinger C. (1997). Motion of diffusionless particles in vertical stagnation flows. II. Deposition efficiency of elongated particles. J Aerosol Sci 28:35–52
   Web of Science ®Google Scholar
• Chen BT, Yeh HC, Hobbs CH. (1993). Size classification of carbon-fiber aerosols. Aerosol Sci Technol 19:109–20
   Web of Science ®Google Scholar
• Cheng YS, Chen BT, Yeh HC. (1990). Behavior of isometric nonspherical aerosol-particles in the aerodynamic particle sizer. J Aerosol Sci 21:701–10
   Web of Science ®Google Scholar
• Cox RG. (1970). The motion of long slender bodies in a viscous fluid I: General theory. J Fluid Mech 44:791–810
   Google Scholar
• Deye GJ, Gao P, Baron PA, Fernback J. (1999). Performance evaluation of a fiber length classifier. Aerosol Sci Technol 30:420–37
   Web of Science ®Google Scholar
• Dodson RF, Atkinson MA, Levin JL. (2003). Asbestos fiber length as related to potential pathogenicity: a critical review. Am J Ind Med 44:291–7
   PubMed Web of Science ®Google Scholar
• Donaldson K, Poland CA. (2009). Nanotoxicology: new insights into nanotubes. Nat Nanotechnol 4:708–10
   PubMed Web of Science ®Google Scholar
• Fuchs NA. (1964). The mechanics of aerosols. Oxford: Pergamon Press, 37–46
   Google Scholar
• Gans R. (1911). Sitzunder (Math. – Phys.) Klasse Akad Wiss 41:191–203
   Google Scholar
• Gonda I, Abd El Khalik AF. (1985). On the calculation of aerodynamic diameters of fibers. Aerosol Sci Technol 4:233–8
   Web of Science ®Google Scholar
• Griffiths WD, Vaughan NP. (1986). The aerodynamic behavior of cylindrical and spheroidal particles when settling under gravity. J Aerosol Sci 17:53–65
   Web of Science ®Google Scholar
• Hinds WC. (1999). Aerosol technology: properties, behavior, and measurement of airborne particles. New York, USA: John Wiley & Sons
   Google Scholar
• Jeffery GB. (1922). The motion of ellipsoidal particles immersed in a viscous fluid. Proc R Soc Lond 102:161–79
   Google Scholar
• Kasper G, Shaw DT. (1983). Comparative size distribution measurements on chain aggregates. Aerosol Sci Technol 2:369–81
   Web of Science ®Google Scholar
• Kisin ER, Murray AR, Sargent L, et al. (2011). Genotoxicity of carbon nanofibers: are they potentially more or less dangerous than carbon nanotubes or asbestos? Toxicol Appl Pharmacol 252:1–10
   PubMed Web of Science ®Google Scholar
• Kohyama N, Tanaka I, Tomita M, et al. (1997). Preparation and characteristics of standard reference samples of fibrous minerals for biological experiments. Ind Health 35:415–32
   PubMed Web of Science ®Google Scholar
• Ku BK, Deye G, Turkevich LA. (2012). Characterization of a vortex shaking method for producing airborne glass fibers for toxicology studies. Nanotechnology 2012, Volume 3: Bio Sensors, instruments, medical, environment and energy. Chapter 5: Environment, health & safety. Technical Proceedings of the 2012 NSTI (NSTI-Nano Science and Technology Institute, Taylor & Francis, Boca Raton, FL, 2013), Nanotechnology Conference and Expo, June 18–21, 2012, Santa Clara, California, p 358
   Google Scholar
• Ku BK, Deye G, Turkevich LA. (2013). Characterization of a vortex shaking method for aerosolizing fibers. Aerosol Sci Technol 12:1293–301
   Google Scholar
• Ku BK, Emery MS, Maynard AD, et al. (2006). In situ structure characterization of airborne carbon nanofibres by a tandem mobility-mass analysis. Nanotechnology 17:3613–21
   PubMed Web of Science ®Google Scholar
• Morigi MP, Giacomelli GM, Prodi V. (1999). Mineral fibre sampling and size selection. Ann Occup Hyg 43:117–24
   PubMedGoogle Scholar
• Myojo T. (1999). A simple method to determine the length distribution of fibrous aerosols. Aerosol Sci Technol 30:30–9
   Web of Science ®Google Scholar
• Nel A, Xia T, Mädler L, Li N. (2006). Toxic potential of materials at the nanolevel. Science 311:622–7
   PubMed Web of Science ®Google Scholar
• NIOSH. (2007). Progress toward safe nanotechnology in the workplace: a report from the NIOSH Nanotechnology Research Center [DHHS (NIOSH) Publication No. 2007-123]. Available from: http://www.cdc.gov/niosh/docs/2007-123/pdfs/2007-123.pdf. [Last accessed: Mar 2011].
