Flow, packing and compaction properties of novel coprocessed multifunctional directly compressible excipients prepared from tapioca starch and mannitol

References

• Gohel MC, Jogani PD. A review of co-processed directly compressible excipients. J Pharm Pharmceut Sci 2005;8:76–93
   PubMed Web of Science ®Google Scholar
• Saha S, Shahiwala AF. Multifunctional coprocessed excipients for improved tableting performance. Exp Opin Drug Deliv 2009;6:197–208
   PubMed Web of Science ®Google Scholar
• Barot BS, Parejiya PB, Patel TM, et al. Compactability improvement of metformin hydrochloride by crystallization technique. Adv Powder Technol 2012;23:814–823
   Web of Science ®Google Scholar
• Gonnissen Y, Remon JP, Vervaet C. Development of directly compressible powders via co-spray drying. Eur J Pharm Biopharm 2007;67:220–226
   PubMed Web of Science ®Google Scholar
• Adeagbo AA, Alebiowu G. Evaluation of cocoa butter as potential lubricant for co-processing in pharmaceutical tablets. Pharm Dev Technol 2008;13:197–204
   PubMed Web of Science ®Google Scholar
• Maghsoodi M, Hassan-Zadeh D, Barzegar-Jalali M, et al. Improved compaction and packing properties of naproxen agglomerated crystals obtained by spherical crystallization technique. Drug Dev Ind Pharm 2007;33:1216–1224
   PubMed Web of Science ®Google Scholar
• Schneider LCR, Sinka IC, Cocks ACF. Characterisation of the flow behaviour of pharmaceutical powders using a model die–shoe filling system. Powder Technol 2007;173:59–71
   Web of Science ®Google Scholar
• Vasilenko A, Glasser BJ, Muzzio FJ. Shear and flow behaviour of pharmaceutical blends – method comparison study. Powder Technol 2011;208:628–636
   Web of Science ®Google Scholar
• Shinohara K, Oida M, Golman B. Effect of particle shape on angle of internal friction by triaxial compression test. Powder Technol 2000;107:131–136
   Google Scholar
• Suzuki M, Sato H, Hasegawa M, Hirota M. Effect of size distribution on tapping properties of fine powder. Powder Technol 2001;118:53–57
   Google Scholar
• Sandler N, Wilson D. Prediction of granule packing and flow behaviour based on particle size and shape analysis. J Pharm Sci 2010;99:958–968
   PubMed Web of Science ®Google Scholar
• Podczeck F, Miah Y. The influence of particle size and shape on the angle of internal friction and the flow factor of unlubricated and lubricated powders. Int J Pharm 1996;14:187–194
   Google Scholar
• Podczeck F, Sharma M. The influence of particle size and shape of components of binary powder mixtures on the maximum volume reduction due to packing. Int J Pharm 1996;137:41–48
   Web of Science ®Google Scholar
• Alebiowu G, Adeyemi AO. Influence of starch steeping period on the dimensionless disintegration values of a paracetamol tablet formulation. Acta Pol Pharm Drug Res 2009;66:311–320
   PubMedGoogle Scholar
• Alebiowu G, Osinoiki KA. Assessment of tapioca starches obtained after different steeping periods as binders in a paracetamol tablet formulation. Farmacia 2010;58:341–352
   Google Scholar
• Nassab PR, Rajko R, Szabo-Revesz P. Physicochemical characterization of meloxicam–mannitol binary systems. J Pharm Biomed Anal 2006;41:1191–1197
   PubMed Web of Science ®Google Scholar
• Alebiowu G. Steeping period influence on physical, compressional and mechanical properties of tapioca starch. J Pharm Res 2007;6:139–144
   Google Scholar
• Sharma V, Philip AK, Pathak K. Modified polysaccharides as fast disintegrating excipients for orodispersible tablets of roxithromycin. AAPS Pharm Sci Technol 2008;9:87–94
   PubMed Web of Science ®Google Scholar
• Ogunjimi AT, Alebiowu G. Flow and consolidation properties of neem gum coprocessed with two pharmaceutical excipients. Powder Technol 2013;246:187–192