   Google Scholar
• NIOSH. (2009). Approaches to safe nanotechnology: managing the health and safety concerns associated with engineered nanomaterials [DHHS (NIOSH) Publication No. 2009-125]. Available from: http://www.cdc.gov/niosh/docs/2009-125/pdfs/2009-125.pdf. [Last accessed: Mar 2011].
   Google Scholar
• NIOSH (2011). Asbestos fibers and other elongate mineral particles: state of the science and roadmap for research [DHHS (NIOSH) Publication No. 2011-159]. Available from: http://www.cdc.gov/niosh/docs/2011-159/pdfs/2011-159.pdf. [Last accessed: Jan 2012].
   Google Scholar
• Oberdörster G, Maynard A, Donaldson K, et al. (2005). Principles for characterizing the potential human health effects from exposure to nanomaterials: elements of a screening strategy. Part Fiber Toxicol 2:8 (1--35)
   Web of Science ®Google Scholar
• Oseen CW. (1915). Uber den Wiederstand gegen die gleichmassige Translation eines. Ellipsoides in einer reibenden Flussigkeit. Arch Math Phys 24:108–14
   Google Scholar
• Oseen CW. (1927). Mathematik und ihre Anwendungen in Monographien und Lehrbüchern. In: Hilb E. (ed.) Neuere Methoden und Ergebnisse in der Hydrodynamik, Vol. 1. Leipzig: Akademischer Verlagsgesellschaft
   Google Scholar
• Poland CA, Duffin R, Kinloch I, et al. (2008). Carbon nanotubes introduced into the abdominal cavity of mice show asbestos-like pathogenicity in a pilot study. Nat Nanotechnol 3:423–8
   PubMed Web of Science ®Google Scholar
• Prodi V, Dezaiacomo T, Hochrainer D, Spurny K. (1982). Fiber collection and measurement with the inertial spectrometer. J Aerosol Sci 13:49–58
   Web of Science ®Google Scholar
• Shvedova AA, Kisin ER, Mercer R, et al. (2005). Unusual inflammatory and fibrogenic pulmonary responses to single-walled carbon nanotubes in mice. Am J Physiol Lung Cell Mol Physiol 289:L698–708
   PubMed Web of Science ®Google Scholar
• Spurny KR, Stober W, Opiela H, Weiss G. (1979). Size-selective preparation of inorganic fibers for biological experiments. Am Ind Hyg Assoc J 40:20–38
   PubMed Web of Science ®Google Scholar
• Spurny KR. (1980). Fiber generation and length classification. In: Willeke K. (ed.) Generation of aerosols and facilities for exposure experiments. Ann Arbor, MI: Ann Arbor Sciences Publishers, 257–98
   Google Scholar
• Stanton MF, Layard M, Tegeris A, et al. (1981). Relation of particle dimension to carcinogenicity in amphibole asbestoses and other fibrous minerals. J Natl Cancer Inst 67:965–75
   PubMed Web of Science ®Google Scholar
• Yasuda K, Henmi S, Mori N. (2005). Effects of abrupt expansion geometries on flow-induced fiber orientation and concentration distributions in slit channel flows of fiber suspensions. Polym Compos 26:660–70
   Web of Science ®Google Scholar
• Zeidler-Erdely PC, Calhoun WJ, Ameredes BT, et al. (2006). In vitro cytotoxicity of Manville Code 100 glass fibers: effect of fiber length on human alveolar macrophages. Part Fibre Toxicol 3:5 (1--7)
   Web of Science ®Google Scholar