   Web of Science ®Google Scholar
• Hausner HH. Friction conditions in a mass of metal powder. Int J Powder Metall 1967;3:7–13
   Google Scholar
• British Standards Institution. BS 1460:1967: Method for determination of apparent density after compaction of precipitated calcium carbonate; 1967
   Google Scholar
• Kawakita K, Tsutsumi YA. Comparison of equations for powder compression. Bull Chem Soc Jpn 1966;39:1364–1368
   Web of Science ®Google Scholar
• Neumann BS, Bean HS, Becket AH, Carless JE. Advances in pharmaceutical sciences. Vol. 2. London: Academic Press; 1967
   Google Scholar
• Varthalis S, Pilpel N. Anomalies in some properties of powder mixtures. J Pharm Pharmacol 1976;28:415–419
   PubMedGoogle Scholar
• Heckel RW. Density-pressure relationships in powder compaction. Trans Metall Soc AIME 1961;221:671–675
   Google Scholar
• Heckel RW. An analysis of powder compaction phenomena. Trans Metall Soc AIME 1961;221:1001–1008
   Google Scholar
• Fell JT, Newton JM. Determination of tablet strength by diametral compression test. J Pharm Sci 1970;59:688–691
   PubMed Web of Science ®Google Scholar
• Rahmati MR, Vatanara A, Parsian AR, et al. Effect of formulation ingredients on the physical characteristics of salmeterol xinafoate microparticles tailored by spray freeze drying. Adv Powder Technol 2013;24:36–42
   Web of Science ®Google Scholar
• Tewa-Tagne T, Braincon S, Fessi H. Preparation of redispersible dry nanocapsules by means of spray drying: development and characterization. Eur J Pharm Sci 2007;30:124–135
   PubMed Web of Science ®Google Scholar
• Kawase M, Muira K. Fine particle synthesis by continuous precipitation using a tubular reactor. Adv Powder Technol 2007;18:725–738
   Web of Science ®Google Scholar
• Amidon GE, Secreast PJ, Mudie D. Particle, powder, and compact characterization. In: Qiu Y, Chen Y, Zhang GGZ, et al, eds. Developing solid oral dosage forms; pharmaceutical theory and practice. New York: Elsevier Inc; 2009:163–186
   Google Scholar
• Staniforth JN, Aulton ME. Powder flow. In: Aulton ME, ed. Pharmaceutics: the design and manufacture of medicines. 3rd ed. New York: Elsevier; 2007:168–178
   Google Scholar
• Zhou Q, Armstrong B, Larson I, et al. Improving powder flow properties of a cohesive lactose monohydrate powder by intensive mechanical dry coating. J Pharm Sci 2010;99:969–981
   PubMed Web of Science ®Google Scholar
• Ilic I, Kása Jr P, Dreu R, et al. The compressibility and compactibility of different types of lactose. Drug Dev Ind Pharm 2009;35:1271–1280
   PubMed Web of Science ®Google Scholar
• Ludde KH, Kawakita K. Die Pulver compression. Pharmazie 1966;21:393–403
   Web of Science ®Google Scholar
• Alebiowu G, Itiola OA. Compressional characteristics of native and pregelatinized forms of sorghum, plantain, and corn starches and the mechanical properties of their tablets. Drug Dev Ind Pharm 2002;28:663–672
   PubMed Web of Science ®Google Scholar
• Abdullah EC, Geldart D. The use of bulk density measurements as flowability indicators. Powder Technol 1999;102:151–165
   Web of Science ®Google Scholar
• Zhang ZP, Liu LF, Yuan YD, Yu AB. A simulation study of the effects of dynamic variables on the packing of spheres. Powder Technol 2001;116:23–32
   Web of Science ®Google Scholar
• Okore VC. A preliminary study of Dika fat treated talc as a glidants for model granulations. W Afric J Pharm 1999;12:30–33
   Google Scholar
• Joshi AB, Patel S, Kaushal AM, Bansal AK. Compaction studies of alternate solid forms of celecoxib. Adv Powder Technol 2010;21:452–460
   Web of Science ®Google Scholar
• Alderborn G, Nystron C. Radial and axial tensile strength and strength variability of paracetamol tablets. Acta Pharma Seuc 1984;21:1–8
   PubMedGoogle Scholar